Even more good clothes tends to tear in the most unexpected places. You accidentally ran into a nail, or your favorite four-legged creature decided to let out its claws - and here you are, a hole. I don't want to throw away my beautiful new jacket. And there is no need to rush to the garbage chute. In most cases, clothing can be repaired, and it can even be done without the damage being noticeable.
How to fix a hole in a jacket: video
If the jacket is torn at the seam
This is perhaps the easiest option. To solve the problem, just go to a haberdashery store with your jacket to pick out threads that match the color and quality. You can repair such a gap even without a sewing machine. You can simply turn the windbreaker inside out and sew a “back needle” seam in the right place, trying to sew as evenly as possible. Your stitch should be a continuation of the existing machine stitch. To be sure, start sewing a few centimeters before the hole and finish a few centimeters after. If the jacket has a lining, the matter becomes somewhat more complicated. Most correct option– rip the seam of the lining in the right place, close the hole, and then sew up the lining with a blind seam.
If you know how to sew very carefully, you can not rip the lining, but close the hole with a hidden seam
Sticker or applique?
You can cover the hole with a sticker, embroidery or applique. This method has only one, but very significant drawback. Playful designs, monograms and chevrons are not appropriate in all places. If the hole appears on the sleeve or on the chest, you can say that you are lucky. Find a suitable emblem, close the hole, baste, and then blind stitch or topstitch. If you prefer embroidery, make it on a separate piece of fabric, leaving allowances of about 0.5 cm along the edges. Iron the allowances, and then sew your creation to the sleeve or front in much the same way as is done when decorating Ukrainian embroidered shirts.
If the lining is also torn, you will need to mend it first. Select threads of the same quality as the lining itself
Hard case
Unfortunately, holes form not only on sleeves and shelves, but also in any other places. And the edges are not always perfectly smooth. If you are unlucky enough to have a “torn wound” on your jacket, you will have to work hard. Buy adhesive interlining at a haberdashery store. The patch should be slightly larger than the hole. Trim the edges of the hole, being careful not to make it bigger. You just need to get rid of the fringe. Then place the interlining under the wrong side with an adhesive layer to the fabric and press it, trying to prevent bulges and wrinkles. Sometimes you can even baste a patch. Cover the hole on top with a piece of gauze and a sheet of thin paper. Iron the entire structure. Remove the gauze and paper. This method is not suitable for any fabric. It’s unlikely that cloth or drape can be sealed, but polyester can be sealed.
You can seal the hole without interlining. Find a piece of the same fabric that the jacket is made from. Cut out a rectangle and glue it on the wrong side with transparent “Moment”. Spread the edges of the hole as far as possible
Down jackets have become an indispensable element of insulated clothing for winter period. During use, the fabric may become damaged from cuts, cigarettes, or snags. Appearance the product deteriorates instantly, especially if the hole is in a visible place. Find out how to correct the situation in this article.
Damage to the fabric surface of the product can occur in many cases. In this situation, it is not necessary to contact the studio. With a few skills and helpful tips, holes and cuts can be carefully repaired with your own hands.
Key ways:
- glue;
- make a patch;
- sew up.
Before carrying out repairs, it is necessary to prepare tools. They are prepared depending on the chosen method.
Tools:
- fabric for a patch to match the product;
- threads to match the product;
- needle;
- sewing glue;
- scissors.
Now you can take a closer look at the work process.
Sew up carefully
First of all, you need to pay attention to the damage itself. If the hole is small, with smooth edges, it can be picked up with threads.
In order to sew up a cut or hole, it is necessary to treat the damage itself. Carefully trim any protruding threads. If the hole is caused by a cigarette, you must carefully cut off the area where the tissue was burned. For greater convenience, you can use small nail scissors.
When the edges are processed, you can proceed directly to work. To do this, we will need threads to match the product. If you couldn’t find any, you need to use a shade that best matches the color of the down jacket. The seam can be laid either from the outside or from the inside, depending on personal requirements. If the stitches will be located on the outside of the product, you must carefully sew the damaged area with a zigzag seam. A few stitches will be enough for this.
In the case of an internal seam the process is somewhat more complicated. First, we remove the damaged edges. Then, from the wrong side, carefully rip the down jacket and find the place of damage. Slightly bending the edges, sew with a small stitch. When the work is finished, we sew together the previously opened wrong side. The down jacket is repaired.
Reference! When sewing externally, you can also use a loop stitch (in the shape of the letter P), which is applied with small stitches.
Cover it up discreetly
Bonding damaged tissue has a similar process.
If a hole appears when the fabric is burned, carefully cut off the damaged edge. Lightly grease the material with special fabric glue, carefully fold it inward and glue it together. In most cases, it is recommended to leave the product for several hours to wait until the glue has completely dried.
Many needlewomen go a different route. If damage or scorching appears on the shelves, pockets or sleeves, they are repaired with various applications. Any drawing is suitable for this, depending on personal preferences or hobbies. The application is best used with a special adhesive layer m. This process is characterized by simple steps and a minimum amount of time.
Making a patch
In most products, manufacturers include an additional piece of fabric with the down jacket. It is intended to test the product before washing or is used as a patch. If there is no spare material, the situation is somewhat more complicated. You can find a scrap that is as close as possible to color scheme and structure to the color of the down jacket. If this was not possible, if both sides of the down jacket match, you can carefully cut off a small piece from the inside of the product (for example, the lining).
Reference! Additional scraps can be found at specialty craft stores. For greater convenience, you should buy fabric with an adhesive base.
The best option would be to glue a patch. To do this, carefully process the uneven edges and cut out a small piece from the scrap that is identical to the damage. Lubricate the underside of the patch with glue and carefully press it onto the torn part. For a more reliable fixation, you can place a heavy object on top and leave it for several hours.
With a few simple steps, the patch is ready.
- When gluing a patch, it is better to use tweezers for more comfortable work.
- It is necessary to use only transparent and waterproof glue suitable for working with fabric materials.
- When correcting a patch with uneven edges, it is recommended to first trim the edges to make them smooth.
- When using stickers and appliqués, you must first sew up the scorch mark. This will help prevent the fabric from unraveling in the future.
- To lay a zigzag seam, you can use sewing machine.
- It is recommended to select applications and stickers in accordance with the style of the product. For a classic down jacket - flowers or bright designs, for sports models - badges or symbols of popular youth brands.
Conclusion
Every person regularly experiences damage to their clothing. Particularly disappointing are holes and cuts in winter clothing such as a down jacket. Using a few simple skills and applying our useful tips, you can correct most holes yourself at home.
Sometimes unpleasant situations happen when outerwear becomes damaged so that holes form on the surface. It’s good if the defect is formed along the seam, but holes sometimes appear in the most inappropriate places - for example, on the back of a Bologna down jacket or on a sleeve. Such options can be fixed with a patch or mended, but there are other ways to eliminate troubles.
Types of holes on a jacket
Winter and demi-season clothing, unlike a shirt or trousers, has upper layer, which is most often damaged, and an insulating lining with filler. The resulting defects on the product can be of the following types:
- A cut. This could be a knife blade, glass or any other sharp object.
- Burnout. It is formed due to thermal or chemical effects on polyester, melting it.
- Hook. Formed when interacting with objects, leaving a torn area.
If the damage is located in a less noticeable place - for example, a pocket, armpit, side seam or bottom of the product, then it is better to sew up or seal such holes. If an unpleasant hole is located in a visible place, it should be disguised using patches or stripes.
Making patches
To eliminate a defect in a product, you can mend the damaged area, glue it, or use a decorative patch. To understand how to repair a hole in a down jacket, you need to know the composition of bolonium for gluing. Before starting the process you should carefully examine the jacket labels, which describes the effects of temperature and agents when processing fabric.
Darning is not always appropriate for jackets with a feather or down base, since the outer material is very thin, and due to the impregnations it has a certain density. Closing a hole in this way can lead to the formation of a sloppy seam.
To make patches, it is advisable to choose a material identical to the composition and color scheme of bologna in order to avoid melting and deformation of the fabric. The patch for the hole is cut out slightly larger than the required size. Its shape can be varied - from the usual squares and stripes to figures in the form of fruits, smiley faces, etc.
Patches and accessories for decorating defects
Eliminating holes in jackets is possible with the help of stripes, but they must be used in those parts of the product where they are appropriate. Using embroidery as a separate element, for example, a company logo or a thematic image, is better on the sleeves, front of the product or in the pocket area.
In this case, the patch pattern should be selected in accordance with the color and size. You can find these in stores emblems with adhesive coating on the reverse side, which is attached to the site of damage using a thermal method. The process takes place using an iron; in addition, you can manually sew the part to the defect site, masking it.
If the cut is long and narrow, decorative or reflective tape is used to hide the defect. Having cut off a piece corresponding to the length, attach it to the damaged part using glue or heat-shrinkable web.
You can decorate the area using metal or plastic fittings, then the repair site will be invisible. Depending on the appropriateness of the use of parts, these may be:
- A row of buttons.
- Making eyelets in place of the hole.
- Installation of buttons or rivets.
- Decorative braid.
The fittings can be installed at home, and necessary details Purchase at your local fabric store. If the installation is difficult, the product can be taken to a specialist for repair.
Repairing damage
Before you seal the down jacket, you need to figure out what is the best way to do it. Properties warm jackets today it is Lightweight, waterproof and cold-proof. But, despite meeting all these qualities, the product does not have sufficient strength and can be easily damaged. The defect can be eliminated by sealing the cut.
To seal the hole with glue, you should use a rubber or caoutchouc compound; it is suitable for fabric. In this case, heat treatment is not necessary; sizing can be done at home, what you need:
- Glue.
- Finished patch.
- Scissors.
If the hole on the bologna jacket has uneven cuts, then they need to be edited with scissors, giving it a shape. The step-by-step sizing process is as follows:
- The reverse side of the jacket, as well as the patch itself, is degreased by applying acetone or solvent using a cotton pad.
- Apply a thin layer with a brush or cotton swab Lubricate the treated surface with glue.
- Apply a patch from the wrong side, closing the tear, pressing with a press, which can be a switched-off household iron.
- The product should lie under pressure for several hours for better adhesion and penetration of the glue into the fibers of the fabric.
- After drying, you can evaluate the front side; if it looks unaesthetic, you can create decoration using a patch or braid.
If the place is inappropriate for embroidery, then the outer patch should be glued using the same principle, taking into account the tone of the material. In this case, for masking you will need 2 identical patches.
How to seal a hole correctly
Elimination of the defect occurs thermally in several ways, using non-woven material or fabric for a patch on a jacket with an adhesive base. Both options are effective and the results are the same.
To eliminate a malfunction thermally, In your arsenal you need to have:
- Cobweb. This tape is produced using a non-woven method and is completely impregnated with glue. When exposed to iron and temperature, it dissolves, tightly gluing the parts.
- Scissors.
- The patch that needs to be cut is slightly larger than the area where it will be sealed.
The repair process is effective for cuts or snags, is as follows:
If a hole has formed in the burned area, and it is impossible to combine the damaged sections. In this case, when making repairs, it is better to use 2 patches, one of which, together with the adhesive base, is inserted into the hole, and the other is placed on top and secured with an iron.
Sewing a jacket at the seam
If the product comes apart at the seam, how to sew it up correctly - the repair procedure can be carried out manually or machine. To do this, you will need threads to match the color of the fabric, a needle or a sewing machine. If the jacket is unlined, turn it inside out and stitch along the seam. if there is lining fabric, in one of the places on the inside it is necessary to rip the seam and work your way through it to the place of the flaw, forming a hidden seam. After which the inside of the product is put in order.
With the manual method, for a strong connection, a thread is inserted in two folds into a needle. They lay a seam, making a stitch and going back, or quilt the area of the defect with a “goat”. If possible, it is better to check all the seams on the Bolognese jacket and, if there is the slightest visible break in the stitching on the wrong side, sew up the product, reinforcing the seam. Otherwise, in the near future the down jacket may tear in another place and the procedure will have to be repeated.
Sewing a hole with a blind stitch
The hidden seam is placed on the wrong side of the jacket. The method is good for dense fabrics used for the top of the product. There are several options for how to sew with a hidden seam; the jacket is turned inside out and the hole is mended. Or they carry out the procedure by carefully fastening the sections along the face of the product with an invisible seam, simulating a thread surface.
The hidden seam does not always look harmonious; damage may occur. different shapes and size. For example, if you burn through the fabric, you can repair the down jacket if you have a patch without gluing.
Creative approach to renovation
When eliminating a hole from any damage, you should use your imagination. It all depends on the location of the flaw. For example, if a tear in the material occurs in the chest area, you can use decorative stripes. And if there are pockets with zippers, disguise the cut with a short zipper.
When creating holes at the elbows of things, it is important to maintain symmetry and put the patch on the other sleeve. If the fabric is damaged on the back of the yoke, you can put a large patch the size of the part; in this case, gluing is not necessary, just carefully cut the fabric to size and sew it manually with a blind seam to the product. Or use sewing machine and sew lines across the face.
For children's products, an option on how to sew up a jacket would be to make patches in the form of cars, hearts, flowers or geometric shapes. Or collect knitted braid in the form of a bow, a flower, and with this voluminous composition cover the area of the flaw.
Attention, TODAY only!
If suddenly your favorite jacket, which you recently bought, is torn in the most visible place, you think: what to do? Is it still possible to save her? How can you sew it up yourself without taking it to a workshop? And the main thing is that the seam is invisible to prying eyes. The situation, of course, is not a pleasant one, but it is also not the most terrible and completely solvable. You can repair your jacket if you choose the right repair method.
If the jacket is torn at the seam
This is probably the simplest case - sewing a jacket along the seams. First you need to choose the appropriate threads. If there is a lining, spread it along the seam so that it is easier to reach the area where the fabric is damaged. And then you can use either a sewing machine or sew it up by hand. Sew as carefully as possible so that your seam differs less from the factory one. To make the seam stronger, make it longer than the length of the hole: start sewing a little further from the beginning of the hole and end a couple of centimeters after it. Well, don’t forget to sew up the lining later.
By the way, it is not necessary to rip the lining. You can sew the jacket with a hidden seam. To do this, you need to insert the needle from the inside of the fabric so that the knot on the thread is not visible. Then, from the front side, sew parallel stitches, making the same distance between them. Having made the stitch, all that remains is to fasten the thread and carefully hide it inside.
If the jacket is Bolognese
The jacket made of Bolognese fabric is very comfortable, light, but alas, not particularly durable. And if there is such a problem as how to seal a hole, you will need the following:
- tube of Supermoment glue;
- patch fabric;
- a bottle of acetone.
Find a piece of fabric from which you will make a patch. On the reverse side, degrease the tear area with acetone. Apply a thin layer of glue to the prepared patch. And lastly, very carefully connect the edges of the hole and apply a patch.
After this, following the instructions, place the patch under a heavy press for several minutes until the glue hardens.
If you are unhappy with the result of the work done and the hole could not be sealed so as to make it invisible, buy an applique in the store and disguise the problem area.
And also - polyethylene or non-woven fabric
The piece of polyethylene should be smaller than the patch. Connect the torn edges neatly and evenly. Then, from the wrong side, first put polyethylene on the tear site, and then a patch on it. Heat the iron and iron it, using molten polyethylene to glue the patch.
By the same principle, instead of polyethylene, use non-woven fabric, which you can buy in a store along with adhesive web tape. To avoid ruining your bolognese jacket, iron it with a hot iron, placing it under a thin cotton cloth.
By the way, instead of non-woven fabric, the same fabric from which your jacket is made is quite suitable. You can use Moment glue to glue such a patch from the inside out, and do not forget to carefully straighten the edges of the tear.
The easiest way to repair a polyester product using these methods. If the jacket is made of drape or cloth, it is unlikely that the hole in it will be able to be sealed.
How to “hide” a hole under a zipper
Sometimes, if there is a cut on the jacket in a place where a zipper would be quite appropriate, take advantage of this. Let's say this is the top or bottom of the jacket on the right. Then, for symmetry, you could insert a zipper on the left side as well. In some cases, this option not only saves the item, but also gives it a kind of originality - a torn jacket will look different, like a new one.
Instead of a zipper, you can use decorative buttons or rivets.
To do this, you can take a piece of spare fabric, which is usually sold with the jacket. Cover the cut with this fabric, punch it with buttons or rivets, and here you have a decorative element!
Ribbon and braid - to help you
Reflective tape, sewn to the defect site or across the entire width of the jacket, will not only be effective, but also useful - it will be visible at night, and you can feel safer on the road.
Tape will also help you disguise the seam on your jacket. You can sew it on in different ways, as your imagination dictates. Color and length are optional. Don’t be afraid to experiment - a well-chosen braid will not only help close the seam, but will also make your jacket stylish and original.
In general, if you tear your jacket, do not rush to throw it away. There are many ways to “give it a second life,” so it’s worth a try. You'll see - you will succeed!
You need to choose a repair method based on the degree of damage. In addition, the location of the damage also plays an important role; for example, the simplest method in the form of decorative patches is unlikely to work if the cut is on the side of the jacket.
How to sew up a hole in a jacket using decorative patches or iron-on adhesives.
A variety of themed patches, which can be easily found in many sewing stores, will help you disguise a hole on a jacket of any style and design as delicately as possible:- For a sports down jacket, labels with a logo or emblems of an automobile or football theme are ideal. This also applies to children's down jackets, which can be revived without any problems using a variety of applications and pictures depicting your favorite ones. fairy tale characters;
- If the selected patch does not look very appropriate, then you can symmetrically sew exactly the same products on the undamaged area;
- Square, round or triangular patches cut from leather, denim or other fabric will look very stylish and harmonious on a jacket of any style;
- Another simple and affordable solution that will help hide a torn area of a jacket is thermal stickers. To apply them you only need a piece of cloth and an ordinary iron.
How to sew up a hole in a jacket in the form of a large cut?
Such a cut can occur if you ran your jacket over some sharp object or for some reason the material became too stretched and burst. In this case, non-woven tape with an adhesive thermal base will come to the rescue (with the help of such tapes trousers are rolled up). Place a ribbon of the required length under the cut, carefully connect the edges without overlapping and iron through the fabric.
For sports jackets, cuts and holes can be sewn up using reflective tape. You need to sew it not only on the torn place, but, for example, in a circle (along the width) of the entire jacket or sleeve. Moreover, thanks to such an element it will be possible not only to delicately disguise damaged fabric, but also to protect yourself from various vehicles in the dark.
If a hole is formed due to a cut, then a short zipper will help to hide it very delicately. This option will not only get rid of the problem of holes in the jacket, but will also help make the item more fashionable and exclusive. The same can be done with all kinds of rivets and buttons, which, according to your own taste, are sewn over the resulting hole.