To turn an ordinary hairstyle into a formal one, just add accessories. Hair hoops, barrettes, and elastic bands change the style and emphasize the chosen clothing style. A well-chosen accessory can make or break an image. Therefore, it is important to carefully select jewelry. If we talk about hairpins, they are on sale a large number of. Especially relevant are elastic bands and hairpins made from satin or grosgrain ribbons.

But finding an accessory that is 100% suitable is quite difficult. All that remains is to make the hairpin yourself. Moreover, inexpensive materials will be needed for its manufacture. And the creative process is interesting and exciting. How to make hairpins from ribbons with your own hands?

DIY ribbon hairpins for beginners

Many girls are afraid to take on making hair jewelry because they are sure of failure. Others think that the process takes a lot of time, plus they will have to buy half the goods in craft stores. In fact, everything is much simpler. At the initial stage you will need 2-3 shades of ribbon and beads. From available materials, prepare scissors, thread with a needle, and a candle.

Options for DIY ribbon hairpins for beginners:

Hairpin in the shape of a poppy. Take a wide satin ribbon of bright red color. Then cut it into squares of different sizes. These will be the petals of the flower. The number of preparations depends on how lush the poppy seeds you plan to make. Next, you burn each petal with a candle on all sides. This action is performed for two reasons: the tape is prevented from unraveling, and the workpieces are given an uneven shape, similar to a petal. Next, take the blanks and place them on top of each other. Your task is to fold the petals so that they look like a flower. Next, sew the blanks in the center using a needle. To disguise the middle, take black beads and sew them into the center of the poppy. Left with reverse side glue the automatic mechanism or “clothespin”.
Creating a second hairpin will require even less effort. Take the ribbon and cut a piece 15–20 cm long. The splendor and size of the flower depend on this indicator. Adjust the length yourself. Next, fold the material in half along the long side. Take a needle and thread and start stitching the braid, forming frequent folds. The result will be a blank similar to a caterpillar. If you want to strengthen the folds, tighten the thread. Then secure the position and place the last stitch. Treat the edges of the braid with fire. Next, take one end of the workpiece. This will be the center of the flower. Now twist the prepared ribbon around it. You will get a circle that looks like a flower due to the folds. Secure the position of the hairpin by attaching a circle of felt to the back. Glue a “crab” or an automatic hairpin mechanism to it. Place a beautiful bead in the middle.

If you don’t have enough time to make a hairpin, then take a satin ribbon and weave it into a braid. Secure your hair with an elastic band. Tie a ribbon on top in the form of a beautiful bow.

Kanzashi hair clips

The Japanese technique of creating hair jewelry has gained particular popularity. Looking at kanzashi hairpins, it seems that it is impossible to imitate needlewomen. The products consist of many elements or one lush flower. To master the kanzashi technique, start by creating petals. Once you've mastered the basics, you can move on to creating a hair clip. To do this you will need to do the following:

Take a satin ribbon and cut it into squares and rectangles. To correctly determine the number of petals, draw a sketch of the future flower on paper.
Then fold the tape diagonally. You will get a triangle. Connect the corners of the workpiece and burn with a lighter. This will secure the part and prevent the petal from coming apart. If you want to make a petal from two flowers, then prepare smaller pieces and place them in the main form.
Combine the blanks into a single composition. If it is a round flower, then cut out the base from cardboard and cover it with tape of the main color. Then glue the petals onto the blank, observing the natural pattern. The first row has the largest petals, the center has the smallest ones. Glue rhinestones and beads into the middle, and lay out the stamen with beads. Experienced needlewomen They use a special socket into which a black bead is placed. At the final stage, attach the mechanism from the old hairpin.

In terms of the technique of making blanks and assembling the overall composition, kanzashi is compared to modular origami. Since this method is used to make hairpins in the shape of flowers, decorated with beads and rhinestones, kanzashi jewelry looks feminine and elegant.

DIY ribbon bows

Beginners will enjoy making these hairpins. Bows add flirtatiousness and romance to the look. To create, you will need leftover ribbons in three shades. To make your own ribbon bows, follow these steps:

Take cardboard and cut out a rectangle. Next, take the main color and wrap the workpiece three times. Polka dot colors are suitable for bows. For the bottom base, use a wide ribbon.
Then remove the cardboard piece and sew the material together in the center. After this, straighten the bows in different directions. Burn the ends with a lighter or candle.
Next, take a narrow ribbon of a different shade and cut out two blanks. Apply them to the bow to adjust the length. The size of the blanks should be smaller than the base of the hairpin.
If necessary, trim the ends and singe the pieces. Next, apply it to the center of the bow and sew the cross onto the cross.
In the last step, take a transparent ribbon and make a bow, as described in the first point. Process the edges of the braid and sew them to the center. The result is an elegant bow consisting of three layers. Fill the middle by gluing a bead.

To attach an elastic band or bobby pin, prepare a base of cardboard covered with tape. Next, glue the mechanism or make a loop for it.

DIY grosgrain ribbon hairpins

Such products adorn the heads of young fashionistas. There are few mothers who want girls. But, caring for them is not easy. The curls get tangled, do not obey, and cannot be styled. Hair accessories are a lifesaver in such a situation. DIY hairpins made from grosgrain ribbons are bright and original.

The work order is as follows:

Cut a piece of grosgrain ribbon. Burn the end to prevent the barrette from unraveling.
Next, glue the tape to the clip. Start fixing the tape from the “tails” of the clip. These are the parts that we click on to open the hairpin. All sides except one are covered with tape. This part will not be visible because it will be hidden behind the hair.
To give the hairpin additional weight and strength, add weight to the decoration. Cut a piece of foam equal in size to the tape. Then stick the blank under the clip part, which will be visible. Place the foam on the inside.
Then prepare three pieces of grosgrain ribbon. Fold the first and second pieces into a circle and glue the ends together. Then press the sides together. It turns out two bows. Tie the third piece in the middle with a knot.
Next, put the details into a composition. Place the bows diagonally. Lay the braid with a knot on top, placing it in the center. This will be the outside of the part. Next, tuck in the ends of the piece and cut off any excess pieces. Glue the blanks and burn all the cuts. The result is two bows, with a knot in the middle.

Next, glue the resulting decoration to the clip. The size of the clip depends on the clip used. Make pairs of hairpins in different colors to provide your daughter with jewelry to match any outfit. Rep ribbons are interesting because they are used to make decorations of various shapes. Kanzashi technique and satin ribbons are used to create flower arrangements. Hairpins in the form of a lollipop, a snowman, a Christmas tree, an elephant are made from rep braid. ladybug. Therefore, such jewelry is popular among little fashionistas.

Try making your own hair clips. Involve your daughter or niece in this process. Handmade jewelry conveys individuality and stands out with its unusual design.

One of the main elements of any image of a young lady is the hairstyle and, of course, hairpins, ribbons, etc. But often many are faced with the problem when it is impossible to find in the store the accessory that fully matches the chosen outfit. Don't despair - there is a way out of this situation: you can make a hair clip yourself!

Hairpins made of satin ribbons: master class

There are many options for making DIY hair clips. But one of the simplest and most beautiful ones is products made from satin ribbons! So, to make such a decoration you will need: a satin ribbon of the main color 5 cm wide, a satin ribbon 2.5 cm wide of another color or the same, but with polka dots, a needle and thread, a small bead of a light shade, a hairpin - automatic, scissors, glue "Moment". Once everything you need is at hand, you can proceed directly to making the hairpin.

• To begin, take a ribbon of the main color and cut it into pieces 7 cm long.
• Then fold each resulting strip and fold it at an angle of 90 degrees so that the distance from the corner to the edge of the strip is the same.
• Now you need to string the resulting petal onto a thread and a needle.
• The same manipulations need to be done with 4 more petals. The result should be the first flower.
• Exactly the same flower must be made from a ribbon of the main color, only its size must be larger.
• Flowers need to be glued onto a pre-prepared base. It’s very simple to make – just cover a cardboard circle with fabric of the same color.
• Next you need to make 1 more type of petals. To do this, take a polka dot ribbon and cut it into strips 5 cm long. From each piece you get 1 petal. Using a ruler and a soldering iron, you need to solder the corner, and if you don’t have a soldering iron at hand, you can simply sew it together with small stitches. After this, the excess fabric must be trimmed, while being careful not to pull the fabric.
• Now the tape should be folded along the wrong side inward. The cut corner should be sharp, and the sharper it is, the smoother the petal itself will be.
• The petal now needs to be straightened and the corners bent towards the center. And fuse the edge with a soldering iron or lighter.
• You need to make 6 such petals. Afterwards they should be sewn into bundles of 3 pieces.
• Once all the elements are ready, you can begin to assemble the hairpin. First, stick a flower of the largest diameter in the middle, and a smaller flower on top of it. Moreover, they should be attached so that the petals of the upper flower are located between the petals of the lower one, and a bead should be glued in the center of the smaller flower. Finally, small sharp petals need to be glued to the sides. That's all - the hair decoration is ready!

Rep ribbon hairpins: popular options

Rep ribbons have an unusual structure, which is why they look impressive. Flowers, bows, etc. are made from them. One of the advantages of this material is that it is very dense and almost does not crumble. And hairpins made from grosgrain ribbons hold their shape well.

How to make a hair clip from grosgrain ribbon?

Option 1. First of all, you need to take everything necessary materials and tools, namely: grosgrain ribbons 10 mm and 22 mm long, they should also differ in color, scissors, lighter, colorless thin fishing line, needle, hairpin - base, glue, trash cup.

Manufacturing:

1. First you need to match the ribbons to each other by color. To do this, you need to randomly design a bow by placing ribbons next to each other. The length of the workpiece depends directly on what kind of bow will be needed - short or longer.
2. After the desired option has been selected, you need to start cutting the wide tape, taking into account a margin of 2 mm. The edges of the workpiece must be burned.
3. Now the ends of the workpiece should be connected using a needle and fishing line.
4. Then you need to fasten the thread in the center and wrap it several times to create a bow - the base.
5. Then you need to take a second ribbon of a different color, 10 mm wide, and wrap it on top of the base. After the required length has been determined with a margin of 2 mm, the rest needs to be cut.
6. Now you need to sew a ribbon to the bow and pull it in the middle.
7. All that remains is to hide all the seams and threads - to do this you need to take a piece of 10 mm plain tape, measure the required length and attach with threads. If desired, you can sew a button or glue a rhinestone to the middle.
8. It's time to prepare the base hairpin itself. It needs to be covered with tape using glue, and a bow should be glued on top. The hairpin is ready!

Option 2. You will need: grosgrain ribbons white, red and blue colors, hair clip, rhinestone, beads, lighter, glue gun, needle, thread, scissors.

Manufacturing:

1. Cut from tape white a strip 4 cm long, red - 3 cm, blue - 2 cm, singe the edges of each strip with a lighter.
2. Now you need to bend a piece of blue ribbon, then red, putting a smaller ribbon into it, then bend the white one and put both previous ones into it.
3. At the point of connection of all the workpieces, you need to grab the edges of all the workpieces with a needle and thread. In the same way, you need to make 8 more petals. Then sew all the petals together at the junction of the petals, and glue a circle cut from ribbon to the center.
4. Glue a hair clip on the back side of the flower with glue, and the flower itself and its middle can be decorated with beads.

Option 3. You will need: grosgrain ribbons different lengths, thread, needle, glue, elastic band or hairpin, bead.

Manufacturing:

1. First you need to decide on the size of the bow and the width of the ribbons themselves. To do this, you can cut a template 10 cm wide from cardboard, and make a slot in the middle of the cardboard. The tape needs to be wound around this template several times, and its ends should point in different directions at the end of winding. The number of turns of the tape will depend on the desired number of loops; the ends must be secured with clothespins.
2. Now the tape should be sewn through the slot in the cardboard, the workpiece should be removed and the thread should be tightened;
3. You need to make more bows from ribbons of a different color and size, and then place them one on top of the other and secure with glue or a needle.
4. The middle of the bow can be decorated with rhinestones or simply wrapped with ribbon. After this, the bow on the back side only needs to be attached to an elastic band or hairpin!

Kanzashi hairpins: exquisite DIY decoration

Kanzashi is a hair decoration common in China and Japan. Nowadays, such decorations are becoming popular among brides and people whose specific activities involve wearing a kimono. In Russia, women love kanzashi as an everyday accessory; they are sold in stores in a large assortment. But you don’t have to buy such a decoration; you can make it yourself at home!

To make such a decoration you will need: ribbon, tweezers, scissors, pins, a candle, a needle and thread or glue, a base for a hairpin, and beads for decoration.

1. You need to cut the required number of squares from the tape. Each of them should be folded in half, and then in half 2 more times.
2. The corner of the tape needs to be cut off and scorched over the candles; of course, you don’t have to do this, but then the angle will turn out to be very high.
3. In the same way, you need to make the required number of petals and connect them together with thread or glue.
4. Now all that remains is to decorate the middle of the flower with rhinestones, buttons or any other decoration, connect it to the base and that’s it - you can decorate the hairstyle of any fashionista!

DIY hair clips: master class

DIY hair clips: photo

Hair clips are a wonderful decoration; they can emphasize the individuality of the chosen image! You don’t have to go shopping to find the right accessory, because you can make it yourself! In addition, you can make it together with your daughter or niece, because this activity is incredibly interesting!

The long-awaited spring has arrived, followed by a long, warm summer, which means it’s time to start making DIY hairpin. Every girl knows that with the help of even a simple hair accessory you can perfectly complement your look, especially when it comes to exclusive jewelry. Today you will find a real kaleidoscope of master classes on making jewelry in several techniques, which you can master and delight yourself and your loved ones with new hairpins, elastic bands, combs.

DIY hair clips

DIY hair clips can be done not only to save money, although this reason is also quite significant. First of all, it is self-production, for example, allows you to maximally select an accessory for clothing by color, texture, model, because searching for the right product in stores can take much more time and effort.

If you think you have to learn, how to make hairpins with your own hands it is very difficult and it is for this reason that you are afraid to even try, then this is wrong. Of course, there is no need to immediately start with complex products, no matter how beautiful they may seem to us, but you can find them in any technique simple circuits And step by step guides, which will allow us to cope already at the initial stage. As a base for most pieces, you will need to use ready-made accessories from inexpensive hairpins, or find something in your collection that you no longer wear and update it. You may need clamping mechanisms, simple bobby pins, undecorated elastic bands, as well as combs and tucks. All this can be decorated very beautifully using simple improvised materials that you probably have in your home.

First DIY hairpin master class and dedicated to the most simple products. To decorate an ordinary pin, you will need a small piece of red felt, as well as any decor that you like. These could be items purchased at a handmade store or gift wrapping, buttons, beads, dried flowers. First, we cut out two identical felt blanks to fit the outer edge of the ovals. Future decor must be glued or sewn onto one of them. Apply the mechanism to the second and mark a place for the cutout under the wide part. The cutout is needed to thread the lock through the fabric. After this, we connect both parts together, gluing the edges with hot glue or sewing with threads; excess fabric can be trimmed with scissors. As a result, in fifteen minutes of work you will receive a new bright accessory for yourself or your daughter.

DIY ribbon hairpins It's not any more difficult to do. You just need to prepare a sufficient number of prepared petals. You can take a wide satin ribbon and cut it into square pieces, which are then turned into circles. To create the jagged shape that is characteristic of flowers, we will use heat on the edges of the candle. Due to the properties of synthetic fabric, it begins to melt under the influence of temperature, the edges are sealed and take on a curled appearance. We need this so that the edges do not fray and the threads do not come out of them. So, we have the prepared petals ready, so as not to fuss with them for too long, we simply stack them on top of each other and sew them with threads as shown in the photo, in five places. In order to disguise the junction and give the hairpin an additional highlight, we decorate the middle with embroidery made of transparent beads. Now that the luxurious (and completely uncomplicated) flower is ready, glue it to the base. In this way, you can make a fairly large collection of all colors and sizes to match any of your summer sundresses.

DIY kanzashi hairpins

A special large group consists of all in Japanese technology kanzashi. She is a close relative of technology modular origami, but the parts that make up the overall craft, the modules, are made not of paper, but of satin fabric. DIY kanzashi hairpins They are almost always made in the shape of flowers, look very feminine and are suitable for any special occasion.

For a festive hairstyle, for example, for a New Year's ball, you can use various accessories decorated using this technique. We have already learned how, and now you can practice making a hairpin with a cascade of flowers. However, if this option seems too complicated to you, you can not do the entire composition, but only its central part; this will be quite enough for the overall image.

Having mastered the most difficult part in creating DIY kanzashi hairpins (video you can find a lesson online) - making identical satin corners, you can create products according to your own sketches, because all the parts are connected to each other like a children's construction set. You can easily combine colors by inserting triangles into each other to create two- and three-color petals. Such as in the example presented are additionally decorated with pearl beads, which makes them look much more elegant.

DIY elastic band clips

However, you can work with satin at a less professional level, if you take bows rather than floral motifs as a basis. To learn to do DIY rubber bands, similar to the example given below, you only need to be able to tie bows beautifully, and find three pieces of different material that match each other in color.

At the first stage, we tie the ribbon into a bow. But we will do this using a cardboard rectangle so that the bow is even on all sides. We make three full turns of satin ribbon around the rectangle, carefully remove the cardboard, and in the middle of the turns we sew the fabric with thread, straightening the ends in different directions. Using the same technique, we need to make another bow, but from a thinner braid. Between these layers you need to make another one, but if it is also a bow, the elastic will turn out to be too voluminous, so we just put the pink ribbon crosswise and sew it on. Don’t forget to treat all the tapes that are part of the craft with a lighter to seal their cuts.

If you know which fingers to hold the hook with and are familiar with the designation of the basic loops, then you can master the next rainbow elastic band. It is called rainbow because it consists of seven parts, each of which is made in one of the colors of the rainbow. However, you can, in your own version, both reduce the number of layers and change their shades. The knitting pattern shown above is the same for each part; the same hook size and thread of the same texture are used.

And these are so red DIY flower hair clips can make an excellent set with scarlet felt pins, which we have already made above. For them you will need fabric of any texture, from which we cut out circles, five pieces of the same size. You need to fold each of them in half and sew it with a basting stitch along the edge, then pull the thread, gathering the fabric. On the same thread you sew the second petal and also gather it together. And you repeat this until all five petals are on the thread, after which you can close the flower and fix the thread. To close the hole in the middle, sew a button of a contrasting color onto it, and attach the entire structure to a pre-purchased red elastic band.

How to make a hairpin with your own hands

Among all the master classes dedicated to how to make a hairpin with your own hands, there are many that are based on interesting techniques and materials. Luxurious hair decorations are obtained when basic elements are decorated using cold porcelain. This type of modeling allows you to create real masterpieces in miniature.

In this example, you can see a craft that is created from thin copper wire and pieces of molded material. In order for such a craft to last longer, you need to choose a high-quality composition that does not require artificial drying or complex processing. To complement the decoration, it is often equipped with elements of fabric, rhinestones and semi-precious stones, glass.

If such beauty is created with the help of modeling, then those who know how to handle beads should even practice making unusual hair clips. In this case, the product is crafted in several stages. The first of them involves the actual process of embroidery, which you can develop according to your own sketches. Even the finished element must be strengthened, and we will use thick paper as such a reinforcing layer. The third, final layer should be some very dense and durable material, ideally it could be a piece of dark suede or leather. All three layers are glued together, leaving intact the structural holes necessary for the mounting stick. As it, you can use a small decorative sushi stick coated with enamel or varnish.

Using not embroidery, but classic beading, you can make volumetric flower, which will keep its shape well due to the presence of a wire frame. Good to use for similar DIY hairpin video lessons so you can see how the elements fit together.

DIY hairpins photo

And a couple more manufacturing examples beautiful hairpins with your own hands, photos of which are presented below. This is another example of modeling, only in this case it will be decorated with an elegant hair comb, which is perfect as a formal accessory.

And the last example is lush roses, which are made from unusual material, which is called foamiran. This is a synthetic material based on ethylene, which has excellent “craft” characteristics - it is very easy to work with, it is durable, strong, and safe.

The main element of the hairpin is very similar to paper, but it is made of foamiran. To give the desired shape, its edges need to be heated using the sole of an iron and a wooden skewer (so as not to burn your hands). Adding color to foamiran is also easy - you need to clean the lead and rub it into the surface of the petals with your fingers.

The final stage of creating the image of a young fashionista is the hairstyle, including decorating the hair with a hairpin. However, very often we are faced with the fact that nothing offered in the store is combined with the unique and inimitable image in which we would like to appear today. The way out of this situation is simple - you can make a hairpin with your own hands. Of course, it will take some time, but the result is worth it!

How to make a hairpin from ribbons?

There are many options for creating a hairpin with your own hands - you can make a decoration from beads, from valuable stones, from fabric, from scraps of leather, but you never know what you can make! The imagination of young fashionistas has no limits. We will offer you a simple and economical way - we will make a hairpin from ribbons.

To make a hairpin from ribbons with your own hands, we will need the following materials:

• satin ribbon 5 centimeters wide, brown;
• satin ribbon 2.5 centimeters wide, brown with polka dots;
• threads with a needle of light colors;
• bead, preferably small white;
• automatic hairpin;
• glue moment;
• scissors.

Ribbon hairpins: master class

So, having prepared everything you need, let's get to work:

1. Take a brown polka dot ribbon and cut it into strips 7 centimeters long.

2. Then fold the piece of tape at an angle of 90 degrees so that the distance from the edge of the tape to the corner is equal.

3. This is what the ribbon looks like folded from the back.

4. Now we string the resulting petal onto a needle and thread.

5. In the same way, we string four more petals, carefully and evenly pulling them together. As a result, we get the first flower.

6. Let's make exactly the same flower from a brown ribbon of greater width.

7. Glue the flowers onto the pre-made base. The base is made simply by covering a circle of cardboard with a piece of fabric of the same color from which the flower is made.

8. Now let's make the second type of petals. For a visual example, we used a white ribbon; for the master class, the petals are made from brown polka dot ribbon. Cut the tape into pieces 5 centimeters long. One piece makes one petal.

9. Using a soldering iron and a ruler, solder the corner; if it is not possible to work with a soldering iron, you can sew the corner with a small seam, then trim off the excess fabric, but this should be done very carefully, without pulling the fabric. We fold the tape lengthwise with the wrong side inward. The cut corner turned out very sharp. Let's take note that the sharper the corner, the smoother the petal turns out. In the master class we got an angle of almost 30 degrees.

10. Straighten the petal, bend the corners towards the center. Melt the edge with a lighter or soldering iron.

11. Let's make six petals of this design.

12. Then we sew the resulting petals together in three pieces, stringing them on a needle and thread.

13. Now that all the elements of the fabric hairpin are ready, let’s begin assembling the decoration. First of all, we glue the flowers - first a large brown one strictly in the middle of the automatic hairpin, then we glue a smaller polka-dot flower onto it. We glue it in such a way that the tops of the petals of the smaller flower are located between the petals of the larger one, and glue a bead in its center. Then we glue small sharp petals on the sides.

14. The hairpin is ready!

A beautiful hairstyle is important for the fair sex at any age. Accessories play a big role in creating an elegant look. A young princess will definitely have a lot of hairpins and elastic bands hidden in her piggy bank that will help highlight the beauty of her hair.

Modern manufacturers offer a wide range. The disadvantage of such products is the inflated price and not always acceptable quality. Using a few skills, you can make hair clips from satin ribbons. Such accessories will be particularly original and fully meet the requirements of the hostess.

The technique for making such products does not have a high level of complexity. The big advantage is the creation of unique accessories. Among the variety of options presented, it is easy to choose the most suitable one for the job.

The initial stage is preparation for the needlework process.

Materials and tools:

• satin ribbons;
• scissors;
• pencil;
• compass;
• felt;
• hairpins;
• threads;
• needle;
• glue;
• sewing machine;
• beads or rhinestones for decoration.

Addition: When decorating, bright buttons instead of colored beads are also suitable.

Option 1: We mark circles (5-7 pieces) of the same diameter on the material using a compass. Carefully cut out according to the outline. We fold each circle in half twice. We carefully fold the lower wide edge like an accordion and hem it. Gradually sew on each petal. The flower is almost ready. On the wrong side we glue a small circle cut out of felt. It will serve as the basis. Place a bead in the center of the front side. It can be secured with glue or thread. Carefully glue the felt base to the hairpin. The original accessory is ready.

Reference: To make the process more comfortable, it is recommended to use cardboard circle blanks.

Option 2: E This method is more complex compared to the method described above. To work, we cut out several strips of the material of the same length, but different widths. Fold each element in half. The width of the strip on one side is folded into a careless accordion and stitched on a sewing machine. We process the remaining parts in the same way. Cut out a small circle from felt for the base. Carefully glue the petals to the base, overlapping each other, so that the flower turns out to be multi-layered. Place a stone in the middle. This accessory will imitate a real rose.

Option 3: This method of creation is easier and does not require work with sewing machine. Cut out 4 strips of the same size from the tape. We place the ends of the workpiece in the center and sew them on. We work with the rest of the patterns in a similar way. We carefully sew the two resulting blanks together in the center. It turns out to be a small bow. Cover the attachment point with a small piece of fabric. You can place a bright bead or small brooch in the center. The difference between these bows is their size, which is easy to adjust yourself. The final result depends on the length of the workpieces. When decorating one hairpin, you can use several small bows at once.

Advice: The bow can also be made more voluminous by using several blanks when sewing. For example, an additional tape is placed horizontally, between the main edges. For greater brightness, it is recommended to make this strip in a different shade.

Ideas for New Year's kanzashi hairpins made of satin ribbons

The technology of kanzashi needlework migrated to us from the inhabitants of Japan and China. This type of art is very popular among girls in these countries. Flowers are used as additional decor for festive outfits or ceremonial decoration of the room. The techniques seem very complicated at first glance, but they are very beautiful and different. However, making original flowers is quite easy.

Materials and tools:

• satin fabric in several shades;
• pencil;
• ruler;
• scissors;
• felt;
• glue;
• barrette;
• lighter;
• beads or rhinestones for decoration.

We cut strips of different lengths from the fabric. Blanks of a certain shade must have the same parameters. From each part we form a droplet. We fold the ends on top of each other. Observing safety precautions, lightly burn it with a lighter. This is necessary so that the ends are secured to each other.

Attention: for more comfortable work, the ends can be secured with an invisible thread and only then cauterized. This action will help avoid possible burns.

We arrange the rest of the details in the same way. The petal is ready. When making the remaining parts of the flower, we use a similar method. The main elements of the flower are ready.

We cut out a small base in the form of a circle from felt. Carefully glue the petals around the circumference at a distance of about a centimeter from each other. the second layer should be moved slightly. Then the flower will turn out more lush and voluminous. In this way we glue three rows.

Let's move on to preparing the base for the stone. To do this, cut out small identical squares from a brightly colored ribbon.(for example, lemon or pink). We fold each element diagonally to form a rectangle. We fold the side ends towards each other and burn them with a lighter. It turns out to be a kind of boat.

Reference: When forming a boat, a small piece of excess fabric may form at the bottom. We get rid of it using scissors.

We glue the petals in a tight row to a small fabric circle, which acts as a base. Place a large stone or brooch in the center. The decoration can be attached using glue or thread. We glue the resulting flower in the center of the main pre-prepared product.

The finished accessory, designed using kanzashi technology, can be left as is or further decorated. For example, pieces of brocade can imitate grass and decorate a flower. To do this, cut out several short pieces of material. We carefully disassemble each element fiber by fiber, without reaching the base. Glue it to the center of the main flower, carefully distribute the fibers throughout the flower. We glue the element with the stone on top.

Advice: To prevent the brocade from falling apart, the base should be scorched with fire.

To decorate the bottom layer, brightly colored petals are suitable. In addition to decoration, they will help hide the base made of felt. We cut out diamonds of the same size from satin material. We place the figures on the wrong side. Make sure that the ends meet exactly in the center and are evenly spaced over the entire area of ​​the flower. We carefully glue all components. At the end, we attach the finished flower to a pre-prepared hairpin.

Conclusion

Hair accessories complement and decorate any outfit. Products made by hand are especially attractive. Using a few tricks, you can create several original hairpins from satin ribbons. They will be distinguished by originality and individuality, and will fully meet the personal requirements and expectations of the young princess.