Dimensions

56/62 (68/74) 80/86

You will need

Yarn (100% extra fine merino wool; 220 m/50 g) – 150 (200) 250 g light gray; 64 small light gray buttons (4 for the blouse and 2 for the booties); soft elastic band 1 cm wide to fit the waist (for panties); knitting needles No. 3; short circular knitting needles No. 3; stocking needles No. 3; 1 auxiliary needle.

Patterns

Garter stitch

Knit front and back rows;
in circular rows: alternately 1 circle.r. – facial loops, 1 circle.r. - purl loops.

Facial surface

Front rows - front loops, purl rows - purl loops;
in a circle.r. Knit all stitches.

Purl stitch

Front rows - purl loops, purl rows - front loops;
in a circle.r. Purl all stitches.

Rubber

Alternately 1 stitch in stockinette stitch, 1 stitch in purl stitch.

Raised pattern on 2 loops

1st r. (= knit): * 1 knit, 1 purl, from * constantly repeat, finish with 1 knit;

2nd row: knit all loops according to the pattern;

3rd row: purl all stitches;

4th row: * 1 purl, 1 knit, from * constantly repeat, finish with 1 purl;

5th row: knit all loops according to the pattern;

6th row: knit all stitches.

Braid pattern on 8 loops

Rows 1–4: 1 stitch in purl stitch, 6 stitches in stockinette stitch, 1 stitch in purl stitch;

5th row: 1 st in purl stitch, leave 3 sts on the auxiliary needle before work, knit 3, then knit the stitches from the auxiliary needle;

6th row: knit all loops according to the pattern.

1–6th r. repeat constantly.

Button hole

Cast off 1 stitch and cast on again in the next row.

Knitting density

25 p. x 40 r. = 10 x 10 cm, knitted with a relief pattern;
26.5 p. x 39 r. = 10 x 10 cm, knitted in stockinette stitch.

Pattern


Completing of the work

Sweater

Back and shelf

Knitting in one piece.

Cast on 111 (131) 151 stitches and knit between the edge relief pattern.

After 10.5 (13.5) 16.5 cm from the initial row, above the 4th loop from the right edge, make 1 button hole and then above it with an interval of 3 (3.5) 4 cm, make 2 more holes, as described above.

At the same time, after 13 (16) 19 cm from the initial row in the last purl row, evenly distributed, add 7 (8) 9 p. = 118 (139) 160 p.

Then distribute the loops as follows: first 31 (36) 41 sts = right front, next 56 (67) 78 sts = back, next 31 (36) 41 sts = left front.

Finish all parts separately.

On the back stitches, continue knitting between the edge stockinette stitch.

After 7.5 (9) 10.5 cm from changing patterns, close all loops straight.

On the loops of the right front, continue to knit between the edge stitches as follows: 6 stitches in a relief pattern (= front panel), knit the remaining loops in stockinette stitch.

Don't forget to make the remaining button holes.

After 5.5 (7) 8.5 cm from changing patterns, leave the first 7 stitches (= strap loops) for the neckline on the right edge and close the next 4 (5) 6 stitches, then in every 2nd r. close off 1 x 4 p., 1 x 3 p. and 1 x 2 p.

At the same height as on the back, bind off the remaining shoulder loops straight.

Left shelf

Finish symmetrically to the right shelf, but without button holes.

Sleeves

Cast on 35 (39) 45 stitches on the knitting needles for each sleeve and knit 1.5 cm = 6 r for the placket. relief pattern, while in last row, evenly distributed, add 1 (3) 2 p. = 36 (42) 47 p.

Continue knitting between the edges in stockinette stitch, while for the sleeve bevels add on both sides every 12th r. 3 (4) 5 x 1 p.

After 12 (15) 18 cm from the bar, close all the loops directly.

Assembly

Lightly moisten the parts, pin them onto the pattern and leave until dry.

Sew shoulder seams. Sew the sleeve seams. Sew in the sleeves so that the middle of the sleeve coincides with the shoulder seam.

Transfer the remaining loops of the strap to circular knitting needles and between them along the edge of the neckline, cast on 53 (59) 65 sts = 67 (73) 79 sts. Knit 1 purl row, then 6 r. with an elastic band, at the same time in the 4th p. above the 4th loop from the right edge, make 1 more button hole. Close all loops.

Sew buttons.

Panties

Right pant leg

Cast on 43 (49) 55 stitches and knit 1 purl. row of facial ones. Then knit 3 rows for the placket. = 1 cm with a relief pattern, while adding 1 stitch in the last row.

After 12 (15) 18 cm from the bar, leave all the loops.

Left pant leg

Knit in the same way as the right leg.

Top part

Transfer the right and left trouser legs to circular knitting needles and between them cast on an additional 2 x 8 sts for the step = 116 (132) 148 sts.

Continue knitting in circular rows with stockinette stitch, while decreasing for wedges (2 x 8 step stitches each) as follows: slip the loop before the 1st step loop, knit the 1st step loop and pull the removed loop through it; Knit the last step loop together with the next knit stitch. Repeat these decreases in every 2nd circle. 3 more times so that all step loops are decreased again.

Then reduce for side bevels on both sides in every 7 (9) 11th circle. 2 x 1 p.

After 10 (12) 14 cm from the beginning of the step, continue knitting in short rows in forward and reverse directions.

To do this, leave 48 (56) 64 sts of the front part and continue to knit 48 (56) 64 sts of the back part with the front stitch, while on both sides in every 2nd r. leave 3 x 4 (5) 6 stitches and always turn the rows using 1 yarn over.

After 12 (14) 16 cm from the beginning of the step, continue knitting on all loops of the front and back parts in circular rows with an elastic band, while in the 1st circle. Yarn overs should be knitted according to the pattern together with the previous or subsequent knit stitch to avoid the formation of holes.

At an elastic band height of 2 cm, knit 1 circle. purl and for the strap once again knit 2 cm with an elastic band. Close all loops.

Assembly

Sew the crotch and inner seams of the trousers.

Turn the placket along the waist line half the width to the wrong side and sew, leaving a small area open. Thread elastic band.

When finished, lightly steam all seams.

cap

On stocking needles, cast on 80 (90) 100 loops, distribute the loops onto 4 knitting needles and knit in circular rows of 6 cm with an elastic band. Next, knit in circular rows using stockinette stitch.

After 8.5 (9.5) 10.5 cm from the elastic band, make decreases as follows:

1st round: every 14–16th stitch (16–18th stitch) 18–20th stitch (= evenly distributing 5 x 3 stitches) purl together. These purl loops in all circular rows are constantly knitted purlwise.

Repeat these decreases in every 2nd circle. another 6 (7) 8 times, while subsequent decreases are constantly performed over the decreases of the 1st round, in this case the number of loops between decreases will be reduced by 2 stitches each time.

Purl stitches in circular rows in which no decreases are made must always be purled.

Tighten the remaining 10 stitches tightly with a working thread.

Turn the plank halfway to the front side.

Booties

Start working from the heel and knit in the transverse direction. To do this, cast on 24 (26) 28 loops on the knitting needles for each bootie and knit 1 purl. purl row. Then, including the edges, knit as follows: 10 (11) 12 stitches in garter stitch, 1 stitch in stockinette stitch, 2 stitches in garter stitch (= sole), 1 stitch in stockinette stitch, 10 (11) 12 stitches in garter stitch .

In every 2nd r. add sole loops on both sides from broach 4 (5) 6 x 1 knit crossed = 32 (36) 40 p. Due to this, the number of sole loops will increase to 10 (12) 14 p.

After 5.5 (7) 8.5 cm from the initial row, evenly distribute the stitches onto 4 knitting needles = 8 (9) 10 sts on each knitting needle and continue knitting in circular rows.

After 10 further laps. rows, decrease stitches as follows: to lift 2 stitches, knit together, 8 (9) 10 stitches in garter stitch, for the sole, 1st stitch, knitted in stockinette stitch, knit together with the next stitch, 8 (10) 12 stitches garter stitch, knit the next stitch together with the 2nd stitch, knitted in stockinette stitch, slanting to the left (= slip 1 stitch, knit 1 and slipped stitch through it), 8 (9) 10 stitches in garter stitch, then for lifting 2 p. knit together. = 28 (32) 36 p.

Repeat these decreases every 2nd r. until 8 stitches remain, while the number of loops between decreases in each circle in which decreases are made is reduced by 1 stitch.

Tighten the remaining 8 stitches tightly with a working thread.

Assembly

Sew the heel stitch. For the cuff of the left bootie, cast on 16 stitches on the needles and distribute them as follows: chrome. (knit constantly in garter stitch), 8 sts in the “braid” pattern, 6 sts in stockinette stitch, edge.

After 14 (17) 20 cm from the initial row, make 1 hole for a button - close the middle 2 stitches of the “braid” and cast on again in the next row.

After 15 (18) 21 cm from the initial row, close all loops.

The edge of the cuff, knitted with stockinette stitch, starting from the outside of the bootie, is sewn to the upper edge of the left bootie. In this case, the wrong side of the cuff faces the front side and overlaps the other side by 2 cm.

Turn the edge with the “oblique” to the front side.

The cuff of the right bootie is knitted and sewn symmetrically to the left one. Sew the narrow sides of the cuff.

Sew buttons.

Photo: Sabrina magazine. Baby" №3/2015

Children's knitted set: jacket, pants and hat. The set is made by knitting and crocheting. Universal items can be combined well with other things and will complement your baby's wardrobe. Pleasant to the touch, warm and comfortable, they will be a godsend during the cool period. Any color scheme can be chosen, the main thing is to pay attention to the composition of the yarn. Choose baby yarn made from natural fibers.

DIMENSIONS: 56-62 (68-74) 80-86

You will need:

  • yarn (100% sheep wool: 175 m/50 g) - 100 (100) 150 g white:
  • short circular knitting needles No. 2.5 and 3;
  • stocking needles No. 2.5 and 3.

Children's knitted set: jacket, pants and hat knitting description:

BASIC PATTERNS

Knit all stitches.

Purl all stitches.

Garter stitch: knit front and back rows.

Rubber: alternately 2 stitches in stockinette stitch. 2 stitches in purl stitch. Knitting density: garter stitch with knitting needles No. 3 - 24 sts x 48 r. = 10 x 10 cm.

Pants:

The pants are knitted in circular rows from top to bottom.

FRONT AND REAR PARTS:

On knitting needles No. 2.5, cast on 112 (136) 144 sts and knit in circular rows with an elastic band of 2 (3) 3 cm. Then knit in shortened rows. To do this, at the beginning of the circular row (= middle of the back piece), knit 6 (8) 10 stitches, turn the work, knit 12 (16) 20 stitches, turn the work.

Next, knit with an elastic band, while in every 2nd row, turning the work, add 6 (8) 10 stitches on both sides and turn the rows with 1 crochet. After 5 (6) 6 cm from the starting row (measured at the beginning of the circular row), knit all the loops again with an elastic band, while in the 1st round. Yarn overs are knitted according to the pattern together with the previous or subsequent loop. to prevent holes from forming. After 7 (8) 8 cm from the starting row (measured in the middle of the front part), switch to needles No. 3 and knit in garter stitch, in the 1st round. row evenly decrease 16 (20) 20 sts = 96 (116) 124 sts. and attach stitch markers in the middle of the back (= beginning of the circular row) and front parts of the panties. In every 4th circle, row on both sides of the markers, add 5 x 1 p. = 116 (136) 144 p. After 11 (11) 13 cm from the bar, divide the work to complete the legs and finish both parts separately. On the first 58 (68) 72 loops, begin to work the right trouser leg, set aside the remaining loops.

RIGHT PANT LEG:

Knit in circular rows in garter stitch on 58 (68) 72 stitches, marking the beginning of the circular row (= inside leg). 12 (12) 14 cm from the bar in every 4 (5) 6th circle. R. on both sides of the mark, subtract 10 (12) 12 x 1 p. = 38 (44) 48 p. After 21 (24) 28 cm from the bar, use knitting needles No. 2.5 to knit 1 circle, knit row, while adding 10 (8) evenly 8 p. Knit 5 (6) 6 cm with an elastic band, then close all loops.

LEFT PANT LEG:

Knit symmetrically to the right.

ASSEMBLY:

Lightly moisten the pants, stretch according to the sizes indicated on the pattern and let dry. Make a step seam.

DIMENSIONS: 56-62 (68-74) 80-86

Different data for large sizes are given in brackets and. respectively. outside the brackets.

You will need:

  • yarn (100% sheep wool: 175 m/50 g) - 200 g light beige:
  • knitting needles No. 3;
  • double needles No. 2.5 and 3:
  • hook number 3
  • 3 mother-of-pearl buttons.

BASIC PATTERNS

Facial surface: front rows - front loops, purl rows - purl loops.

Stockinette stitch in circular rows: Knit all stitches.

Purl stitch: front rows - purl loops, purl rows - front loops.

Purl stitch in circular rows: Purl all stitches. Garter stitch: work knit and purl rows.

Garter stitch in circular rows: alternately 1 circular row - facial loops. 1 round row - purl stitches.

Rubber: alternately 2 stitches in stockinette stitch. 2 stitches in purl stitch.

Emphasized decreases: knit 2 sts together. 4 sts in garter stitch (2 sts on both sides of the mark). Knit 2 stitches with a slant to the left (= slip 1 stitch like a knit stitch. Knit 1 and pull the removed loop through it).

Knitting density: garter stitch with knitting needles No. 3 - 24 sts x 48 r. = 10 x 10 cm.

Jacket

BACK AND SHELVES:

Cast on 109 (124) 133 sts on needles and knit in garter stitch between the edges. After 13 (16) 17 cm from the initial row, knit the purl row as follows: edge row. 24 (28) 30 sts in garter stitch. Close 8 sts for armhole. 43 (50) 55 sts in garter stitch. Close 8 sts for armhole. 24 (28) 30 sts in garter stitch. edge Leave all loops temporarily.

SLEEVES:

Cast on 40 stitches for each sleeve and knit between the edges in garter stitch. 4 cm from the starting row for sleeve bevels for sizes 56-62 in every 10th r. on both sides add 5 x 1 p. (for size 68-74 in every 8th r. on both sides add 7 x 1 p.) for size 80-86 in every 8th r. on both sides add 3 × 1 p.. then in every 6th p. add 6 x 1 p. After 16 (17) 18 cm from the initial row on both sides, close 1 x 4 p. Set aside the remaining loops.

YOKE:

Take the postponed stitches to work (right front, sleeve, back, sleeve, left front) and knit with garter stitch, while attaching markers in all places of transition from one part to another. For raglan bevels at each marker in every 4th row. underlined decrease 3 (2) 3 x 2 p.. and then in every 2nd p. underlined, decrease 12 (16) 17 x 2 p. At the same time, after 1 cm and after 5 (5.5) 6 cm from the beginning of the yoke on the right shelf, make 1 hole for buttons - knit the second and third loops together. 1 yarn over After 8 (9) 10 cm from the beginning of the yoke for the neckline, leave 5 stitches unknitted on both sides... and then in every 2nd row. leave 3 x 1 stitches unknitted on both sides. Then knit all the loops another 1.5 cm in garter stitch, while making 1 button hole on the right front. Close all loops.

ASSEMBLY:

Lightly moisten the parts, stretch according to the dimensions indicated on the pattern and let dry. Sew the seams of the sleeves and sew up the open area under the sleeves. Crochet the edges of the shelves, the bottom edge and the neckline as follows: *1 tbsp. b/n.. ch 1. skip approx. 0.5 cm *.from* to ‘ constantly repeat and finish 1 connection. in a column in the first st. b/n. Lightly steam all seams. Sew buttons.

Cap:

On stocking needles No. 2.5, cast on 80 (92) 96 sts. Distribute on 4 knitting needles and knit in circular rows 2 (3) 3 cm with an elastic band. Continue working on double needles No. 3. at the same time in the 1st circle.r. evenly decrease 8 sts. After 10 (11) 11 cm from the bar in every 2nd circle. evenly decrease 6 x 8 (7) 8 p.. and then in every 2nd round. constantly knit 2 sts together. Tighten the remaining loops with working thread.

How to knit a jacket for a baby with knitting needles.

Sizes: 50/56 (62/68) 74/80

You will need: 125 (150)175 g turquoise baby Merino yarn (100% merino wool. 95 m/25 g), knitting needles No. 3 and No. 3.5, 5 buttons.

Pattern for strips, knitting needles No. 3: garter stitch (knit and purl stitch – knit stitch).
Stockinette stitch, needles No. 3.5: persons R. – knit p., purl r. - purl P.
Basic pattern, knitting needles No. 3.5: knit according to the pattern. In purl. R. knit loops according to the pattern. Repeat from 1st to 18th row.

Knitting density:

persons satin stitch: 24 p. and 32 r. = 10 x 10 cm;

main pattern: 28 p. and 32 r. =10 x 10 cm.

Special deductions: on the right side chrome, knit 1, knit 2 sts together, then knit with the main pattern, on the left side remove 1 st as knits, k1. and stretch it through the removed stitch, knit 1, chrome.

Back: cast on 64 (74) 84 sts and knit 2 cm (= 5 stripes) with a pattern for the straps. Then knit faces. satin stitch

After 17 (10) 23 cm from the cast-on edge, close 1 (3) 4 p. for the armholes on both sides and decrease with special decreases 3 (4) 5 x 1 p. = 56 (60) 66 p.

After 27 (31) 35 cm from the cast-on edge, bind off the remaining stitches.

Left front: cast on 34 (40) 46 sts and knit 2 cm (= 5 stripes) with a pattern for stripes.

After 23 (27) 30 cm from the cast-on edge, close to cut the neckline on the left side in every 2nd r. 1 x 8.1 x 4.1 x 3.1 x 2.1 x 1 p.

After 27 (31) 35 cm from the cast-on edge, bind off the remaining 16 (19) 23 sts.

Right shelf: knit symmetrically, at the same time every 1 cm and 4 times after the next. 4 cm make 1 hole for buttons next. In the same way, chrome, 1 stitch in garter stitch, remove 1 yarn over, 1 stitch as knit, 1 knit. and stretch it through the removed stitch, then knit with the main pattern in purl. knit yarn overs with facial stitches.

Sleeve: cast on 42 (48) 54 sts and knit 2 cm (= 5 stripes) with a placket pattern. Then knit with the main pattern in the following way: chrome, 9 (12) 15 knits, 26 sts of the pattern with braids (= here add 4 sts in the braids), 9 (12) 15 knits, chrome = 46 (52) 58 sts .

For bevels, add sleeves on both sides alternately every 4th and 6th row. 6 x 1 p. = 58 (64) 70 p.

After 12 (14) 16 cm from the cast-on edge, close the sleeves for piping on both sides by 1 p. and decrease with special decreases in every 2nd p. another 3 (4) 5 x 1 p.

Then close on both sides every 2nd row. 1 x 10 and 1 x 8 p.

After 16 (18) 20 cm from the cast-on edge, bind off the remaining 15 (18) 21 sts.

Assembly: sew in sleeves.

For the collar, evenly cast on 80 sts along the neckline from the inside and then p. distribute the loops next. in chrome pattern, 5 stitches in garter stitch, purl 68, 5 stitches in garter stitch, chrome. In purl. R. knit 68 p. n. persons After 3 cm, start knitting all the loops in garter stitch. And through the trail. Close 2 cm loops.

Turn the collar outward.

Sew buttons.

How to knit pants for a baby.

Sizes: 50/56 (62/68) 74/80.

You will need: 50 g each of white and turquoise, 25 g each of green, lilac and yellow Laby Merino yarn (100% merino wool, 95 m/25 g), knitting needles No. 2.5 and No. 3. Elastic braid 2 cm wide.

Alternately knit 1, purl 1

Basic pattern, knitting needles No. 3:

1st row: chrome, *knit 1, remove 1 stitch, thread at work, repeat from *, chrome.

2nd row: chrome, *remove 1 stitch, thread before work, knit 1, repeat from *, chrome.

3rd-6th row: persons. smooth surface

Repeat from 1st to 6th row.

*2 rub. yellow, 4 r. white, 2 r. green, 4 r. turquoise, 2 r. lilac, 4 r. white. 2 r. yellow, 4 r. turquoise, 2 r. green, 4 r. white, 2 r. lilac, 4 r. turquoise, repeat from *.

Knitting density

Description of work: for the right trouser leg, cast on 59 (64) 69 sts and knit 3 cm with an elastic band. Then knit with the main pattern in the indicated sequence.

For bevels, add on both sides every 4th r. 5 (7) 8 x and in every 6th p., 5 (6) 8 x 1 p. = 79 (90) 101 p.

After 15 (19) 23 cm from the cast-on edge, close 4 stitches on both sides and in every 2nd row. 1 x 2 and 2 x 1 p. = 63 (74) 85 p. Then put the loops aside.

Knit the left leg in the same way.

Transfer the loops of the left and right leg to circular knitting needles and knit a circle r. the main pattern in the specified sequence, with the 1st circle. R. knit chrome. together = 124 (146) 168 p.

After 10 (12) 14 cm from the beginning of the step, set aside the front 62 (73) 84 sts and knit shortened rows on the back 62 (73) 84 sts. To do this, set aside on both sides in every 2nd r. 5 x 5 (6) 7 sts, each time turning the work with 1 yarn over.

After 10 r. knit for the belt on all loops 3 cm with an elastic band, and to avoid holes, knit in the 1st r. yarn overs from the previous one or, respectively, from the next one. together.

Then close the loops.

Assembly: perform internal seams and steps.

Cut 44 (48) 52 cm from the elastic band and sew the ends together. Turn the belt 2 cm inward and sew it on, after inserting an elastic band.

How to knit a baby hat with knitting needles.

Head circumference: 45 cm.

You will need: 50 g of white and the remains of turquoise, green, lilac and yellow Baby Merino yarn (100% merino wool, 95 m/25 g), knitting needles No. 2.5 and No. 3.

Elastic band, white thread, knitting needles No. 2.5: alternately knit 1, purl 1.

Basic pattern, knitting needles No. 3:

1st round: *K1, slip 1 stitch, thread at work, repeat from *.

Round 2: *P1, slip 1 stitch, thread at work, repeat from *.

3rd – 6th circle, row: faces. smooth surface Repeat from the 1st to the 6th round.

Sequence of alternating colors:*2 circle r. yellow, 4 circle r. white, 2 circle r. green, 4 circle r. turquoise, 2 circle r. lilac, 4 circle. R. white, 2 circle r. yellow, 4 circle r. turquoise, 2 circle r. green. 4 circle r. white. 2 circle r. lilac, 4 circle r. turquoise, repeat from *.

Knitting density, main pattern: 26 p. and 44 r. = 10 x 10 cm.

Description of work: cast on 92 sts and knit circle p. 3 cm with elastic band.

Then knit with the main pattern in the indicated sequence.

After 42 laps. R. reduce trace way: mark 4 times every 23rd stitch, knit the previous 2 stitches together with a broach and the next 2 stitches. n. together persons. = in 1 circle p, 8 sts are decreased. Decrease in every 2nd circle, p. do the same until 12 stitches remain, which are pulled together with thread.

How to knit booties for a baby.

Size: 13-20.

You will need: 25 g white Fortissima Piccolino yarn (50% merino wool, 25% viscose, 25% polyamide, 100 m/25 g), hook number 3 and satin ribbon 100 cm long, 0.5 cm wide.

Main pattern: at st. b/n knit in the 1st r. 1st Art. b/n in the 2nd air. p. from the hook and at the end of each p. turn with 1 additional air n. At Art. s/n knit in 1st r. 1st Art. b/n in 4th air. p. from the hook, the first 3 air. p. replace the 1st tbsp. s/n, in each trace. R. replace 1st tbsp. s/n for 3 air. P.

Description of work: for the sole, knit along a chain of 17 air. p. and knit st. b/n = 16 tbsp. b/n.

2nd circle, r.: *for the next arch 1 tbsp. 1 half tbsp., 4 tbsp. s/n, 1 half st., 4 tbsp. s/n, 1 half-st. and 1 tbsp. b/n, repeat from * 5 times. Circle of the river finish 1 connection st in 1st st. b/n.

Cut the thread.

For the middle of the flower, make 1 “bump” in the following way: knit a chain of 4 chain stitches, knit back into the 1st chain stitch. p. 5 stitches knitted together. s/n and finish the “bump” with 1 air. P.

Assembly: sew on the front part along the flower and “bump”, as in the photo. Pull half of the satin ribbon through the 2nd circular row. cuffs

Dressy set for baby

Dressy set for baby

Age: 0-3 months.

MATERIALS 200 g acrylic yarn white, 17 buttons and a square collar.
SPOKES: No. 2.5 and No. 3.

PATTERNS
Elastic band: knit alternately k1, p1. Out. R. knit according to the pattern.
Pearl pattern (pearl pattern): knit alternately knit 1, purl 1, shifting the pattern in each r.
Double rib: knit with rib 1x1, in knit stitch. and out. R. persons p. knit, and purl. n. remove, leaving the thread before work.
Fantasy pattern: according to the diagram.

KNITTING DENSITY 10 cm = 27 p.

Overalls

Back detail
Using knitting needles No. 2.5 for each leg, cast on 28 stitches and knit 3 cm with an elastic band. Continue knitting with needles No. 3 in the pattern according to the pattern, evenly adding to the purl. R. 20 p. = 48 p.
At a height of 13 cm from the elastic band, combine stitches of both legs, picking up 2 stitches between them, and knit straight. At a height of 33 cm from the beginning of knitting for the armholes, decrease on both sides in the first and last 18 sts by 4 sts and knit 14 sts on each side with pearls. pattern, knit the remaining sts in a pattern according to the pattern. After 2 cm, close 7 sts on both sides and decrease in every 2nd p., retreating 7 sts. pattern, 8 times 2 p. and 4 times 1 p. = 36 p. Evenly decrease 7 p. = 28 p. and knit 6 p. pearl pattern. Close off the central 15 sts, tie 7 sts on each side for another 7 cm as straps and bind off all sts.

Front part
Knit like the back piece, but without straps, closing all stitches according to the pattern.

ASSEMBLY
Sew side seams. Along the crotch seam of each part, on knitting needles No. 2.5, raise 105 sts, knit 5 r. with an elastic band and close all stitches according to the drawing. On the fastener strap of the front part in the 3rd row. make 9 holes for buttons (2 stitches together, 1 yarn over). On each strap, make 1 hole for buttons (overcast 1 stitch). Sew buttons. Moisten the finished product and dry it.

Blouse

Back, left shelf
On knitting needles No. 3, cast on 35 sts and knit 2 cm pearls. pattern. Add evenly to purl. R. 7 sts and continue knitting the pattern according to the pattern, performing the first 6 sts with pearls. pattern as a clasp strap. At a height of 11 cm from the pearl. close the pattern for the armhole with 6 stitches and knit straight. At a total height of 22 cm, bind off 16 stitches for the shoulder, 20 stitches for the neckline and finish knitting.

Back, right shelf
Knit symmetrically to the left front.

Before
On knitting needles No. 3, cast on 63 sts and knit 2 cm pearls. pattern. Add evenly to purl. R. 15 p. = 78 p. and continue knitting the pattern according to the pattern. At a height of 11 cm from the pearl. close the pattern for the armholes on both sides, 6 stitches each and knit straight.
At a height of 17 cm from the beginning of knitting, bind off the central 12 sts for the neckline, on both sides of them 5 sts, 3 sts, 2 sts and 1 st. At a total height of 22 cm, bind off 16 sts for each shoulder and finish knitting.

Sleeves
On knitting needles No. 3, cast on 45 sts and knit 2 cm pearls. pattern. Add evenly to purl. R. 13 sts = 58 sts and knit with pattern according to pattern y, adding on both sides every 6th row. 4 times 1 stitch = 66 stitches. At a total height of 14 cm, bind off all stitches and finish knitting.

ASSEMBLY
Sew the seams and sew the sleeves into the armholes. Along the edge of the neckline, using knitting needles No. 2.5, raise 78 sts, knit 3 r. pearl pattern, 2 r. with a double elastic band and close all stitches with a needle. On one of the fastening strips of the back shelves, make 5 holes for buttons (overcast 1 stitch), sew buttons and a collar. Moisten the finished product and dry it.

cap
On knitting needles No. 3, cast on 74 sts and knit 5 cm pearls. pattern. Add evenly
in purl R. 14 sts = 88 sts and knit in a pattern according to the pattern. At a height of 7 cm from the pearl pattern, close 30 stitches on both sides, knit the central 28 stitches another 8 cm and close all stitches. For the bottom binding, cast on 9 stitches on the knitting needles and knit the next stitch. in this way: edge of 2 sts, 5 sts of elastic band, starting from purl 1, edge of 2 sts. At a height of 25 cm, bind off all sts.

ASSEMBLY
Make seams. Turn the trim bordering the face outwards. Sew the bottom trim, leaving 5 cm free for the fastener, making 1 hole for the button. Sew a button. Moisten the finished product and let it dry.

DIY knitted set for boys - hat, jacket and pants

The set is designed for sizes: 50/56; 62/68; 74/80.

We will need:

  • h/w yarn (50g per 220m) – 200; 200; 250g;
  • straight knitting needles No. 3;
  • set of toe knitting needles No. 3;
  • circular knitting needles No. 3;
  • elastic band;
  • buttons to match the color of the yarn – 4 pcs.
  • persons Ch.: for forward/reverse knitting. R. – knit stitches, purlwise. – purl; when knitting in the round - all stitches in all rows. facial;
  • inside out satin stitch: for forward/reverse knitting. R. - purl, purl R. – facial p.; when knitting in the round - all stitches in all rows. - purl;
  • cutting: 1l.x1i.;
  • relief pattern: perform on 2p. – see diagram.

We repeat the horizontal repeat, ending the row with loops after the repeat.

Vertical repeat is equal to 6 rows.

Density: facial. Ch 27p. for 38r. will be 10cm by 10cm; on a relief pattern 23.5 p. for 38r. will be 10cm by 10cm.

How to knit a kit for boys

Jacket

At the first stage, we knit the jacket with a common part, consisting of the back and both front panels.
We dial 107; 117; 125p. and knit the 1st r. (it will purl) knit. p. Next, we move on to the relief pattern, knitting the outer sts with edge stitches.

After 11; 13; 15cm from the first r. along the right edge we make the first hole for the button: closed. 4th point and next. in the row above it we recruit a new one. We make 2 more holes at intervals of 3cm.

At the same time, knitting 13;14; 15 cm from the first r., divide the canvas after 28; 31; 33p. and after 51; 55; 59p. Next, we knit the back and front halves separately.

Back

Central 51; 55; 59p. we knit faces. Ch. Having received a total height of 20.5; 22.5; 24.5 cm, closed P.

Right half front

The first part of the postponed items from 28; 31; 33 pcs. we knit further, distributing the loops: 1 cr., 6 p. – relief drawing, 20; 23; 25p. – persons. Ch., 1 cr.

For rollout after 18.5; 20.5; 22.5cm on the right side we put off 7p. and then closed. in every 2nd r. 1 time in 4 p., 1 time in 3 p., 1 time in 2 p. The remaining loops are closed. at back height.

Left half front

We knit the mirror image of the previous part, but without button holes.

Sleeves

We dial 37; 43; 47p. and knit 1 p. (it will purl) knit. Then we move on to cutting, preserving the edge. n. We perform 1.5 cm.

To expand on both sides, we make an increase in each 12; 14; 16 rub. 3 times 1 p. Having knitted from cutting 12; 14; 16cm, closed All P.

Assembly

We lay out the moistened parts according to the pattern, made in full size, and dry them.

We sew the shoulders.

Using circular knitting needles we raise 53 stitches along the rollout + we take into work the previously set aside 14 stitches. (7 points on each shelf) and make 1.5 cm cuts. We leave the outermost stitches as edge stitches. At 3 p.m. make the last hole for the button. Closed P.

We sew in the sleeves, paying attention to the coincidence of the central row with the shoulder line. Sew side and sleeve seams. To make clothes look neater, finished product Carefully steam the seams.

Sew on the buttons.

Boys' pants

Right part

We start knitting for newborn pants with set 47; 53; 59p. Then we knit 1p. persons (we have it on the wrong side). Next, we move on to a relief pattern, knitting the outer stitches with edge stitches. Having completed 3 p., we move on to the faces. smooth surface For bevels on both sides, add 12 to each; 14; 16 rub. three times 1 p. Having knitted 13; 15; 17cm from the first p., set aside p.

Left part

We perform it in a mirror way with the right one.

General top

We transfer both parts to circular knitting needles, casting 8 stitches between them. for the wedge. On all stitches we perform knits in the round. Ch.

In every 2nd r. we make two decreases: we knit the last stitch before the wedge and knit the first stitch of the wedge in 1L. with a tilt to the left: 1p. we remove knits., 1 l., we thread it through the removed one, the second decrease - the last stitch of the wedge is knitted in 1 l. along with the next n. This pattern of decreases is repeated until 106 is obtained; 118; 130p.

In the middle of the panties we decrease three times by 1 stitch in each 8; 10; 12 rub.

After 22; 26; 30 cm from the cutting we set aside 50; 56; 62p. the front of the pants, the other 50; 56; 62p. We continue knitting the back half in short rows. The scheme is as follows: on both sides in every 2nd r. leave without knitting three times in 3 stitches. Turn R. 1 yarn over.

After 24; 28; 32cm from the cut (we measure along the back of the panties) we take all the eyelets to work. We knit 2 cm in the round. At the same time, yarn overs in the 1st row. knit according to the drawing together with the previous/following loop. We do this so that there are no holes in the capes.

Assembly

We lay out the slightly moistened parts of the pants onto life-size patterns and fix them. Let it dry. We sew the pants along the wedge. We sew the crotch seams. We turn the cut along the fold row to the wrong side and sew it, leaving a gap of 1 cm. We thread an elastic tape into the resulting drawstring and sew up the gap.

cap

For sock sleepers dial 80; 84; 90p. and, having distributed them into 4 sp., we knit in a round 6 cm cutting. We continue with faces. ch., adding 1p. 0; 1; 0p.

Having knitted 8; 9; 10cm from the cut, mark 5p at regular intervals. They should then be knitted inside out.

We decrease in every 2nd row, knitting 7; 7; 8 times marked loop with two adjacent ones (before and after) in 1i. We break the thread, thread it through the remaining stitches, tighten it, and bring it to the wrong side. side and fix it.