Crafts from scrap materials are a very profitable activity. Especially when it comes to knitwear yarn: you simply take unnecessary T-shirts, cut them into pieces and get free knitting material - a kind of yarn. Knitting with it is very quick and convenient, because this yarn is thick and suitable for a large hook. So you can easily crochet a hot pad, a chair pad or crocheted rugs from old T-shirts, which we have already talked about.
To create this yarn, you will need old jersey t-shirts (preferably larger ones) and scissors. It is better to take T-shirts in large sizes to reduce the hassle. Children's knitwear is also suitable for this idea, but cutting yarn from it will be extremely inconvenient. And then the “threads” themselves will turn out to be very short.
The ideal T-shirt for yarn is plain and large. Like this:
How to make yarn from T-shirts? Description of work
For yarn, use the smoothest part of the T-shirt, without unnecessary seams or seals. Therefore, the bottom edge should be trimmed. In addition, you need to cut off the top of the T-shirt along the line from armpit to armpit.
It turns out to be such a “pipe” - knitwear, sewn with two seams on the sides. Then one side edge needs to be folded towards the other, stepping back slightly (literally 2-3 cm). So, the edge from below should protrude, this is a very important condition.
Fold the T-shirt in half again. In this case, the protruding part should still look out from under the layers of knitwear.
Decide what thickness of yarn you need. After cutting, the strips will noticeably shrink, curling into a tube, so the ideal width of the strips is approximately 2.5 cm. It is these strips that folded knitwear should be cut into.
Note: You only need to cut through the T-shirt folded in several layers, but not the protruding edge of the fabric. Make slits all over the T-shirt roll.
Now you can unfold the “pipe” and see what happened. The part of the knit that remains uncut will help the threads become continuous.
Now you need to put on your hand or on a base (for example, on a jar) the piece of fabric that remains uncut.
You must clearly see the cuts so that you can continue working correctly.
Now take the scissors again and make the next cuts diagonally. From the cut of the first row - to the second, from the second - to the third, and so on.
It is this technique that will make the yarn continuous. Otherwise, if you simply cut the T-shirt into straight strips, they would then need to be tied together, which is very inconvenient.
After making all the diagonal cuts and unrolling the knitwear, you will get several meters of finished knitted yarn.
Pull these strips lengthwise: the threads will stretch slightly and curl at the sides, hiding the edges of the fabric.
T-shirt yarn is ready!
Now it needs to be wound into a ball for ease of use.
To make all kinds of crafts from such yarn, you can use not only a hook, but also knitting needles No. 8 or even No. 10.
A knitted rug can perfectly complement your interior
Disused knitwear can still serve its owners, receiving a second life in the form of an unusual household item. Unnecessary T-shirts, T-shirts and knitted jumpers accumulated in closets and on mezzanines encourage people to create all sorts of ways to use old things to decorate the interior.
It’s not at all difficult to make a rug from old T-shirts with your own hands. The time spent will be repaid with pleasant emotions from the creative process.
There are different techniques for creating rugs from old T-shirts. More complicated ones for experienced craftswomen and simpler ones for those new to design.
Types of woven rugs
All the variety of methods can be divided into several main types:
- knitting;
- weaving;
- from braids;
- grid-based;
- on a fabric basis.
Crochet
Knitting without a hook
Materials and tools
To make a rug from old T-shirts, you will need simple tools:
- scissors;
- knitting needles or crochet hook;
- thread and needle;
- cardboard for weaving;
- fabric glue or glue gun if using a fabric base.
Crocheted rug “Yarn” for knitting and weaving rugs is prepared by cutting ribbons 1.5-2.5 cm wide from old T-shirts, T-shirts, tights, and sweatshirts. Knitwear is cut in a circle and in a spiral. The strips are sewn together and twisted into balls to make it easier to work. The strips can be connected in another way. Each strip is cut at a distance of 1.5 cm from the edge. Place on top of each other, aligning the slots. The opposite end of the top strip is passed through the holes from below. To make rugs from T-shirts based on a mesh, rectangles measuring 2 * 12 cm are cut, this is not at all difficult to do with your own hands using a cardboard template.
Preparing threads for weaving
Knitted products
The “knitting” technique is suitable for craftswomen who work with crochet or knitting needles. The rug is knitted in circles to the desired size according to ordinary circular patterns. For knitting, they do not use any complex patterns; they knit the fabric with knit stitches. Even a rug from braids can be made novice master.
Braid rugs
The work is performed in the following order.
- Place 3 ribbons of contrasting colors together and braid them.
- The ends of the blanks are stitched.
- The braids are connected to each other manually or using a sewing machine.
- Twist the braid into a spiral, securing it with threads. The seams should be on one side, this will be the bottom of the product.
Rug with a braid secured with threads
Another way to use braids is this.
- Prepare the base for the carpet from thick fabric.
- Take strips of fabric slightly larger than the width of the base and braid them without braiding them to the end.
- Apply fabric glue to the base and glue the pigtails. All blanks are fastened together with a needle and thread.
Braid rug with glue base
Basketry
Work algorithm:
- For the “weaving” technique, take a round base or a rectangle.
- To weave a round rug, draw a circle of the desired diameter on cardboard. Divide the circle into 36 equal segments. Cut with an allowance of 3 cm from the edge.
- Slots are made along each ray from the edge to the border of the circle to fix the threads. They begin to braid the base clockwise or counterclockwise, passing the knitted strip alternately first above the thread, then under the thread. When the weaving is finished, the tip of the ribbon is secured with a needle and thread.
- The rug can be decorated with pompoms or tassels made from knitwear cut into strips.
Advice! If the rectangular shape of the future product is chosen, prepare a frame of the required size.
Weaving a rug on a frame bar - On the top and bottom bars of the frame, nails are placed at a distance of 2.5-3 cm from each other. Stretch the base using threads of a neutral color.
- The fabric ribbons are passed first over the warp thread, then under it. After weaving is completed, the knots are hidden on the underside and the rug is removed from the frame.
Mesh based products
Work algorithm:
- The base of the mat is a painting or plaster mesh. Cut a piece of mesh to the size of the future carpet.
- They step back 1 cm from the edge and begin to fasten shreds of fabric measuring 2*12 cm into the cells. The shreds are brought in from the bottom of the mesh, pulling them up using a hook. Tie a knot and proceed to the next workpiece. Work begins from the center of the carpet.
The reverse side of the rug showing the mesh base Advice! If there is no construction grid, the foundation ForYou can knit the carpet yourself.
The rug is made by hand on a mesh basis - The fillet mesh is crocheted from polypropylene twine of appropriate thickness. First, knit a chain of chain stitches, then alternate double crochets and chain stitches.
- Based on the mesh, you can make a bargello style rug. The pattern turns out to be unusual and very beautiful. A characteristic feature of the embroidery is a vertical stitch that captures four vertical warp threads. The next stitch is offset by one base thread.
Mat on loin mesh
Fabric-based products
To make a rug, circles with a diameter of 12 cm are cut from old knitted items. A seam is laid along the edges of the workpiece “forward with a needle”, filled with padding polyester and the thread is pulled together.
You can make such a wonderful rug for a baby For filling you can use old blankets made of padding polyester, holofiber from matted pillows, and foam rubber scraps.
The balls are manually sewn to the base. You can use a glue gun to attach the balls.
Volume mat
Caring for rugs
A rug made from T-shirts will serve you for a long time and will be pleasing to the eye. For care, choose hand wash or delicate machine wash. Dry flat in a ventilated area.
This rug is easy to wash both by hand and in a machine. Making rugs from T-shirts with your own hands solves two problems at once. Clearing closets of junk and getting things that will be useful around the house. Transforming old unnecessary things into a useful and beautiful piece of furniture is a real miracle. Rugs made from old T-shirts are akin to painting masterpieces. Even when using the same techniques, the craftswoman ends up with her own version of the rug.
Today, many craftsmen earn money by making various crafts from scrap materials. In particular, this applies to knitted yarn, which is made from old unnecessary items, previously cut into shreds. This way you can get excellent material for knitting. It is very easy and convenient to knit with because it is thick and suitable for the largest size hooks. In this article you will learn how to make knitted yarn from a T-shirt, which can then be used to make kitchen trivets, rugs and chair pads.
How to make yarn from a T-shirt yourself?
You can create yarn from any knitted items, preferably large ones. You just need to take scissors - no special devices are needed anymore.
Important! Children's clothing is quite suitable for such an undertaking, but cutting from it is not very convenient, and the threads are too short. The ideal option is a large, plain item without folds. The main thing is that there are no unnecessary seals, seams, or folds on the T-shirt. Therefore, before starting work, it is better to cut off the bottom edge.
You will also have to remove the top part along the line from one armpit to the other in order to get high-quality yarn from a T-shirt. We'll look at how to do it below:
- After you cut off all the excess, you will end up with a knitted tube, sewn on the sides with two seams.
- Then attach one side edge to the other, stepping back a little, about 2-3 cm. It is important that the edge protrudes from below.
- Fold the product in half again so that the protruding part peeks out from under the remaining layers of fabric.
- Then decide what thickness of yarn you need, because after cutting the strips will shrink greatly and curl into a tube. The ideal strip width is 2.5 cm.
- Cut the folded material into strips like these. You should only cut clothes that have been folded several times, but not the edge of the protruding fabric.
- Make cuts all over the package.
- Unfold the knitted tube and see what you have. Knitwear that remains intact will help your threads not tear among themselves.
- Place an uncut section of material on the jar or hand so that all the cuts are clearly visible - this will help you carry out the work correctly further.
- Take the scissors again and make diagonal cuts. From the cut of the very first row to the second, and so on. By using this technique, your yarn will remain continuous. If you simply cut the material into straight strips, then you will have to tie them together.
- After making the diagonal cuts, unfold the knitwear, resulting in a large piece of knitted yarn.
- Pull the strips a little lengthwise so that they stretch out and curl at the sides, thereby hiding the edges of the fabric.
It's safe to say that your DIY T-shirt knitting yarn is ready. All that remains is to roll it up into a ball for greater convenience.
Where is knitting yarn used?
Such raw materials can be used for knitting covers, rugs, bags, baskets and other crafts. Skilled craftswomen love to use it to make bedding and rugs for kitchen stools and chairs, and hot pads. It is incredibly convenient to work with, thanks to its ideal density and width. So don’t hesitate, find a couple of unnecessary things in your closet, and you will get original, high-quality yarn from T-shirts. With your own hands you will create the perfect material for knitting, and completely free of charge.
Important! If you are encountering this work for the first time, then, as previously mentioned, do not rush to get involved with small-sized clothes. Otherwise, you risk ruining your mood, the material, and moreover, you may be forever disappointed in such an original hand-made version.
How to knit a rug from homemade yarn?
Since you already know how to make yarn from old T-shirts, it's time to make something out of it. For starters, a rug is suitable, the knitting of which is quite simple, one might even say primitive. Even a novice needlewoman can handle it. If you have previously worked with a large hook, you can create a real masterpiece:
- To begin, prepare yarn of several colors that combine as much as possible with each other. Rugs made from pink or coral and gray yarn look original. If your home is eclectic, then it is better to use multi-colored material obtained from old neon things. Ordinary threads are not appropriate here.
- Next, take the thickest hook and the raw material used as a basis.
- Start knitting according to the standard pattern in the round.
Important! If you have any special skills, then feel free to use them in your work. The more original patterns you make in the butt loops, the more attractive the rug you will get.
Crafts from scrap materials are a very profitable activity. Especially when it comes to knitwear yarn: you simply take unnecessary T-shirts, cut them into pieces and get free knitting material - a kind of yarn. Knitting with it is very quick and convenient, because this yarn is thick and suitable for a large hook. So you can easily crochet a hot pad, a chair pad or crocheted rugs from old T-shirts, which we have already talked about.
To create this yarn, you will need old jersey t-shirts (preferably larger ones) and scissors. It is better to take T-shirts in large sizes to reduce the hassle. Children's knitwear is also suitable for this idea, but cutting yarn from it will be extremely inconvenient. And then the “threads” themselves will turn out to be very short.
The ideal t-shirt for yarn is plain and large. Like this:
How to make yarn from T-shirts? Description of work
For yarn, use the smoothest part of the T-shirt, without unnecessary seams or seals. Therefore, the bottom edge should be trimmed. In addition, you need to cut off the top of the T-shirt along the line from armpit to armpit.
It turns out this is a “pipe” - knitwear, sewn with two seams on the sides. Then one side edge needs to be folded towards the other, stepping back slightly (literally 2-3 cm). So, the edge from below should protrude, this is a very important condition.
Fold the T-shirt in half again. In this case, the protruding part should still look out from under the layers of knitwear.
Decide what thickness of yarn you need. After cutting, the strips will noticeably shrink, curling into a tube, so the ideal width of the strips is approximately 2.5 cm. It is these strips that folded knitwear should be cut into.
Note: You only need to cut through the T-shirt folded in several layers, but not the protruding edge of the fabric. Make slits all over the T-shirt roll.
Now you can unfold the “pipe” and see what happened. The part of the knit that remains uncut will help the threads become continuous.
Now you need to put on your hand or on a base (for example, on a jar) the piece of fabric that remains uncut.
You must clearly see the cuts so that you can continue working correctly.
Now take the scissors again and make the next cuts diagonally. From the cut of the first row - to the second, from the second - to the third, and so on.
It is this technique that will make the yarn continuous. Otherwise, if you simply cut the T-shirt into straight strips, they would then need to be tied together, which is very inconvenient.
After making all the diagonal cuts and unrolling the knitwear, you will get several meters of finished knitted yarn.
Pull these strips lengthwise: the threads will stretch slightly and curl at the sides, hiding the edges of the fabric.
T-shirt yarn is ready!
Now it needs to be wound into a ball for ease of use.
To make all kinds of crafts from such yarn, you can use not only a hook, but also knitting needles No. 8 or even No. 10.
http://mousechirpy-polkadotpineapple.blogspot.ru/2008/03/tutorial-t-shirt-yarn.html
Do you know that you can make an unbreakable seamless thread, “yarn” from a T-shirt, the main thing is to know how to cut it correctly. This yarn is used for knitting bags, rugs; decoration different items. We will tell you more about this later, but for now - in detail.
master class on how to cut a T-shirt into yarn
I have a small T-shirt with side seams, but if you take a regular colored T-shirt, preferably without patterns, there will be no seams.
First you need to cut off the top under the sleeves and the bottom tucking seam (although you can simply rip it open, this will add a meter and a half to the yarn).
You will get a pipe. We place it in front of us on the table with the folds up and towards us, and with the cut sides on the sides. Now we bend the lower part, a little less than a third up, as in the picture. You will get 2 layers at the top, four at the bottom. We bend the four-layer part up again, leaving 3-4 centimeters of the upper two-layer part free, see the picture. In total, the lower part is 6 layers, at the top at the fold - only 2. Now mark 3-4 cm, as shown in the figure, so that cut the T-shirt into strips evenly
. You need to cut to the two-layer top, leaving 2-3 cm there uncut. After this, we can unfold the folded layers and we will see our pipe cut into strips.
For clarity, I put it on the roller with the uncut fold upward. Now our task is to cut the strips so that we get an unbreakable thread, our future yarn. To do this, we make diagonal cuts so that the first strip smoothly transitions into the second, the second into the third, etc. Let's look:
Now you need to lightly pull the resulting thread out of the fabric with your hands, rolling it into a ball. It stretches so that the sides curl up, and you get such a thin tube, from which it is then convenient to knit with a thick hook or sew roses.
From my little T-shirt I made this basket for the Little Red Riding Hood costume, but if you take several colored T-shirts, you can.
