Children's hats are always relevant. In winter they keep you warm and protect you from colds. And in the summer they protect the child’s head from overheating. And if we talk specifically about hats for girls, then such a headdress, especially knitted with your own hands, will emphasize the individuality of the child.

For little fashionistas, one hat is usually not enough - after all, many color and design solutions allow you to choose a headdress for almost any outfit. Summer hats for girls with knitting patterns and descriptions presented in this article are available for craftswomen of any qualification.

Openwork summer hat

The model is designed for ages 3-5 years.
Head volume 48-50 cm, height from ears to crown – 16 cm.

We will need:

  • white yarn – cotton (or linen) – 25g;
  • straight sp. No. 2.5 and No. 3;
  • hook.

What patterns will we knit:

  • garter stitch - knit all stitches;
  • stocking stitch - in knit stitches. All loops are knit, in purl rows. – purl;
  • “Gothic openwork” pattern – see diagram:

It is imperative to knit a sample pattern using the selected threads and knitting needles and use it to determine the required number of loops.

Description

For the hat, cast on 91 stitches with needles No. 3 and knit 4p. garter stitch - this will be the edging of our hat.

Let's go to sp. No. 2.5 and begin to knit the openwork. We repeat three times from the 1st to the 15th row. scheme.

To decorate the top of the head, we make decreases throughout the entire canvas. To do this, evenly in 3 front rows we knit the central 3 stitches together. each rapport (4,5,6p.)

In the last r. We knit all the loops of the hats two at a time together. We transfer the remaining ones to the hook. We break the thread, leaving a long end (about 25-30cm). We pass the thread through all the loops and tighten.

Using the same thread, we sew the vertical seam of the hat.

Purple openwork summer hat

The model is designed for ages from 1 to 2 years.

We will need:

  • fine yarn (50 g per 250 m) – 50 g;
  • straight sp. No. 2;
  • hook No. 2;
  • decorative balls in harmony with the color of the threads - 6 pieces.

What patterns will we knit:

  • elastic band: 1 knit x 1 purl;
  • openwork:

1p.: *2p. in 1L., 1N.* – repeat from * to * until the end of the row;

2 rub. and all purl: purl;

3p.: *1n., 2p. in 1l.* - repeat from * to * until the end of the p.

Knitting density: 26p. for 32r. correspond to a square of 10 cm by 10 cm.

Description

We cast on with knitting needles 101 sts. and knit 2.5 cm rubber bands. Next R. evenly decrease 21p.

We switch to “openwork” and knit 10-12 cm - check by trying on. Then we make decreases twice every other row. We knit 2 stitches. together.

We break the thread, thread it through the remaining loops, and tighten it.

Assembly

We make a vertical seam summer hat. We crochet 6 chains of air loops 7-8 cm long. Attach the balls. We sew chains to the bottom of the hat for girls.

Hat for a teenage girl

The model is designed for a head volume of 52 cm.

We will need:

  • blue cotton yarn (50 g per 125 m) – 50 g;
  • set of hosiery sp. №2.5

What patterns will we knit:

  • persons Ch.: – at circular knitting knit all stitches;
  • elastic band: 1 knit x 1 purl;
  • openwork:

3p.: *2p. in 1L., 1N.* – repeat from * to * until the end of the row;

From the 5th to the 7th row: all stitches are knit.

Repeat from 2 p. 7 rubles each

Description

We cast on with knitting needles 136 sts. and switch to circular knitting, distributing the loops into 4 sp. 34 p. for each sp. We knit 5p. rubber bands.

Let's switch to openwork. Having knitted 12 cm with knitting needles, we decrease stitches: 27 times we knit every 4th and 5th stitch in 1L. 109p left.

Next in a row we knit all the loops in 2 stitches. together in 1l. (we have -28 p.). Knit 2 p. persons Ch. Then - again in 2p. in 1l. (in work 14p.).

Knit another 1 p. persons p. Break the thread, thread it through the remaining loops, pull it off, bring it to the wrong side and fasten.

Panama hat for girls

The summer hat is designed for a head volume of 52 – 54 cm.

We will need:

  • yarn, cotton 100% (100g per 330m) lilac color – 30g;
  • yarn of the same quality - a little lemon and light green colors;
  • straight sp. No. 2.5;
  • set of sp. No. 2.5;
  • hook No. 2.5.

What patterns will we knit:

  • persons Ch.: for straight knitting in faces. rows - knit stitches, purl stitches. rows - purl; when knitting in the round – knit all stitches;
  • elastic band: 1 knit x 1 purl;
  • openwork: knit according to the pattern; in purl knit loops in rows according to the pattern, knit yarn overs. P.

Description

For the Panama hat, cast on 210p green yarn using 2.5 knitting needles. and knit 4p. persons Ch. At 5 p.m. to get a jagged edge on the fold, knit on all stitches, alternating: 2p. in 1l., 1n.

Continue 4 r. light green, then change color: 4p. lemon thread, 2 p. – light green, 5 rubles. – lemon. In the last r. evenly decrease 120p. 90 p. left.

Knit 4 repeats in height, then reduce the number of loops by half. We continue 4 rubles. persons ch., in the 5th r. Once again we reduce the number of stitches by half. Knit 1 p. persons Ch. Do not close the loops.

Assembly

Break the thread, thread it through the remaining loops, pull and fasten. Sew the edges of a girls' hat. Crochet a cord from air loops.

Thread it through the holes on the pattern at the transition point to the brim of the panama hat - this way we can adjust the desired width. If desired, the cord can be replaced with a satin ribbon.

Flower

Crochet 6 chain stitches (VP) with lilac yarn, connect into a ring. Knit 12 single crochets (SC) into its middle.

Next R. knit 6 arches from - repeat between brackets.

On each of the arcs, knit a petal from. Repeat between brackets.

The following model may be useful for a girl on cool evenings that sometimes occur in the summer.

Hat with "Waves" pattern

Head volume: 50 cm – 52 cm

We will need:

  • yarn -50g (50g per 200m);
  • sp. circular No. 2.5;
  • marker.

What patterns will we knit:

  • elastic band: 1 knit x 1 purl;
  • pattern according to the diagrams:

Designations used:

A: add p. from broach prev. row, knitting faces. for the upper lobule;

IN: add p. from broach prev. row, knitting faces. for the lower lobule;

twisted ABC: remove 1 p., another 1 p. remove as when knitting a crossed purl, return 2 removed stitches to the left sp. in a new location, remove 2p. together, 1 l., stretch the removed stitches through the knitted stitches.

Knitting density:

Description

Cast on with needles No. 2.5 126 stitches, place a marker, close the knitting in a circular r.

Knit 9p. rubber bands. Next R. add stitches: *p1, A, 2p., A, 3p., A, 2p., B, 1p.* - repeat from * to * for the entire row. Total 182p.

We continue to work according to scheme No. 1, doing rapport from 13 stitches in a circle 14 times. Repeating in height 4 times 8 r. cx. No. 1, repeat the 1st and 2nd rows again.
Next we use cx in our work. No. 2. Repeat rapport 7 times. In total there are 175p in work.

Having knitted 26 rubles. cx. No. 2, break the thread, thread it through the remaining 7 stitches, pull it off, bring it to the wrong side and fasten. Lightly moisten the product, pull it suitable shape and dry.

Summer hat for a teenager: MK video

Summer beret for a girl

Knitting density: 24p. for 36 rub. correspond to a square of 10 cm by 10 cm.

Description

We cast on with needles No. 2.5 100 stitches, set a marker and close the knitting in the round. We knit 3 cm of elastic. We change sp. on No. 3.25, evenly add 80p. We get 180p in work.

We break the thread, thread it through the remaining loops, tighten it, bring it to the wrong side and fasten it. Lightly moisten the product, stretch it onto a suitable shape and dry.

How to knit a summer openwork hat: video mk

For spring-summer you can knit these wonderful ones for little fashionistas Panama hats. Bright and floral, they will be a beautiful addition to any baby's outfit.

So, we knit like this flowerbed hats


We will need:

yarn - YarnArt Begonia 169m/50g (consumption for the hat itself - 1 skein);
hooks - No. 2.1 and No. 2.5.

Abbreviations:
v.p. - air loop
СС - connecting post
RLS - single crochet
CH - double crochet
С2Н - double crochet stitch
С3Н - double crochet stitch

We take this pattern as a basis, but during the knitting process we will make our own adjustments.

The hat is obtained for OG 48-50 cm.

Notes
Each row starts with 4 ch. - 3 lifting loops and 1 ch. for the arch. The hat pattern itself is knitted in the form of the so-called. "tick" - 2 dc, separated by 1 ch. into the arch of the previous row. The expansion of the bottom to the required diameter occurs by uniformly adding 6 “checkmarks” in each row. So that the corners in the places of increases do not stand out sharply, the increases in each next row are made offset by half a segment relative to the previous one.

So,
4 v.p. close it in a ring.
1r. - 4 v.p. (3 lifting loops and 1 ch for the arch), 11 CH.
2 rub. - in each arch of the previous row we knit 2 dcs, separated by 1 ch. It turns out 12 t.n. "tick".
3 rub. - we begin to make “tick” increases. In each subsequent row there will be six such increases. The essence of this increase is to knit an additional “tick” between the arches of the previous row.

4r. - make 6 tick increments every 3 ticks of the previous row.
5 rub. - make 6 tick increments every 4 ticks of the previous row.
6r. - we knit without increments. In each arch of the previous row we knit 2 dcs, separated by 1 ch.
7r. - make 6 tick increments every 5 ticks of the previous row.

8 rub. - we knit without increments. The bottom begins to round out a little.
9r. - make 6 tick increments every 6 ticks of the previous row.
This is where the increases end and we continue to knit the hats to the required depth without them. I'm pretty good with the number Pi; my bottom is 13 cm.
I got 26 rows from the beginning of knitting and the height of the hat to the brim is 17 cm.

For the fields we knit 2 rows of sc. In the second row we make increases in every 5th column. In the next row, in each top of the column of the previous row, we alternately knit 1 embossed column and 1 DC. That. crochet number 2.1 we knit three rows of fields. Then we change the hook to No. 2.5 and knit 2 more rows. The photo shows that the brim becomes perpendicular to the hat itself from the first row of knitting. We knit the last row in crab step with crochet number 2.1. On last photo I showed what the seam looks like. The hat is ready!

NOTES

Perhaps this pattern will help someone when knitting fields. One Osinochka sent it to me in the form of a question. Option #1 is correct. We knit in one column - relief, in the second - regular, etc.

The fields can and even need to be steamed.

Increases for fields can be made more often, the main thing is to ensure that they diverge evenly and do not go in waves.

ROSE

yarn - YarnArt Begonia 169m/50g;

hook - No. 2.5.

The size of the rose directly depends on the chosen yarn, hook and the initially selected number of chain stitches. in a chain. I never type them by sight, because... I often tie the same hats and “a little more - a little less” doesn’t suit me. But the first time, of course, you need to go through experience.

We take this diagram as a basis.

We collect a chain of 69 vp.
1r. - we knit a dc into the 5th loop of the chain. Then through one loop into the next ch. we tie the chains with 2 dcs separated by 1 ch. We knit that way. to the end of the row.
2 rub. - knit 3 ch. lifting and turning the work. In the first arch we knit another 1 dc, 3 ch. and 2 dc. Then, to the end of the row, we knit 2 dc, 3 ch, 2 dc in each arch.

3 rub. - we knit 9 dc into each arch of the previous row. We start the first petal with 3 ch. We roll up the rosette, and that’s it. It really takes a long time to knit the 3rd row, but it’s worth it.

LEAVES

We knit a chain of 15 ch. We knit a sc into the second loop of the chain. Then in each loop to the end of the chain - half-column, 2 CH, 2 C2H, 3 C3H, 2 C2H, 1 CH, 1 half-column, 1 RLS. We turn the leaf and reverse side we knit in a mirror order - 1 sc, 1 half-column, 2 dc, 3 dc, 2 dc, 2 dc, 1 half-dc, 1 sc. We connect with the help of SS to the tip.


Next, using a SS (only through the leaf), we knit a groove in the middle of the leaf. We knit an additional 25 ch. - 10 v.p. for the stem and 15 vp. for the second leaf, which we knit similarly to the first. We return to the beginning along the stem using the same SS.

We dial 15 v.p. for the third leaf and knit it in the same way as the previous two. The branch of leaves is ready. In the last 2 photos I showed how you can twist them. The first one shows a standard branch peeking out from under something. In the second photo the leaves are located as on the 3rd hat from this MK.

FLOWER

We take this diagram as a basis. We won't change practically anything. But I always have room for the 7th leaf, although there are six of them in the original. Well, in the original the flower is in bud, but mine is always in full bloom.

You can start with 2 ch. and in the first of them knit 12 RLS. Or you can make a lazy loop like I did and first knit 1 ch from it, and then 12 sc and pull the free end. That. You can tighten the middle tighter.

We knit 11 ch. (10 vp - the base of the future petal and 1 vp rise). We knit a sc into the second loop of the chain, then into each end of the chain - 1 half-column, 6 dc, 1 half-column, 1 sc. (All columns are knitted into 1 half-loop of the chain, because then you will need to tie the second half-loop so that the third one peeks out.) Attach the petal to the base-middle, knitting one from two columns of the base. We collect a chain of 11 vp. and knit the second petal in the same way. That. All subsequent petals are also knitted.

The binding can be made in a contrasting color, or the same color. We attach the thread and, using the sc, tie all the petals one by one behind the back half-loop. At the top of each petal we knit 3 ch. Probably so that the ends are sharp. Look like that's it.

I made the headband on the last hat by twisting 6 threads of different colors into a rope, pulling it through the hat, tying the ends and weaving them into a braid, which I twisted with a monogram and sewed on. The monograms themselves can be made in different ways. You can knit chains from vp. and sew them on, or you can use a chain stitch. This is something closer to someone. On holey hats, I like to lay it out the way I want, and then sew it.

Panama "Bee's Happiness" and its derivatives


You will need:

Yarn - Yarn Art Begonia, 100% cotton, 169 m/50 g. For OG 48-50, consumption is 1 skein.
Hooks - No. 1.5, 2.1.

Notes:
The Panama hat consists of 16 reports and is designed for a width of 48-50 cm. To increase or decrease it by 1.5-2 cm, you can add or remove one report. Each row begins with 3 lifting loops.

So, let's begin.

Hook No. 2,1.
5 v.p. close in a ring.
1st row - 3 v.p. lifting, 15 CH.
2nd row - from each column of the previous row we knit a relief column and separate them with 1 ch.

3rd row - at each vertex of the column of the previous row we knit simultaneously 1 dc, 1 relief column, 1 ch. = 1 report.

4th row - DC, vp, relief column, vp. That. from the dc of the previous row we knit a dc, from the embossed column - the embossed one.

5th row - from 1 dc of the previous row we knit 2 dc, 1 ch, from a relief st. - embossed, 1 v.p.

6th row - from 1 dc we knit 2 dc, then sequentially into each end of dc, 1 ch, relief stitch, 1 st. P.

8th row - from 1 dc we knit 2 dc, then in 2 vertices dc before. row - 2 dc (we skip the 4th vertex), 1 ch, relief st., 2 v. p. Starting from this row, the pattern will shift due to knitting 2 dc in the first vertex and not knitting dc in the fourth.

Size: 6-7 years, head circumference - 51-52 cm
You will need: 50 g lilac yarn (100% mercerized cotton, MAXI, weight: 100 g, length: 565 m), hook No. 1, satin ribbon, regillin.
Description of work:

Cast on 6 air loops, close them in a ring and knit according to pattern 1 until the bottom reaches the required diameter, in our case 16.5 cm.

Next we knit without increments until the depth of the cap reaches 18 cm. Then we knit one row with fillet mesh for satin ribbon(alternately st. s/n and v.p.), we knit another circular row st. b/n.

Now let's move on to the fields. We knit the fields according to pattern 2.

Flower

Knit according to the pattern, make the core of the flower using the technique described below, and sew it into the center of the flower. Make the middle of the flower according to the principle of the Irish berry: wind the thread around a pencil 8-10 times, carefully remove the resulting ring from the pencil and tie it with a st. b/n, inserting the hook into the center of the ring. Connect a row of connections. column. Next, continue tying the row in a circle, st. b/n, inserting the hook not into the loops of the previous row, but into the center of the ring.

Insert the ribbon into fillet mesh, sew on a flower and your hat is ready!

Crochet summer children's hat with “Rose” brim

Size: 2 years, head circumference - 48-49 cm
You will need: 50 g of pink yarn (100% mercerized cotton, Alize Miss, weight: 50 g, length: 280 m, No. 170) and 5 g of milky color (No. 62), hook No. 1, regiline, satin ribbon.
Description of work:
Cast on 8 chain stitches with pink thread, close them in a ring and knit according to the pattern

We knit regilin into the last row. In order for the fields to hold well, it is better to use two regiline fishing lines at once. We measure the required length close to the fields of the regilina, make a “double” ring (I carefully connected the fishing line with a thin layer of tape). And we tie it with single crochets in a circle.

Roses (2 pcs.)

Tie 2 roses: pink and milky.

For the rose, dial 59 ch.
1st row: 3 ch. rise, st. s/n in the fourth loop, vp, * st. s/n in the next loop, vp, st. s/n in the same loop - it turns out the letter V, ch. * - repeat until the end of the row. It should be 30 V.
2nd row: 3 ch. rise, st. s/n, 3 vp, 2 tbsp. s/n in the same arch of the letter V, * 2 tbsp. s/n, 3 vp, 2 tbsp. s/n in the next arch of the letter V * - repeat until the end of the row.
3rd row: 3 ch. rise, 8 tbsp. s/n in the arch of the double letter V, * 9 tbsp. s/n in the next arch * repeat 6 times.
Twist the resulting braid in a circle and sew it with thread, as in the photo.

Sew roses to the hat.
To shape the hat, I sprinkled it with water and pulled it onto the shape (jar, ball, ball).
Pull the satin ribbon in and tie it with a bow at the back.
The hat is ready!!!


The bottom diagram is not complete, there should be another row with an extension, where the extension goes through 3 fans. I’ll try to explain in words, because I’m unlikely to be able to draw better. For the bottom, the repeat of the pattern in height is repeated 4 times, the first time by 6 fans, the second by 12, the third by 18, the fourth by 24, and then it is knitted without increases, i.e. 24 rapports are just enough to fit the head circumference. The expansion is due to an arch of 3 ch, which is knitted in a row between fans of 7 dcs. (then in the next row the hdc is knitted into this arch). First these extras. the arches are knitted between each fan, then after 2, then after 3. In words it seems a lot and complicated, in fact everything is very simple, I didn’t even tie the bottom, the first time and without any pattern, this extension of the pattern worked out well for me
Flowers for decoration are also by eye. 6 v.p. close in a ring.
2nd row: *2dc, ch 7*, repeat 6 times.
3rd row: each arch of 7 vp. tie *sc, hdc, 10 dc, hdc, sc*, sl st in dc of previous row.
Tie a flower with a contrasting thread *SS, ch*
Panama hat is knitted from chamomile yarn, hook number 2, head circumference approx. 50cm.




After the Panama hat is knitted to the required depth, the row that comes after the fans (3 sc, 5 ch) is tied with sc, then a row of arches is knitted, 5 ch each. (2 pieces per 1 pattern repeat). And then the fields according to the fan pattern. At the base of the fan I knitted 9 DCs, in the last row I replaced 3 DCs tied together with 2 DCs together, and then tied the fans with arches of 3 chain stitches. I also stretched a ribbon along the last row of the pattern.

Head circumference: for any circumference.
Yarn: “Ivushka” Semenovskaya yarn (50% cotton, 50% viscose, 430 m/100 g).
Hook: No. 2

Description: Crochet Panama hat for girls

We start knitting a children's panama hat from the top of the head.
To do this, fold the thread into a ring.
1st row: tie a ring of thread. 3 chain lifting loops, *chain loop, double crochet* - repeat 13 times, chain loop, connecting loop (we close the knitting in a circle). Tighten the ring by pulling the non-working end of the thread.

We knit a circle according to the pattern to the required diameter.

After knitting a circle of the required diameter, we knit without increments: *double crochet, chain stitch* to the required depth. We insert the hook under the arches of air loops.

Then yarn white knit 3 rows with single crochets.
Tie the edge of the Panama hat with openwork scallops.


Pattern for crocheting the edge of a Panama hat.

Photo: Crochet Panama hat for girls

The hats are knitted for 5-6 years, for a head circumference of 52-53 cm. Threads are 100% cotton, Lily from Yarn Art Turkey. Hook No. 1.5.

crochet knitted hats


The bottom diagram is not complete, there should be another row with an extension, where the extension goes through 3 fans. I’ll try to explain in words, because I’m unlikely to be able to draw better. For the bottom, the repeat of the pattern in height is repeated 4 times, the first time by 6 fans, the second by 12, the third by 18, the fourth by 24, and then it is knitted without increases, i.e. 24 rapports are just enough to fit the head circumference. The expansion is due to an arch of 3 ch, which is knitted in a row between fans of 7 dcs. (then in the next row the hdc is knitted into this arch). First these extras. the arches are knitted between each fan, then after 2, then after 3. In words it seems a lot and complicated, in fact everything is very simple, I didn’t even tie the bottom, the first time and without any pattern, this extension of the pattern worked out well for me
Flowers for decoration are also by eye. 6 v.p. close in a ring.
2nd row: *2dc, ch 7*, repeat 6 times.
3rd row: each arch of 7 vp. tie *sc, hdc, 10 dc, hdc, sc*, sl st in dc of previous row.
Tie a flower with a contrasting thread *SS, ch*
Panama hat is knitted from chamomile yarn, hook number 2, head circumference approx. 50cm.




After the Panama hat is knitted to the required depth, the row that comes after the fans (3 sc, 5 ch) is tied with sc, then a row of arches is knitted, 5 ch each. (2 pieces per 1 pattern repeat). And then the fields according to the fan pattern. At the base of the fan I knitted 9 DCs, in the last row I replaced 3 DCs tied together with 2 DCs together, and then tied the fans with arches of 3 chain stitches. I also stretched a ribbon along the last row of the pattern.

Head circumference: for any circumference.
Yarn: “Ivushka” Semenovskaya yarn (50% cotton, 50% viscose, 430 m/100 g).
Hook: No. 2

Description: Crochet Panama hat for girls

We start knitting a children's panama hat from the top of the head.
To do this, fold the thread into a ring.
1st row: tie a ring of thread. 3 chain lifting loops, *chain loop, double crochet* - repeat 13 times, chain loop, connecting loop (we close the knitting in a circle). Tighten the ring by pulling the non-working end of the thread.

We knit a circle according to the pattern to the required diameter.

After knitting a circle of the required diameter, we knit without increments: *double crochet, chain stitch* to the required depth. We insert the hook under the arches of air loops.

Then use white yarn to knit 3 rows with single crochets.
Tie the edge of the Panama hat with openwork scallops.


Pattern for crocheting the edge of a Panama hat.

Photo: Crochet Panama hat for girls

The hats are knitted for 5-6 years, for a head circumference of 52-53 cm. Threads are 100% cotton, Lily from Yarn Art Turkey. Hook No. 1.5.

crochet knitted hats