A wonderful men's jacket with a hood, fashionable gray, suitable for a student for everyday life. The model is simple and easy to implement.
Dimensions: 48/50, 52/54 and 56/58
Differing data for sizes 52/54 and 56/58 are given in parentheses, sequentially separated by a dash. If there is only one number, then it applies to all three sizes.
You will need:
- yarn (100% sheep wool; 100 m/50 g) 950 (1000-1050) g beige melange;
- circular knitting needles No. 5, length 80 cm and 120 cm;
- circular knitting needles No. 6, length 80 cm;
- stocking needles No. 6;
- 11 light beige buttons with a diameter of 2 cm.
Patterns and knitting:
Rubber: alternately 1 knit, 1 purl.
Garter stitch: front and back rows facial loops.
Pearl Pattern: alternately 1 front, 1 purl, in each row the pattern is shifted by 1 loop. Knitting density: 24 p. x 26 p. = 10 x 10 cm, knitted with elastic using knitting needles No. 5; 16 p. x 32 r. = 10 x 10 cm, knitted in garter stitch with needles No. 6; 15p.x28r. = 10x10cm, knitted with a pearl pattern using knitting needles No. 6.
jacket with hood knitting description:
Back:
on short circular needles No. 5, cast on 126 (136-144) sts and for the bottom bar, knit with an elastic band of 3 cm = 8 r. In the last row of the elastic, evenly decrease 42 (46-48) sts, to do this, sequentially knit 2 sts together with knit stitches = 84 (90-96) sts. Switch to needles No. 6 and knit in garter stitch. After 51 cm = 164 rubles. close on both sides for the armholes, first 4 stitches, then in every 2nd row. 1 time for 3 p., 1 time for 2 p. and 3 (4-5) times for 1 p. = 60 (64-68) p. At a height of 23 (24-25) cm = 74 (76-80) R. close the middle 22 (24-26) sts for the neckline and transfer 19 (20-21) sts for the shoulders to auxiliary threads on both sides.
Left shelf:
on short circular needles No. 5, cast on 60 (66-70) sts and for the bottom bar, knit with an elastic band of 3 cm = 8 r. In the last row of the elastic band, evenly decrease 20 (22-23) stitches, to do this, knit 2 stitches together in sequence = 40 (44-47) stitches. Switch to needles No. 6 and knit in garter stitch. At a height of 51 cm = 164 rubles. from the elastic band on the right edge, start knitting the armhole; to do this, decrease the loops as on the back = 28 (31-33) p. At the same time, at a height of 16 (17-18) cm = 52 (54-58) p. from the beginning of the armhole, close from the left edge for the neckline 7 (8-8) p. Then to round the neckline in every 2nd r. cast off another 2 (3-4) times, 1 st each = 19 (20-21) shoulder sts. Transfer the front shoulder loops to the auxiliary thread at the same height as the back shoulder loops. Right front: knit symmetrically to the left front.
Sleeves:
on short circular needles No. 5, cast on 60 (62-66) sts and for the cuff, knit with an elastic band of 3 cm = 8 r. In the last row of the elastic band, evenly decrease 22 (22-24) stitches, to do this, knit 2 stitches together with knit stitches = 38 (40-42) stitches. Switch to needles No. 6 and knit with a pearl pattern. On the 13th from the elastic band for bevels, first add 1 p. on both sides, then in every 12 (12-10) p. another 11 (12-13) times 1 p. = 64 (66-70) p., add added loops to the pearl pattern. At a height of 60 cm = 168 sts from the elastic band, close on both sides for the roll, first 4 sts, then in every 2nd r. 1 time for 3 p., 2 times for 2 p., 1 (2-4) times for 1 p., in every 4th r. 7 times 1 p. and in every 2nd p. 2 more times, 2 sts each. In the next purl row, bind off the remaining 18 sts. Knit the second sleeve in the same way.
Pockets:
on short circular needles No. 5, cast on 24 sts and knit 1 cm = 3 r. with an elastic band. Continue the work with a pearl pattern using knitting needles No. 6 and after 14 cm = 40 r. transfer the loops to the auxiliary thread. Knit the second pocket in the same way.
Assembly:
Pin the details onto the pattern, moisten and leave until dry. Connect open shoulder loops. Sew side seams. Using circular knitting needles No. 6, cast on stitches for the hood: along the edge of the neck of the right front 30 (32-34) sts, back 22 (24-26) sts, left front 30 (32-34) sts = 82 (88-94) ) p. and knit with a pearl pattern. After 29 cm = 82 r. distribute the loops onto 3 double needles: on the 1st knitting needle - 30 (32-34) sts, on the 2nd knitting needle 22 (24-26) sts, on the 3rd knitting needle 30 (32-34) sts. Upper part of the hood is knitted using the classic heel-toe knitting technique: in the 1st person. row loops of the 1st and 2nd knitting needles according to the pattern until last loop Knit the 2nd knitting needle, the last loop of the 2nd knitting needle and the 1st loop of the 3rd knitting needle together with a slant to the left (= slip 1 stitch as in knitting, knit the next loop and pull the removed loop through the knitted one). Turn, remove 1 stitch, then knit the loops of the 2nd knitting needle according to the pattern along the last loop, purl the last loop of the 2nd knitting needle and the 1st loop of the 1st knitting needle. Turn and remove the 1st stitch. Repeat these decreases until all the side loops of the 1st and 3rd needles are knitted and only the loops of the 2nd needle remain. Close these loops.
Clasp strap:
cast on long circular knitting needles No. 5 along the front edges of the shelves for 113 (115-117) sts and along the edge of the hood 106 (112-118) sts = 332 (342-352) sts and knit 9 r. garter stitch. At the same time, on the left shelf bar in the 5th circle. knit 11 button holes. To do this, knit in the following sequence: edge, k1, bind off 2 sts, knit 8, repeat 9 times, bind off 2 sts, knit the remaining stitches. In the next row of the bar, instead of closed loops, cast on 2 new loops. After 9 p.m. close the strap loops. Sew the pockets to the shelves above the bottom strips at a distance of 5 (6-7) cm from the side seams. Sew the seams of the sleeves, sew in the sleeves. Sew buttons.
Size
48/50 (52/54) 56/58You will need
Yarn (100% sheep wool; 100 m/50 g) – 950 (1000) 1050 g beige melange; circular knitting needles No. 5, length 80 and 120 cm; circular knitting needles No. 6, length 80 cm; stocking needles No. 6; 11 light beige buttons with a diameter of 2 cm.Patterns
Rubber
Alternately 1 knit, 1 purl.Garter stitch
Front and back rows - front loops.Pearl pattern
Alternately knit 1, purl 1, shift the pattern by 1 stitch in each row.Knitting density
24 p. x 26 r. = 10 x 10 cm, knitted with elastic on knitting needles No. 5;16 p. x 32 r. = 10 x 10 cm, knitted in garter stitch on needles No. 6;
15 p. x 28 r. = 10 x 10 cm, knitted with a pearl pattern on needles No. 6.
Pattern
Completing of the work
Back
On short circular needles No. 5, cast on 126 (136) 144 stitches and for the bottom bar, knit with an elastic band of 3 cm = 8 rows.In the last row of the elastic, evenly decrease 42 (46) 48 sts; to do this, knit 2 sts in sequence = 84 (90) 96 sts.
After 51 cm = 164 rubles. close for the armholes on both sides, first 4 p., then in every 2nd row 1 x 3 p. and 1 x 2 p. and 3 (4) 5 x 1 p. = 60 (64) 68 p.
At a height of 23 (24) 25 cm = 74 (76) 80 r. close the middle 22 (24) 26 sts for the neckline and transfer 19 (20) 21 sts to auxiliary threads on both sides of them.
Left shelf
On short circular needles No. 5, cast on 60 (66) 70 loops and for the bottom bar, knit with an elastic band of 3 cm = 8 rows.In the last row of the elastic, evenly decrease 20 (22) 23 sts, to do this, knit 2 sts in succession = 40 (44) 47 sts.
Switch to size 6 needles and knit in garter stitch.
After 51 cm = 164 rubles. make an armhole like on the back = 28 (31) 33 p.
At the same time at a height of 16 (17) 18 cm = 52 (54) 58 r. from the beginning of the armhole, close from the left edge for the neckline 7 (8) 8 p.
Then, to round the neckline, close in every 2nd row another 2 (3) 4 times, 1 p. = 19 (20) 21 shoulder p. Transfer these loops to the auxiliary thread at the same height as on the back.
Right shelf
Knit symmetrically to the left front.Sleeves
On short circular needles No. 5, cast on 60 (62) 66 stitches and for the cuff, knit with an elastic band of 3 cm = 8 rows.In the last row of the elastic, evenly decrease 22 (22) 24 sts, to do this, knit 2 sts in succession = 38 (40) 42 sts.
Switch to needles No. 6 and knit with a pearl pattern.
On the 13th from the elastic band, add 1 stitch on both sides to bevel the sleeves, then 12 (12) 10 rubles in each. another 11 (12) 13 times 1 p. = 64 (66) 70 p. Include added loops in the pearl pattern.
At a height of 60 cm = 168 sts from the elastic band, close on both sides for the roll, first 4 sts, then in every 2nd r. 1 x 3 p., 2 x 2 p., 1 (2) 4 x 1 p., in every 4th r. 7 x 1 p. and in every 2nd r. another 2 x 2 p.
In the next purl row, bind off the remaining 18 stitches of the sleeve.
Knit the second sleeve in the same way.
Pockets
On short circular needles No. 5, cast on 24 loops and knit 1 cm = 3 r. with an elastic band.Continue the work with a pearl pattern using knitting needles No. 6 and after 14 cm = 40 r. transfer the loops to the auxiliary thread.
Knit the second pocket in the same way.
Assembly
Pin the details onto the pattern, moisten and leave until dry.Connect the open shoulder loops with a loop-to-loop stitch.
Sew side seams.
Hood
Using circular knitting needles No. 6, cast on 82 (88) 94 stitches for the hood (along the edge of the neck of the right front 30 (32) 34 sts; along the back neck 22 (24) 26 sts; along the edge of the neck of the left front 30 (32) 34 sts .). Knit on cast-on stitches with a pearl pattern.After 29 cm = 82 r. distribute the loops onto 3 double needles: on the 1st and 3rd knitting needles, 30 (32) 34 p., on the 2nd knitting needle - 22 (24) 26 p.
The upper part of the hood is knitted using the classic heel-toe knitting technique: knit 1. R. Knit the loops of the 1st and 2nd knitting needles according to the pattern until the last loop of the 2nd knitting needle.
Turn, remove 1 stitch, then knit the loops of the 2nd needle according to the pattern until the last stitch, purl the last stitch of the 2nd needle and the first stitch of the 1st needle together. Turn and remove the first stitch.
Repeat these decreases until all the side loops of the 1st and 3rd needles are knitted, i.e. Only the loops of the 2nd needle will remain. Close these loops.
Clasp bar
For the fastener strap, cast on long circular needles No. 5 along the front edges of the shelves for 113 (115) 117 stitches and along the edge of the hood 106 (112) 118 sts = 332 (342) 352 sts.Knit 9 rows in garter stitch, on the left front placket in the 5th round. R. knit 11 button holes. To do this, knit in the following sequence: edge, knit 1, knit 2 stitches, knit 8, from * repeat 9 times, knit 2 stitches, knit the remaining stitches.
In the next row of the bar, instead of closed loops, cast on 2 new loops. After 9 p.m. close the strap loops.
Sew the pockets to the shelf above the bottom strips at a distance of 5 (6) 7 cm from the side seams.
For the front strips, cast on 110 stitches on the knitting needles along the sides of the shelves, including the short sides of the neck strip, and knit in the same way.
Sew the seams of the sleeves, sew in the sleeves.
Sew buttons.
Photo: Knitting magazine. Burda" No. 4/2013
It can be simply irreplaceable in certain circumstances. And it looks just great. Made it today small selection jackets with a hood. Look.
Lilac jacket
knitting
Dimensions: 38/40 (42/44)
You will need: 1100 (1150) g purple melange yarn Eve Color (44% wool, 43% polyacrylic, 13% polyester, 93 m/50 g), straight needles No. 6 and No. 7, circular needles No. 6, 5 buttons with a diameter of 36 mm.
Facial surface: persons R. – persons p., out. R. - purl P.
Garter stitch: persons and out. R. – persons P.
Pattern for planks, knitting needles No. 6: 8 r. persons smooth, 2 r. garter stitch (= fold line), 8 p. persons smooth, 2 r. garter stitch = 20 rub.
Paths made of strands (7 p. wide): odd number of loops. 1st – 8th row: persons. smooth surface; 9th row: chrome, * 1 purl, 1 stitch, remove as purl, thread before work, repeat from * 1 purl, chrome; 10th row: purl. p. 11th row: chrome, 1 p. remove as purl, thread before work, purl 1, repeat from *, 1 p. remove as purl, thread before work, chrome; Row 12: purl. P.; 13th – 20th day: persons. smooth surface; 21st r.: as 11th r.; 22nd row: purl. P.; 23rd r.: like 9th r.; 24th row: purl. n. Repeat from 1st to 24th r.
Rubber, knitting needles No. 6: alternately knit 1, purl 1.
Knitting density. Pattern for stripes: 16 p. and 20 r. = 10 x 7 cm; paths made of plaits: 16 p. and 28 r. = 10 x 10 cm; elastic band (slightly stretched): 20 p. and 28 r. = 10 x 10 cm; persons satin stitch, knitting needles No. 7: 16 st. and 24 rub. = 10 x 10 cm.
Back: on knitting needles No. 6, cast on 66 (74) sts and knit 7 cm = 20 r. pattern for planks. Next, knit in paths of strands, while in the 1st row. evenly add 19 sts = 85 (93) sts. After 45.5 cm = 128 r. (47 cm = 132 r.) Close from the bar on both sides for the armholes 1 x 4 sts, then knit the middle 2 sts to fit the edges before closing the loops together, then in every 2nd r. close every 2nd r. 1 x 3 sts, with the last 2 sts knit together before closing the loops, then cast off 1 x 2 sts, with 2 sts knit together before closing the loops, then cast off another 3 x 1 sts = 61 (69) p.
Attention: On the pattern, the decreases for the fit of the edges are not taken into account. After 63.5 cm = 178 rub. (66.5 cm = 186 r.) close from the bar on both sides to bevel the shoulder 1 x 5 (6) p., then in every 2 r. – 3 x 4 (5) sts, and in each decrease, knit 1 x 2 sts together for seating before closing the loops. Simultaneously with the 1st decrease for the shoulder bevel, close off the middle 15 stitches for the neckline and finish both sides separately. To round, close from the inner edge in every 2nd r. 1 x 3, 1 x 2 and 1 x 1 p. After 65.5 cm = 184 r. (68.5 cm = 192 rubles) from the bar, all stitches must be closed.
knitting a jacket
Left shelf: cast on 40 (44) sts and knit 7 cm = 20 r. pattern for the straps, while in the last purl. R. close the first 7 p. = 33 (37) p. Next, knit paths from strands, while in the 1st r. evenly add 7 sts and from the left edge - 1 chrome. = 41 (45) p. After 10.5 cm = 30 r. close from the bar to the next. persons R. knit 24 (26) sts to enter the pocket, then put the sts aside, knit 1 chrome from the transverse thread. and on this and the next 17 (19) p. knit 16.5 cm = 46 r. according to the drawing, while in the last purl. R. added chrome. close the stitch again, knitting it with the previous loop together purlwise, then set the stitch aside. Now include the first 24 (26) stitches in the work, re-cast on 17 (19) stitches for the burlap pocket while working, and knit strand tracks on all 41 (45) stitches = 46 r. tracks with a tourniquet. Next persons R. connect the shelf and burlap pocket trace. in this way: knit 24 (26) stitches according to the pattern, then knit 1 stitch of the front with 1 stitch of the pocket burlap together 17 (19) times, with the pocket burlap behind the work. Next, on 41 (45) sts, knit according to the pattern. I will do the armhole from the right edge as for the back = 29 (33) p. After 60 cm = 168 r. (63 cm = 176) r.) close from the placket from the left edge to cut out the neckline 1 x 5 p., then in every 2nd r. – 2 x 2, 2 x 1 p. and next. 4th r. – 1 x 1 p. At the same time, bevel the shoulder from the right edge as for the back. At the height of the back, all items must be closed.
Right shelf: knit symmetrically.
Sleeves: cast on 36 (40) sts and knit between edges. 25 cm = 70 rub. with an elastic band. After 15.5 cm = 44 r. from the cast-on edge, add 1 x 1 p. on both sides for bevels, then 1 x 1 p. - in every 10th r. and 2 x 1 sts - in every 6th row, including added sts to the pattern = 44 (48) sts. Next, knit paths from strands, while in the 1st row. evenly add 15 sts = 59 (63) sts. After 23 cm = 64 r. close from the elastic on both sides to roll up the sleeves 1 x 3 p., then in every 2nd p. – 1 x 2, 12 x 1, 1 x 2 and 1 x 3 p. After 34.5 cm = 96 r. From the elastic band close the remaining 15 (19) sts.
Hood: on knitting needles No. 7, cast on 7 sts for the left half of the hood and knit. satin stitch For bevels, re-type from the right edge in every 2nd r. 1 x 1, 2 x 2, 2 x 3, 2 x 4, 1 x 5 and 1 x 7 p. = 38 p. After 8.5 cm = 20 r. set aside from the cast-on edge of the stitch. Knit the right half of the hood symmetrically. Then knit both halves of the hood together, in the 1st r. both chrome p. knit in the back middle of the faces together. and mark the resulting p. as medium = 75 p. After 22.5 cm = 54 r. From the back middle, knit 2 stitches together in front of the middle loop. and after the middle stitch, perform 1 stretch (= remove 1 stitch as knit, 1 knit and pull it through the removed stitch). Repeat such decreases 6 more times in every 2nd r., then 6 times in each r., knitting in purl. R. before the middle loop, 2 stitches together, purl. cross. and after the middle p. - 2 p. together. = 49 p. Then next. persons R. Close the middle st and finish both sides separately. To round, close from the inner edge to the next. 2nd r. 1 x 3 p. After 32.5 cm = 78 r. from the back middle or after 41 cm = 98 r. From the cast-on edge, connect the remaining 21 stitches on each side using a “loop” or purl stitch. Knit each side of the work 1 p. purl. and persons sides of the hood together purl. and close them. Make a seam.
Assembly: on knitting needles No. 6, cast on 36 stitches along the edges of the pocket entrances, knit 1 purl. R. knits., then p. close knits. Sew the short sides of the strips. Complete the side and sew so that a drawstring is formed. On the short sides of the bottom of the jacket, grab the fastener strips. From inside Sew burlap pockets on the sides. For a hood cord 150 cm long, cast on 225 stitches on needles No. 6 and immediately cast them off again. Thread the cord from the faces. sides through knitted fabric at a distance of 2 cm from the beginning of the neckline of the right front, pull it through the drawstring of the hood and bring it back to the faces. side through the knitted fabric at a distance of 2 cm from the edge of the left shelf. For a jacket bottom cord 260 cm long, cast on 390 stitches and immediately close their faces again. Pass the cord through the knitted fabric at a distance of 2 cm from the edge of the right shelf, pull it through the drawstring and bring it back to the faces. side at a distance of 2 cm from the edge of the left shelf. Sew buttons, shoulder seams. Sew the hood into the neck. Along the front edges of the shelves, cast on 110 (116) sts on circular knitting needles from/to the bottom slats and between them along the edge of the hood - 133 sts and on all 353 (365) sts, first knit 1 purl. R. faces., then knit the pattern for the strips. At 5 p.m. pattern for the strips (= faces. r.) make 5 holes for buttons in the strip of the right shelf. way: close off 4 p. and next. R. dial them again. Make the bottom hole at a distance of 4 (5) sts from the edge, the rest - every 12 (13) sts. After 3.5 cm = 10 r. from the beginning of the pattern for the planks, close in the next. persons R. first 72 (78) stitches, knit 209 stitches. and the remaining 72 (78) p. close the faces. For the double hood strap, knit on the remaining 209 sts, starting with 1 purl. R., another 7 R. persons satin stitch and 2 r. garter stitch, in the 1st r. on both sides of the chrome. knit knit 1 from the cross thread. cross. Then 211 p. close the faces. Sew in sleeves. Sew side seams and sleeve seams. Turn the bottom strip of the jacket and the hood strip along the fold line to the wrong side.
Brown jacket
size 38.
To knit a jacket you will need:
1100 g dark brown yarn (50% acrylic, 45% wool, 5% alpaca, 750 m/250 g);
straight knitting needles No. 5;
3 hanging fasteners;
darning needle
Attention! Knit in 2 threads.
Knitting patterns.
Garter stitch: front and back rows - front loops
Elastic band 1/1: alternately 1 knit, 1 purl.
Main pattern: knit with an elastic band of 1/1, shifting the pattern by 1 loop in every 4th row.
Knitting density, garter stitch: 18 stitches and 20 rows = 10 x 10 cm.
KNITTING A JACKET.
Back.
Cast on 90 stitches and knit 7 cm in garter stitch.
Then knit with the main pattern, decreasing on both sides in every 8th row 4 x 1 loop.
After 63 cm from the cast-on edge for the bevels of the armholes, close 1 x 3 loops on both sides and 4 x 1 loops in each 2nd row.
Right shelf.
Cast on 56 stitches and knit 7 cm in garter stitch.
Then knit as follows: 14 loops in garter stitch, 42 loops in the main pattern, decreasing on the left in every 8th row 3 x 1 loop.
63 cm from the cast-on edge, bevel the armhole on the left, as for the back.
77 cm from the cast-on edge for the neckline, cast off 1 x 18 loops on the right and in every 2nd row 2 x 4 loops, 1 x 3 loops and 1 x 2 loops.
After 80 cm from the cast-on edge, set aside the remaining loops.
Left shelf knit symmetrically.
Sleeves.
Cast on 43 stitches and knit 7 cm in garter stitch.
Then knit with the main pattern, adding 7 x 1 loops for sleeve bevels on both sides in every 8th row.
After 53 cm from the cast-on edge for piping the sleeves, close on both sides in every 2nd row 1 x 3 loops and in every 2nd row 6 x 1 loop.
After 60 cm from the cast-on edge, set aside the remaining loops.
Assembly.
Sew shoulder seams; For the hood, cast on 120 stitches along the neckline and knit as follows:
14 loops in garter stitch (according to the pattern of the front panel), 92 loops in the main pattern, 14 loops in garter stitch (according to the pattern of the front panel).
Decrease after 14 bar loops and before 14 bar loops in every 2nd row 12 x 1 loop.
After 25 cm from the beginning of the hood, decrease on both sides of the middle loops in each 2nd row 11 x 1 loop.
After 36 cm from the beginning of the hood, set aside the remaining loops, fold the hood in half and connect the set aside loops with a knitted seam.
Sew in the sleeves, sew side seams and sleeve seams.
Sew fasteners (see photo).
Pattern.
Long jacket with a hood.
Long jacket with hood
Size: 40
You will need: 1700 g of nut-colored yarn MONPJAl MERINO MAXl (50% merino wool. 50% acrylic, 6Q m/100 G), straight and auxiliary needles No. 9,
darning needle
To get a product 1 size larger/smaller than indicated, you need to add/subtract 2 cm (4 stitches along the back, 1 stitch on each front) in width and 2 cm (3 rows) in length.
Purl stitch: persons R. - purl p., out. R. - persons l.
Pearl pattern (even number of loops):
1st row: alternately knit 1, purl 1, then each knit. knit purl and vice versa.
Extended loop:
1st row: remove the loop on the left needle as a purl, without knitting, thread at work;
2nd row: knit a loop purl;
3rd row: repeat rapport from the 1st row. Diamond pattern (22 p.): knit according to pattern 1; 35th R.: repeat rapport 3rd R.; In even rows, knit all stitches according to the pattern.
Braid (16 p.): knit according to pattern 2; 9th r.: repeat rapport from the 1st row; In even rows, knit all stitches according to the pattern. Density knitting. Pearl pattern and purl stitch: 10 p. and 16 r. = 10x10 cm; braid: 16 p. = 11 cm; diamond pattern: 22 p. = 16 cm.
Back: cast on 67 sts and knit 7 p for the placket. pearl pattern and 1 r. purl (only 4 cm). Next knit as follows: 5 p. satin stitch, 1 elongated st., 22 sts with a diamond pattern, 1 elongated st., 1 purl st. satin stitch, 7 p. pearl pattern, 1 p. purl. satin stitch, 1 elongated p., 3 p. purl. satin stitch, 16 p. oblique, 9 p. purl. satin stitch After 55 cm from the bevel bar, close the armholes on both sides in every 2nd r. 1 x 4 p. and 2 x 1 p.
After 20 cm from the beginning of the armhole bevels, close 16 outer loops for each shoulder and set aside the middle 22 stitches.
Left shelf: cast on 37 stitches and knit the bar as for the back, but knitting 1 elongated loop on the left. Next knit as follows: 9 sts. satin stitch, 16 p. oblique, 3 p. purl. satin stitch, 1 elongated stitch, 1 purl stitch. satin stitch, b stitch with pearl pattern, 1 elongated stitch. After 55 cm from the bevel bar, close the armhole on the right in every 2nd r. 1 x 4 p. and 2 x 1 p. After 20 cm from the beginning of the armhole bevel, close 16 p. for the shoulder on the right and set aside the remaining 15 p.
Right shelf: cast on 37 sts and knit the placket as for the left front, but knitting 1 elongated loop on the right. Next knit as follows: 1 elongated p., 6 p. with a pearl pattern, 1 p. purl. satin stitch, 1 elongated st., 22 sts with a diamond pattern, 1 elongated st., 5 purl sts. satin stitch After 55 cm from the bevel bar, close the armhole on the left in every 2nd r. 1 x 4 p. and 2 x 1 p. After 20 cm from the beginning of the armhole bevel, close 16 p. on the left and set aside the remaining 15 p.
Left sleeve: cast on 34 sts and knit the bar as for the back. Next knit as follows: 5 p. satin stitch, 1 elongated stitch, 22 stitches with a diamond pattern. 1 elongated p., 5 p. purl. satin stitch Add on both sides every 8th row. 8 x 1 p. and knit the added loops purl. satin stitch After 45 cm from the piping bar, close the sleeves on both sides in every 2nd r. 1 x 4 p., 1 x 2 p., 8 x 1 p. and 1 x 2 l. After 14 cm from the beginning of the sleeve roll, close the remaining 18 sts.
Right sleeve: knit like the left one, but after the bar, knit the loops as follows: 9 sts. satin stitch, 16 p. oblique, 9 p. purl. satin stitch
Assembly: sew shoulder seams. For the hood, transfer the loops placed along the neckline onto the knitting needles and knit as follows: on the loops of the right front, 1 elongated stitch, 6 stitches in a pearl pattern, 1 purl stitch. stitch, 1 elongated stitch, add 3 stitches between the next 6 stitches of the front and 3 stitches between the first 6 stitches of the back and knit the resulting 18 stitches purl. satin stitch; knit the next 11 stitches according to the pattern; add 3 sts between the next 6 sts of the back and 3 sts between the first 6 sts of the left front and knit the resulting 18 sts. satin stitch, then 1 elongated stitch, 1 purl stitch. satin stitch, b p. with a pearl pattern, 1 elongated p. After 19 cm from the beginning of the hood, decrease 9 p. on both sides from the middle ones. 1 x 1 p., knit 14 r. and reduce every 2nd r. 8 x 1 p. (on the wrong side on the right, 2 p. together, twisted, on the left, 2 p. together, purl). After 38 cm from the beginning of the hood, close off the remaining 47 sts.
Fold the hood in half and sew the corresponding loops together last row. Sew side seams, sleeve seams and sew in sleeves. Make 2 hinged stitches along the edge of the right shelf: for the 1st, insert the hook into the outer loop at the base of the hood, fasten the thread 1 connection. p., tie a chain of 8 air. p. and secure it with 1 connection. Art. in the outer loop of the shelf for 5 rubles. below; cut and fasten the thread. Perform the 2nd mounted step, I retreating 14 p. down from 1st. Sew buttons.
White jacket with hood
SIZES 36–42
YOU WILL NEED 350 g white GALIA yarn (50% merino wool, 50% polyamide, 50 m/50 g), 200 g TEBE ecru yarn (100% Extrafine merino wool, 140 m/50 g), 160 g white CAMELOT yarn ( 67% Superkid mohair, 3% wool, 30% polyamide, 500 m/50 g), size 4, size 5 and size 8 knitting needles, 5 buttons, 3cm diameter
Attention! To obtain a mixed yarn, combine 1 TEBE thread and 2 CAMELOT threads.
Pattern 1: knit according to pattern 1.
Pattern 2: knit according to pattern 2.
Knitting density. Pattern 1, knitting needles No. 5: 24 sts x 20 r. = 10 x 10 cm; pattern 2: 26 p. x 28 r. = 10 x 10 cm; purl stitch, knitting needles No. 8: 13 sts x 15 r. = 10 x 10 cm.
Back: on knitting needles No. 4 with an Italian set of mixed yarn, cast on 82 sts, knit 10 cm (= 26 r.) with a 2/2 rib. Switch to needles No. 8, evenly decreasing 16 sts (= 66 sts), knit with GALIA yarn in purl stitch. After 25 cm (= 38 r.) from the elastic band, close 1 x 3 p. for the armholes on both sides, then in every 2 r. 4 x 1 p. (= 52 p.). After 15 cm (= 23 r.) from the beginning of the armhole, close the middle 12 sts for the neckline and finish both sides separately. To round, close from the inside in every 2nd r. 1 x 3 p., 2 x 2 p. After 20 cm (= 30 r.) from the beginning of the armhole, close the remaining 13 p.
Left shelf: on knitting needles No. 4 with an Italian set of mixed yarn, cast on 40 sts, knit 10 cm (= 26 r.) with a 2/2 rib. Switch to needles No. 8, evenly decreasing 10 sts (= 30 sts), knit with GALIA yarn in purl stitch. After 25 cm (= 38 rubles) from the elastic, make an armhole, as on the back. After 10 cm (= 15 r.) from the beginning of the armhole for the neckline, close in every 2nd r. 3 x 2 p., 4 x 1 p. After 20 cm (= 30 r.) from the beginning of the armhole, close the remaining 13 p.
Right shelf: knit symmetrically.
Sleeves: on knitting needles No. 4 with an Italian cast-on, cast on 38 sts, knit 10 cm (= 26 r.) with 2/2 rib. Switch to needles No. 5, evenly adding 16 sts (= 54 sts), knit with pattern 1, adding sleeves on both sides for bevels in every 8th r. 9 x 1 p. (= 72 p.). After 38 cm (= 80 r.) from the elastic band for the edging, close the sleeves on both sides with 1 x 5 sts, then in every 2 r. 10 x 1 p., 2 x 2 p., 2 x 3 p. After 52 cm = 110 r. Close off the remaining 22 sts from the elastic.
Assembly: for the bar on knitting needles No. 4 with an Italian set of mixed yarn, cast on 13 sts, switch to knitting needles No. 5, knit with pattern 2. After 131 cm (= 328 r.) on the middle 3 sts, make a hole for the button, the next 4 holes - with an interval of 10 cm (= 28 rubles). After 174 cm (= 450 r.), close all loops. Sew the strip first to the left shelf, leaving 84 cm of strip free for the hood, then sew the strip to the right shelf.
For the hood, cast on 108 stitches using knitting needles No. 8 using GALIA yarn, purl stitch, decreasing on both sides every 4th row. 8 x 1 p. At the same time, after 10 cm = (16 r.) from the beginning of knitting, distribute the loops as follows: 47 p. purl stitch, knit 2 p. together knit., 2 p., knit 2 p. together knit., 47 p. purl stitch. Continue, decreasing on both sides from the middle 2 sts in every 2nd r. 5 x 1 p., 2 x 2 p. Sew shoulder seams. Sew the hood to the neckline. Sew in the sleeves, sew side seams and sleeve seams. Sew buttons. 
Openwork jacket with hood
White jacket with hood
The men's jacket with a zipper is knitted from LANG YARNS MERINO + yarn, consisting of extra-fine merino wool.
You will need 1000 (1050, 1100, 1150) grams of yarn or 20 (21, 22, 23) skeins of anthracite shade, knitting needles No. 4,5 and 5; zipper with two sliders 60 cm long.
Men's jacket sizes: S (M, L, XL).
Chest circumference: 94 (104, 112, 122) cm, length 70 cm.
Pattern I, needles No. 4.5: 1 edge, *1 purl, 2 knits, 1 purl*, repeat from * to * finish with 1 edge. In subsequent rows, knit loops according to the pattern (= purl 2, knit 2).
Pattern II, needles No. 5 (vertical stripes): knit according to the Chart. The diagram shows the front and back rows. Repeat rows 1 – 22.
Pattern III, knitting needles No. 5 (Braid on 8 loops): knit according to the Chart. The diagram shows the front and back rows. Repeat rows 1 – 44.
Pattern IV, knitting needles No. 5 (Braid on 12 loops): knit according to the Chart. The diagram shows the front and back rows. Repeat rows 1 – 22.
Pattern V, needles No. 5 (Semi-patent - odd number of loops):
Row 1: 1 edge, *1 purl, 1 knit*, repeat from * to *, finish with 1 purl, 1 edge.
Row 2: 1 edge stitch,*1 patent stitch (1 knitting needle at the same time enter 1 row below), 1 purl*, repeat from * to *, finish with 1 patent loop, 1 edge stitch. Repeat rows 1 + 2.
Note: at the last crossing of the braid, before decreasing, decrease the added loops again.
Knitting density of a men's jacket: Pattern I – III, knitting needles No. 5: 19 loops per 26 rows corresponds to 10 cm by 10 cm; Pattern V, knitting needles No. 5: 18 stitches per 40 rows corresponds to 10 cm by 10 cm.
Description of knitting a men's jacket with a zipper.
Back: cast on 96 (106, 114, 124) stitches and knit with Pattern I.
At a height of 5 cm from the cast-on edge, continue knitting with needles No. 5, distributing the patterns as follows: 1 edge, 5 (10, 10, 15) loops. Pattern II, 8 loops of Pattern III, 5 loops of Pattern II, 24 loops of Pattern IV, 5 loops of Pattern II, 0 (0, 8, 8) loops of Pattern III, 5 loops of Pattern II, 24 loops of Pattern IV, 5 loops of Pattern II, 8 loops of Pattern III, 5 (10, 10, 15) loops of Pattern II, 1 edge stitch.
Armhole: at a height of 44 (43, 42, 40) cm from the cast-on edge (measure by weight), close on both sides 1 (1, 1, 2) times 2 loops and decrease 3 (8, 8, 11) times 1 loop, 86 (86, 94, 94) loops in total.
Shoulder bevel: at shoulder height 24 (25, 26, 28) cm, close on both sides 1 time 6 loops + 3 times 7 loops, 1 time 6 loops + 3 times 7 loops, 3 times 7 loops + 1 time 8 loops, 3 7 times + 1 time 8 loops.
Neckline: simultaneously with the beginning of decreases for the shoulder bevel, bind off the middle 26 (26, 30, 30) loops and on both sides in every second row 1 time 2 loops and 1 time 1 loop.
Left front: cast on 49 (54, 59, 64) stitches and knit with Pattern I.
At a height of 5 cm from the cast-on edge, continue knitting with needles No. 5, distributing the patterns as follows: 1 edge, 5 (10, 10, 15) loops of Pattern II, 8 loops of Pattern III, 5 loops of Pattern II, 24 loops of Pattern IV, 5 ( 5, 10, 10) loops of Pattern II, 1 edge.
I will make the armhole and bevel the shoulder along the right edge at the same height and in the same way as on the back. 
Neckline: at a height of 61 cm from the cast-on edge along the left edge, bind off 7 (7, 9, 9) loops 1 time, 3 (3, 4, 4) loops 1 time, 2 loops 1 time and decrease 1 loop 5 times.
Right front: knit symmetrically to the left front, distributing patterns as follows: 1 edge, 5 (5, 10, 10) loops of Pattern II, 24 loops of Pattern IV, 5 loops of Pattern II, 8 loops of Pattern III, 5 (10, 10, 15 ) loops of Pattern II, 1 edge.
Sleeve: cast on 41 (45, 47, 53) loops and knit in Pattern V. For a side bevel, add 1 loop on both sides in every 14th row 13 times, for a total of 67 (71, 73, 79) loops. 
At a height of 49 cm from the cast-on edge, bind off on both sides in every second row 1 (1, 1, 2) times 2 loops, then decrease alternately in every 2nd + 4th row 18 (18, 19, 19) times 1 loop and close in every 2nd row 4 (4, 5, 5) times 1 loop, 1 time 2 loops and 1 time 3 loops.
At a height of 17 (17, 18, 18) cm, bind off the remaining loops.
Hood: Using size 5 needles, cast on 122 (122, 132, 132) stitches and knit with Pattern IV.
At a height of 20 (20, 23, 23) cm from the cast-on edge, close on both sides in every second row 4 times 12 loops, 4 times 12 loops, 1 time 14 loops + 3 times 13 loops, 1 time 14 loops + 3 times 13 loops
At a height of 48 (48, 53, 53) cm from the cast-on edge, bind off the remaining 26 stitches.
Assembly: sew seams. Sew the seam of the hood and sew it into the neckline.
Along the edge of the shelves and the edge of the hood, cast on about 340 (350) loops (edges of the shelves 110 loops each, edge of the hood 120 (130) loops).
Knit the next purl row with all knit stitches, then bind off all stitches.
Knit the zipper strips on 4 loops. Sew on a zipper. Sew in sleeves.