Starting to weave with beads is quite simple. With its help you can create a unique little thing. Usually, beaded hearts are prepared for Valentine's Day. But they are also suitable for themed holidays as a souvenir and a romantic gift.

Heart keychain

The beaded keychain is made from a three-dimensional heart; to make it you will need:

• large beads;
• fishing line;
• connection ring;
• large ring for keychain.

Schemes with descriptions are presented below.

For the first row, a chain is created using the “cross” weaving method. 4 crosses are made and the fifth one is made without one bead. The line is pulled out to the side.

The bead is put on the fishing line on one side. The second edge of the fishing line is threaded through the beads in the bottom row. In the figure, this is point A. This is how the second row turns out.

Thus we make the third row. When finished, the line is drawn into a bead (point C in the figure).

The bottom picture shows the return to mark C.

Let's start the fourth row from this point. It consists of three crosses, and the fishing line is displayed at mark D.

The fifth row is knitted from an incomplete link, as shown in the figure below.

For a voluminous keychain, you need to weave the second part using the method described above.

The two parts of the heart are stacked on top of each other and intertwined with fishing line as follows. The bead is put on a fishing line, the edge of the fishing line is threaded to the point marked in red in the figure.

The second bead is strung on a fishing line and laid in a cross on the other side. Two parts with the addition of beads are sewn along the orange dots.

The keychain is almost ready, all that remains is to secure the fishing line and attach the rings.

Heart earrings

To make earrings you will need:

• fishing line;
• elongated and round beads;
• needle;
• scissors;
• two small rings;
• fastenings for earrings.

This version of heart weaving is suitable for beginners.

A fishing line 60 cm long is cut. One end is secured in a knot. The elongated beads are strung on a fishing line in a circle. As a result, the beads take the shape of a flower. Next, the fishing line is pulled out behind the flower along the inside through a bead. 4 elongated beads and 1 round bead are strung on it. Holes are woven in a circle through the inner edge of the fishing line. Then the fishing line is pulled back through the round bead. An elongated bead is strung on a fishing line and brought out to the other side. To obtain the second circle, 7 more beads are added.

Round beads are inserted between the elongated ones to support the shape of the heart, in a circle. We thread a fishing line through the outer edges and string round beads between 2 elongated ones. The first heart is woven, for the second earring another one is made in exactly the same way.

A small ring is attached at the top, the same is done with the second part. The earring mounts are added to the rings and the earrings are complete.

Heart pendant

To make a heart-shaped pendant you need:

• fishing line;
• small beads;
• needle;
• scissors.

This pendant is woven using the brick weaving method.

The fishing line is cut (size 50-60 cm) and inserted into the needle. Three beads are put on it, the needle is passed back through two and the thread is tightened.

Next, we put on two beads, thread the needle under the fishing line between the two beads of the triangle and pull through the last strung bead. And again we do the same with another bead. In total, you should get two bricks of 1 and 2 beads. This is how a triangle of 3 lines of beads turned out.

To expand the next row, a brick of 2 beads is made in the first loop, and one in the last loop.

Another row is made. It should have six beads.

The upper part of the pendant is woven as follows. Five beads are taken, passed through one loop of the row, then the fishing line is passed through the third from the edge and tightened. If everything is done correctly, the beads should refract beautifully at the exit. We pass the fishing line through the next bead of the top row.

We repeat the same with five more beads. The fishing line needs to be tightened so that there is no strong tension and secured.

To ensure that there are no visible gaps in the decoration and it looks uniform, you need to add beads. The fishing line is threaded from the bottom up into the bead located in the middle of the loop and pulled out. The bead is put on again and threaded in the opposite direction.

We transfer the fishing line to the section of the next weaving. The needle is pulled up and down through the beads, which are separated from the 2nd loop. Then the second loop is filled, and the thread is passed along all edges of the product and tightened.

A wonderful souvenir in the shape of a beaded heart can be made for Valentine's Day or for any special occasion. Moreover, this does not require any special skills or abilities. You just need to want to make a unique thing for your loved one, be patient and follow the master class step by step prepared by hand-made master Marina Anferova. The heart weaving pattern is attached.

How to weave a small volumetric heart from beads

To make a volumetric heart we will need:

• large Czech beads,
• wire with a diameter of 0.3mm,
• large beads,
• pliers.

Before starting work, let's get acquainted with the diagram of the heart. We will weave a heart using the “monastery cross-stitch” technique.

Take a piece of wire about 120 cm long and fold it in half. We put one bead on each side and lower them down. We thread the next bead through the ends of the wire on both sides and tighten it tightly so that our structure is tight. As a result, we get a triangle like this.

Then we put one bead on each side, and thread the third bead with the ends of the wire on both sides and also tighten it. We have a full-fledged cross of four beads.

Let's repeat this action up to the 8th step.

Then we make a spread for the second part of our heart. Why, on the wire on the right, we put two beads, and on the left only one. And we thread this one through both ends of the wire on both sides.

Following the pattern, we will weave 7 regular crosses until the row is completed. To obtain an unfinished cross in the last link, you need to put two beads on the wire on the right, and then thread the last one with the ends of the wire on both sides.

On the 16th step we make an addition, for this we put two beads on the wire on the right, and one on the left, which we pass through both ends of the wire on both sides, thus turning to the left.

We continue to weave crosses, but on the left side we will use the existing beads of the first row in weaving. We weave 7 steps and make a U-turn to the top, for which we thread the wire into two beads at once from the left and take one new one, which we thread with both ends of the wire on both sides.

Thus, we continue to weave according to the pattern until the 39th step. Next, we make a decrease, for which, when turning to the left, on the wire on the right, we string two beads, the last of them is threaded on both sides with the two ends of the wire.

We weave to the end of the row, making an inferior cross from three beads. We secure the wire with pliers and remove the excess ends.

You need to weave two such hearts.

After the two hearts are ready, we connect them with a cross around the perimeter. To do this, we take a separate piece of wire about 60 cm long and connect all the protruding beads with a cross.

This is a decoration for brave and experienced lovers of bead weaving.

What you need for weaving:

- faceted beads or glass beads66 pcs.
- beads to match the color of beads or bugles 132 pcs.
— fishing line 1.6 m long

Weaving pattern:

1. Place 1 bead, 1 bead, 1 bead, 1 bead, 1 bead, 1 bead on the fishing line and close it into a ring, passing through the first 4 strung beads and seed beads. Weaving is done with two ends of the fishing line, each of which is marked with a different color (blue and red).

2. Pick up 1 bead, 1 bead, 1 bead, 1 bead, 1 bead and wrap it to the previous ring, passing through the outermost bead of this ring. This way you should have 2 rings in the shape of a figure eight. The side beads of each ring are common and are the trailer of the rings together.

3. Pass the end of the fishing line through the first bead of the second ring, repeat step 2 and so on until you get a flower chain of 8 rings (Fig. 1). Tighten the center of the chain, passing the fishing line through all the beads in the center and tighten the fishing line (this moment is indicated by a blue arrow in the diagram).

4 . Pass the end of the fishing line through the beads to the edge of the weave, as shown in the diagram, and make a braid of three rings (Fig. 2). Tighten the inner beads into the ring again to give shape to our weaving (this point is indicated by a blue arrow in the diagram).

5 . Make 2 more rings and tighten the beads into the ring (Fig. 3, see blue arrow). Thus, you need to braid everything in a circle (Fig. 4-7).

6. Bring the line to the edge of the weave as shown in the diagram. Now fold the finished figurine in half and work along the entire seam, adding beads and alternating beads. Since you came out of a bead, this means you need to cast on the bead first and then the seed bead.

7. Weaving is quite complex, but there is one principle that will help you when working. The entire product consists of identical rings. Some rings are made of 3 beads and 3 beads, and others are made of 6 beads, which must be additionally tightened into the ring, passing through each bead with a fishing line. According to this principle, you need to connect the seam of the heart, starting from which beads follow your path.

Black heart with wings

This beautiful heart can be decorated with a pair of wings!
Now, instead of faceted beads, take glass beads and seed beads. The weaving technique is used similarly to the heart. Follow the diagram carefully.

Required material for wings:

- bugles
— cutting to match the color of bugles
- beads of the same color
— fishing line 1.1 m long

Wing weaving pattern:

Pay attention to fig. 3, at this moment it is necessary to wrap the upper part of the wing as shown by the arrow and continue weaving the second half of the wing so that it turns out voluminous. The diagram shows in color all the necessary weaves.

Scheme for attaching the wing to the heart:

In today's master class with a weaving pattern we offer you volumetric heart made of beads that can be worn as a pendant, phone pendant or keychain. The work will not take much time, but the result will please your loved ones.

Tools and materials Time: 1 hour Difficulty: 4/10

• large beads (or small beads, bicones;
• fishing line for beads;
• bead needle.

Step-by-step weaving instructions

A distinctive feature of this pendant model is that it can be made from both large beads and beads, including bicones. In any version, the heart will look interesting and attractive. Good idea for a keychain or pendant for a holiday.

Step 1: weave the first cross

The weaving method is incredibly simple, it is a cross that has already become familiar to us. This is how it looks schematically.

Step 2: make several rows

This is the style in which we weave several rows.

Step 3: Round the top of the part

As a result, you will get something like this, which resembles a heart in its shape.

It is noteworthy that the workpiece consists of small squares, without curves, and it will not be difficult to repeat it. The only exception is the upper parts of the heart, but this point is clearly visible in the diagram.

Step 4: connecting two parts

You will need two of these blanks in total.

Now we collect them, our voluminous heart. This is also extremely simple to do - we just take flat hearts and sew them along the edge line. Since during the stitching process we use the remaining bicones, the final row for our keychain is formed.

By the way, it is not necessary to use beads or beads of the same size that we used to form both blanks. You can choose a smaller option, this will not spoil the final version at all. Rather, on the contrary, it will make it more interesting and unusual, especially if you choose a material of a different color scheme.

Step 5: Attach the Loop

Now all that’s left to do is attach a beaded loop to our ready-made heart. This way you can painlessly tag the keychain to its rightful place - the keys, on the rearview mirror in the car, or even on the phone. And there is no shame in giving such a product; your friends or acquaintances will appreciate the souvenir.

Such a voluminous heart made of beads will become a good souvenir For dear people. Therefore, share this master class and weaving pattern with your friends, so that they too can please their loved ones with a gift.

You can weave a wonderful heart-shaped gift from beads for Valentine's Day. This does not require any special skills, so even a novice needlewoman can do it. Below is a diagram showing how to do beautiful heart from any high-quality beads, study it carefully before work.

Let's try to weave a beautiful heart from beads with our own hands

To weave a heart you will need to prepare:

• Large Czech beads;
• Wire 0.3 mm;
• Beads 4 mm;
• Round nose pliers.

You will make this heart using the monastic weaving technique.

Take a wire, the length of which will be approximately 120 cm, and fold it in half. String two beads and place them exactly in the middle of the wire, then insert one bead and thread the second end of the wire into it towards the first end of the wire. It will turn out like this:

Then put a bead on each end of the wire, and in the third, thread both ends of the wire towards each other and tighten. The result was a cross made of beads.

Repeat this action according to the pattern until number eight. Here's what happens:

Then make a spread for the second row of your heart. To do this, put 2 beads on the right wire, and 1 on the left, and thread it through both ends of the wire.

According to the pattern, weave seven crosses to the end of the row. To get an unfinished cross in the last link, you need to string two beads on the right wire, and then thread both wires into the last one.

On number 16, make an increase, put two beads on the right wire, and on the left one into which you thread both ends of the wire - you will get a turn to the left.

Continue weaving in the same way, but on the left use the already strung beads from the first row. Weave the next 7 steps and turn upward. To do this, thread the wire into two beads of the previous row at once and take 1 new one, thread both ends of the wire through it.

Weave until the end of the row, then make an incomplete cross of 3 beads. Secure the wire and remove any residue.

Weave the second one in the same way.

When both sides of the heart are ready, connect them with a separate piece of wire equal to 60 cm. Connect all the outer beads.

After finishing the heart a little, fill it with beads for volume, then complete the connection of the heart, secure the wire and hide the ends inside. So the souvenir is ready.

You can also give the heart as a wedding gift or as a decoration if it is made in the form of a pendant. Such jewelry work requires your perseverance and patience. But what happens in the end will please both you and the person to whom you are going to give this gift.

Deeds of our hearts in a simple lesson

If you delve into the very essence of weaving, it will not take much of your time. For this heart you need to purchase:

• Red large beads;
• Beads for any decoration;
• Fishing line;
• Needle.

This photo tutorial is based on the square post weaving technique.

Manufacturing should begin by weaving a column consisting of 15 main cubes, after which weave another column at a right angle, but it is already one element smaller.

After you have made the required number of columns, you can connect them in the shape of a heart. To do this, match the ends of the work and sew them together.

For decoration, use any beads that harmonize in color, attaching them along the edge of the finished heart, between the main beads. As a result, you can get this gift:

DIY heart tree with diagrams and description

What is required for this:

• Blue and white beads;
• Wire (0.7 and 0.3 mm);
• Wire cutters;
• Gypsum;
• Scissors;
• Floss threads;
• Vase-stand;
• Glue.

The diagram of this tree is not complicated. Start by weaving twigs. Measure a 0.3 mm wire 40 cm long, string 5 beads and twist into a loop. Back off 3 mm, make the same loop again, and you need to make nine of them. Then bend this branch in half, the central loop will be the top. Twist the rest in pairs together to form a twig.

Make five of these branches and connect them into one thick branch by wrapping the small branches on 0.7mm wire to make it look like this.

Weave as many lush branches as you see fit. Using thread, wrap the trunk of each lush branch. The shape and bend of the branches is at your discretion. Then proceed to create the second tree. Only this time the branches should be made of white beads. Otherwise, do everything the same as with the previous tree. When all the branches are ready, they need to be wrapped with white thread.