The selection includes charming crochet scarves, patterns and descriptions, as well as photos of models.

Crochet openwork scarf

The size of the scarf is determined according to your wishes.

We will need:

• yarn containing wool, 100g per 400m - 500g;
• hook No. 2.5 or No. 3.

Pattern: done according to the pattern.

Description

We start knitting the scarf from the wide side. To do this, we collect a chain of VPs of the required number. Next we knit the pattern, following the instructions in the diagram. It shows the direction of knitting and where to connect the next row.

Blue scarf with tassels - winter crochet

Dimensions: the scarf has triangular shape, its approximate dimensions are 75cm by 150cm.

We will need:

• yarn containing 100% wool, 100g per 250m – 400g;
• hook No.4 and No.5.

Pattern: alternate 3 double crochets with 1 ch. In this case, we start each row with 4 VP lifting instead of the first double crochet and 1st VP.

Density: on the main crochet pattern No. 5 17p. for 8.5 rub. equal to 10 cm by 10 cm.

Description

• 1st row: in the 1st VP we knit 1 VP, then 3 stitches with a thread, 3 VP, 3 stitches with a thread, 1 VP, 1 stitch with a thread;
• 2p.: 4 VP, 3 SSN under the next. air n., 1 air. n., under the center. arch from VP 3 SSN, 3 VP and 3 SSN (this is the middle of the scarf), 1 VP, 3 SSN under VP after the next. groups from SSN, 1 air. n. and 1 dc in the 4th air. lifting item;
• 3p.: 4 VP, * 3 SSN under the next one. air n., 1 air. p* - from * to * repeat again, under the center. arch from VP 3 SSN, 3 VP and 3 SSN, 1 VP, from * to * repeat twice, 1 SSN in the 3rd VP lift.

When the length of the side edge reaches 110 m and the width of the scarf is 150 cm, we complete the work.

Assembly

We attach the fringe to the corner sides of the scarf. For each brush we prepare 4 pieces of yarn 30cm long. We tie brushes under each VP.

Crochet mohair scarf

Dimensions: the scarf has a triangular shape, its approximate dimensions are 95cm by 160cm.

We will need:

• yarn containing 70% mohair and 30% silk, 25g per 210m – 100g;
• hook No.3.

Pattern: done according to the pattern.

Density: 15p. for 8 r. equal to 10 cm by 10 cm.

Description

We knit the scarf in straight and reverse rows according to the pattern.

We start knitting with a chain of 5 VPs. We close it into a ring with one connection. stlb. Next we knit once with 1p. 8 rubles each We carry out further knitting with increments by analogy. At an altitude of 62 rubles, having finished the 9th row. We complete the knitting patterns.

Scarf with a pattern of openwork rhombuses

Dimensions: 57cm by 174cm.

We will need:

• yarn containing 100% wool, 50g per 167m – 200g;
• hook No.3.

Density: 24 double crochets for 13 r. equal to 10 cm by 10 cm.

Description

Please note: on the left side the increase is carried out according to the scheme, and on the right - in a mirror manner. Having knitted all the rows of pattern A.3, we move on to pattern A.4.

We carry out further increases on both sides according to cx. A.1. After complete execution of cx. A.4, continue knitting according to cx. A.5, repeating the rapport vertically twice. We do further knitting according to cx. A.3, while simultaneously making increases according to cx. A.2.

At this stage we have 3 patterns of vertical squares ready. Next we replace cx. A.3 to diagram A.4. At the same time, we continue to make increases according to cx. A.1. Having knitted a completely vertical rapport cx. A.4, we knit one vertical repeat of pattern A.6.

We do further knitting like this: 1 sc in each sc, * 3 VP, 1 sc in the next one. Dc* - from * to * repeat along the top edge of the scarf. We complete row 1 sc into the last dc. We break the thread and carefully secure the end.

Scarf based on granny squares

Dimensions: without brushes, the product measures approximately 44cm by 100cm.

We will need:

• yarn, 100% wool, 25g per 115m, brown – 25g;
• the same, sand color – 25g;
• the same, yellow – 25g;
• the same pink color – 25g;
• hook No.4.

• rhombus: we start knitting with a chain of 5 VP. We close it in the SS ring. According to pattern A we knit with 1p. 3 rubles, starting each circle. row with 3 VP instead of the first stlb with nak. and complete 1 post with nak., 1 half-post or 1 connection. column;

• half-diamond: we start knitting with a chain of 5 VPs. We close it in the SS ring. According to pattern B we knit with 1p. 3 rubles, starting each circle. row with 3 VP instead of the first stlb with nak. or with 4 VP instead of the first double crochet stitch.

Density: a full diamond measures 11cm x 12.5cm diagonally.

Description

We knit 28 full rhombuses and 8 half-diamonds. The alternating colors of yarn are shown in the photo or you can change it as you wish.

We connect the diamonds together while knitting the last circle. row, tying them to each other. To do this, instead of the VP, we perform the connection. column to the neighboring air. p. If this method of joining seems inconvenient to you, you can first knit all the elements of the scarf, and then, laying them out in accordance with the pattern, connect them together.

Finishing

We attach fringe to the sides of the scarf. For each strand, cut 40cm lengths of yarn into four threads. We tie the strands onto external arches made of air. P.

Openwork scarf with a “Pineapples” pattern

Dimensions: 86cm by 173cm.

We will need:

• yarn containing 73% cotton, 27% nylon, 50g per 171m - 200g;
• hook No. 3.75.

Density: section of the diagram with 1p. 10 rubles each equal to 21.5 cm by 33 cm.

Description

We knit a scarf in rows, starting from the center of the top row. We work according to the given scheme. The pattern repeat on it is highlighted in pink.

We collect 4 VPs, close them in a circular r. conn. column. We knit the pattern according to the diagram, performing from 1p. 9 rubles each Then repeat from 7p. 9 rubles each 12 more times. We complete the work with the last row of the diagram.

The finished scarf must be washed and laid out on a horizontal surface, dried, having previously been fixed to the required size.

Crochet scarf made from large motifs

Dimensions: 125cm by 144cm.

We will need:

• yarn containing alpaca wool, 50g per 22m - 200g;
• hook No.4.

• main motive: performed according to the pattern in circular rows.
  1st row: first, we form a ring of yarn, knit 3 VPs into it instead of the first double crochet. and then - 11 double crochets, completing 1 connection. post in the third VP of lifting. We tighten the original ring of yarn to Ø5mm;
  2 rub. and 3 p.: see the diagram, instead of the first RLS we knit 1 VP, complete 1 SS in the VP of the rise. As necessary when moving to a new circle. row we knit an additional connection. stlb.

We knit all other motifs in the same way as the first, joining them together in the third row. stlb.

The diagram shows six motifs with junctions. We continue knitting the scarf by increasing the number of motifs in each row by one. That. we will get a regular triangle;

Tying: performed in a circular pattern. Each row begins with 1 VP instead of the first sc (see diagram), ends with 1 SS in the lifting VP.

We start with the loops from the arrow, moving on to repetitions of rapport. We knit circular rows a and b once.

Density: the complete motif is approximately Ø10cm; strapping – 2cm.

Description

We make 105 complete motifs and connect them according to the diagram. We tie a scarf, making a central one of 3 posts with two stitches in the corners. between two stems with two yarn overs of a corner flower.

Large scarf made of wool blend yarn

Dimensions: 100cm by 200cm.

We will need:

• half-woolen yarn, 100g per 750m – 600g;
• hook No. 2.5.

Description

The scarf is knitted using three threads of yarn. We start working from the corner and, gradually increasing the size, reach the 28th r. scheme. Then we loosely tie the scarf, performing 1 p. Single crochet. We decorate the scarf with fringe. The length of the brushes is approximately 16cm.

Mohair square scarf

Dimensions: 80cm by 160cm.

We will need:

• yarn containing 75% mohair and 25% silk, 25g per 200m - 50g;
• hook No. 3.5.

Density: one complete motif measures 11cm by 11cm.

Description

For the scarf you need to make 45 full motifs and 10 half ones. Then, arranging them along cx. A.3 sew together. First of all, we sew the parts in horizontal rows, then we fasten the finished strips vertically.

We place two motifs with the wrong sides and knit on both sides from the front side: 1 sc in the corner, * 3 ch, 1 sc in the next. VP* - from * to * repeat until next. corner (we get 5 arches from VP), 3 VP (the gap between two motifs).

We continue the connection as follows. two elements using the same algorithm. Then we sew all the elements in rows along cx. A.3

In the first we will have 9 full motives and one half, in the second - 8 full and one half, in the third - 7 and 1. That is, the number of elements is constantly decreasing by one full square.

The last stage is to sew the stripes of motifs.

Triangular crochet scarf - model with lace

Large crochet scarf Star Rain

Crochet scarf with a spectacular pattern

Crochet openwork scarf

Magic scarf with flowers

Complement to the ideal female image scarves, scarves, and shawls appear. Recently, new items made by hand have become increasingly popular, which is why more and more craftswomen are mastering the process of knitting and weaving: knitting scarves, crocheted scarves and shawls. Beautiful openwork shawl will decorate and complement any look and coordinate an elegant women's style. The openwork collection will always be in trend.

Scarves, scarves, and shawls complement the ideal female look.

Even inexperienced craftswomen can crochet an elegant and light shawl. It is enough to understand the simplest knitting patterns and the work will bring pleasure and an elegant new accessory. For beginner knitters, air patterns and openwork patterns are ideal.

In order to knit a shawl - a scarf simply, stock up on materials in advance:

• 500 grams of yarn: half wool and acrylic;
• hook number 3.

We knit this model from the bottom up, adding patterns as the size of the product increases.

1. I crochet 5 air loops, from them continue knitting according to the pattern.
2. After the border of the product is ready, begin knitting the middle with a fillet mesh.
3. As the number of loops increases to 30, they begin to knit the “pineapple” pattern.
4. The finished product is tied around the perimeter with single crochets.
5. If desired, you can add fringe along the edge of the model.

A beautiful shawl turns out to be openwork and airy; most craftswomen prefer to knit such an accessory in white.

How to crochet a white shawl (video)

How to quickly and easily crochet a scarf

Crocheted scarves are not only unusual, but airy and practical. You can knit this pattern from mohair, or you can dilute it with other yarn.

For a fluffy scarf you will need materials:

• 250 grams of fine yarn with mohair;
• hook number 3.

Crocheted scarves are not only unusual, but airy and practical

The model will turn out successful and even if you follow the description of the sequence of actions step by step and the fact that this triangular model is knitted from the middle of the top.

1. Cast on 8 chain stitches, first knit 5 double crochets, which are connected with arcs of 2 chain stitches.
2. Starting from the 2nd row, knit according to the pattern, after the 7th row, repeat from 5th to 7th rows inclusive, knitting 25 rows in this way. If done correctly, 2 patterns are added to the product every 3 rows.

The finished scarf is tied with single crochets; the bottom can also be decorated with a fringe of yarn.

Easy shawl patterns

Experienced knitters have in their arsenal a set of popular and simple motifs to perform different models knitted shawl.

The simplest and most accessible patterns for a knitted shawl by craftswomen include:

• honeycomb;
• fish;
• peas;
• shells;
• spiders;
• cat paws;
• berries.

Experienced knitters have in their arsenal a set of popular and simple motifs for making different models of knitted shawls

When choosing a knitting pattern, you should take into account what product you are planning and the density of the knitting.

1. If you want to get a tightly repeating pattern, you can use the “honeycomb” pattern, going through the front and back rows using this method.
2. All patterns are made on front rows, purl stitches are knitted with knit stitches.
3. The corners and frames of the product can be filled with a polka dot pattern, so the shawls and stoles will have a perfectly even triangular shape.

You can knit an unusual and at the same time simple shawl by combining several patterns in one product.

Turkish Shawl: Detailed Crochet Instructions

A real masterpiece and the highest mastery of knitting art is the Turkish shawl - this model has recently become increasingly popular. You can knit such a model with a vine pattern, or you can use shells.

In order to make a beautiful and unusual crocheted shawl, you should prepare the following materials:

• 300 grams of fine yarn with lurex;
• Crochet hook.

A real masterpiece and the highest mastery of knitting art is the Turkish shawl

The product based on Turkish motifs is knitted from the bottom edge, gradually expanding towards the top.

1. The product is knitted in circular rows, which is clearly visible in the close-up diagram.
2. The air loops are made long; for this, the thread is pulled out a little longer.
3. The berries are knitted in the same way: in order to make them more convex and larger, the thread is pulled out longer and the elements themselves are made from 7 double crochets.
4. The sides of the product are tied with double crochets; for rises, a size of up to 5 loops is ideal.

It is important to choose the right yarn for such a product. You can use cotton thread, thin lurex thread or light air knitting threads.

How to crochet a shawl from a corner

It is not difficult to quickly crochet a light shawl or cape; the most common method is to knit the product, starting from the corner. The product is of the correct triangular shape, fits perfectly on the shoulders or tied around the head.

This shawl can be knitted from any yarn, choosing a hook based on the quality and thickness of the threads.

1. The first row begins with a set of 4 air loops.
2. Starting from the second row, work according to a 10-row pattern, making sure that the product expands evenly.
3. From the 11th row, knit according to the pattern, starting with the pattern of the 8th row, and repeat knitting until the shawl is the desired size.

A beautiful openwork shawl will be an ideal addition to any outfit and fashion accessory in any season.

Semicircular knitted product

A semicircular or round shawl will add a touch of romanticism to the owner and, moreover, it is not difficult to make such a product.

Patterns for such knitting options include designs with “scales,” “shells,” and “pineapples” also look original. Most craftswomen call this product “monika”; this is the name given to the semicircular shawl, knitted according to Estonian motifs. In order for the product to turn out original and special, you should follow detailed instructions

1. and a description of the knitting sequence.
2. Cast on a chain of 7 air loops and close them into a ring.
3. The first row is knitted with 5 chain stitches, after which the pattern is repeated three times and the row is closed with a double crochet.
4. Cast on 3 chain stitches, then knit the pattern 4 times according to the pattern, finishing with a double crochet.

Knit according to the pattern up to 78 rows, close the loops, tie the product with single crochets. Shawl models, crocheted

A simple bactus shawl from a granny square (video)

Even a novice craftswoman can crochet a unique and unusual product; it is only important to learn to read the diagram and strictly follow the instructions for work. You should also take into account the quality of the threads and the density of knitting, so before work you should try to knit an element of the pattern and correctly calculate the size of the product.

Finding the perfect knitted scarf that accentuates your beauty and matches your main outfit can be a very difficult task. The variety of yarn and its colors is sometimes stunning. First you need to decide what kind of scarf you need - warm or light, openwork. This will determine the composition of the yarn used in production. Another important point is the size of the scarf, because they can be from small to huge, covering not only the head, but also the shoulders. In principle, the most the right option There will be a decision to crochet a scarf with your own hands. In this case, you will be able to realize your fantasies to the fullest and end up with not only a beautiful, but also an exclusive item.

Crochet mohair scarf

Dimensions: the scarf has a triangular shape, its approximate dimensions are 95cm by 160cm.

We will need:

• yarn containing 70% mohair and 30% silk, 25g per 210m – 100g;
• hook No.3.

Pattern: done according to the pattern.

Density: 15p. for 8 r. equal to 10 cm by 10 cm.

Description

We knit the scarf in straight and reverse rows according to the pattern.

We start knitting with a chain of 5 VPs. We close it into a ring with one connection. stlb. Next we knit once with 1p. 8 rubles each We carry out further knitting with increments by analogy. At an altitude of 62 rubles, having finished the 9th row. We complete the knitting patterns.

Blue scarf with tassels

Dimensions: the scarf has a triangular shape, its approximate dimensions are 75cm by 150cm.

We will need:

• yarn containing 100% wool, 100g per 250m – 400g;
• hook No.4 and No.5.

Pattern: alternate 3 double crochets with 1 ch. In this case, we start each row with 4 VP lifting instead of the first double crochet and 1st VP.

Density: on the main crochet pattern No. 5 17p. for 8.5 rub. equal to 10 cm by 10 cm.

Description

• 1st row: in the 1st VP we knit 1 VP, then 3 stitches with a thread, 3 VP, 3 stitches with a thread, 1 VP, 1 stitch with a thread;
• 2p.: 4 VP, 3 SSN under the next. air n., 1 air. n., under the center. arch from VP 3 SSN, 3 VP and 3 SSN (this is the middle of the scarf), 1 VP, 3 SSN under VP after the next. groups from SSN, 1 air. n. and 1 dc in the 4th air. lifting item;
• 3p.: 4 VP, * 3 SSN under the next one. air n., 1 air. p* - from * to * repeat again, under the center. arch from VP 3 SSN, 3 VP and 3 SSN, 1 VP, from * to * repeat twice, 1 SSN in the 3rd VP lift.

When the length of the side edge reaches 110 m and the width of the scarf is 150 cm, we complete the work.

Assembly

We attach the fringe to the corner sides of the scarf. For each brush we prepare 4 pieces of yarn 30cm long. We tie brushes under each VP.

Openwork scarf

The size of the scarf is determined according to your wishes.

We will need:

• yarn containing wool, 100g per 400m - 500g;
• hook No. 2.5 or No. 3.

Pattern: done according to the pattern.

Description

We start knitting the scarf from the wide side. To do this, we collect a chain of VPs of the required number. Next we knit the pattern, following the instructions in the diagram. It shows the direction of knitting and where to connect the next row.

Scarf with a pattern of openwork rhombuses

Dimensions: 57cm by 174cm.

We will need:

• yarn containing 100% wool, 50g per 167m – 200g;
• hook No.3.

Density: 24 double crochets for 13 r. equal to 10 cm by 10 cm.

Description

Please note: on the left side the increase is carried out according to the scheme, and on the right - in a mirror manner. Having knitted all the rows of pattern A.3, we move on to pattern A.4.

We carry out further increases on both sides according to cx. A.1. After complete execution of cx. A.4, continue knitting according to cx. A.5, repeating the rapport vertically twice. We do further knitting according to cx. A.3, while simultaneously making increases according to cx. A.2.

At this stage we have 3 patterns of vertical squares ready. Next we replace cx. A.3 to diagram A.4. At the same time, we continue to make increases according to cx. A.1. Having knitted a completely vertical rapport cx. A.4, we knit one vertical repeat of pattern A.6.

We do further knitting like this: 1 sc in each sc, * 3 VP, 1 sc in the next one. Dc* - from * to * repeat along the top edge of the scarf. We complete row 1 sc into the last dc. We break the thread and carefully secure the end.

Scarf based on granny squares

Dimensions: without brushes, the product measures approximately 44cm by 100cm.

We will need:

• yarn, 100% wool, 25g per 115m, brown – 25g;
• the same, sand color – 25g;
• the same, yellow – 25g;
• the same pink color – 25g;
• hook No.4.

• rhombus: we start knitting with a chain of 5 VP. We close it in the SS ring. According to pattern A we knit with 1p. 3 rubles, starting each circle. row with 3 VP instead of the first stlb with nak. and complete 1 post with nak., 1 half-post or 1 connection. column;

• half-diamond: we start knitting with a chain of 5 VPs. We close it in the SS ring. According to pattern B we knit with 1p. 3 rubles, starting each circle. row with 3 VP instead of the first stlb with nak. or with 4 VP instead of the first double crochet stitch.

Density: a full diamond measures 11cm x 12.5cm diagonally.

Description

We knit 28 full rhombuses and 8 half-diamonds. The alternating colors of yarn are shown in the photo or you can change it as you wish.

We connect the diamonds together while knitting the last circle. row, tying them to each other. To do this, instead of the VP, we perform the connection. column to the neighboring air. p. If this method of joining seems inconvenient to you, you can first knit all the elements of the scarf, and then, laying them out in accordance with the pattern, connect them together.

Finishing

We attach fringe to the sides of the scarf. For each strand, cut 40cm lengths of yarn into four threads. We tie the strands onto external arches made of air. P.

Openwork scarf with a “Pineapples” pattern

Dimensions: 86cm by 173cm.

We will need:

• yarn containing 73% cotton, 27% nylon, 50g per 171m - 200g;
• hook No. 3.75.

Density: section of the diagram with 1p. 10 rubles each equal to 21.5 cm by 33 cm.

Description

We knit a scarf in rows, starting from the center of the top row. We work according to the given scheme. The pattern repeat on it is highlighted in pink.

We collect 4 VPs, close them in a circular r. conn. column. We knit the pattern according to the diagram, performing from 1p. 9 rubles each Then repeat from 7p. 9 rubles each 12 more times. We complete the work with the last row of the diagram.

The finished scarf must be washed and laid out on a horizontal surface, dried, having previously been fixed to the required size.

Large motif scarf

Dimensions: 125cm by 144cm.

We will need:

• yarn containing alpaca wool, 50g per 22m - 200g;
• hook No.4.

• main motive: performed according to the pattern in circular rows.
  1st row: first, we form a ring of yarn, knit 3 VPs into it instead of the first double crochet. and then - 11 double crochets, completing 1 connection. post in the third VP of lifting. We tighten the original ring of yarn to Ø5mm;
  2 rub. and 3 p.: see the diagram, instead of the first RLS we knit 1 VP, complete 1 SS in the VP of the rise. As necessary when moving to a new circle. row we knit an additional connection. stlb.

We knit all other motifs in the same way as the first, joining them together in the third row. stlb.

The diagram shows six motifs with junctions. We continue knitting the scarf by increasing the number of motifs in each row by one. That. we will get a regular triangle;

Tying: performed in a circular pattern. Each row begins with 1 VP instead of the first sc (see diagram), ends with 1 SS in the lifting VP.

We start with the loops from the arrow, moving on to repetitions of rapport. We knit circular rows a and b once.

Density: the complete motif is approximately Ø10cm; strapping – 2cm.

Description

We make 105 complete motifs and connect them according to the diagram. We tie a scarf, making a central one of 3 posts with two stitches in the corners. between two stems with two yarn overs of a corner flower.

Large scarf made of wool blend yarn

Dimensions: 100cm by 200cm.

We will need:

• half-woolen yarn, 100g per 750m – 600g;
• hook No. 2.5.

Description

The scarf is knitted using three threads of yarn. We start working from the corner and, gradually increasing the size, reach the 28th r. scheme. Then we loosely tie the scarf, performing 1 p. Single crochet. We decorate the scarf with fringe. The length of the brushes is approximately 16cm.

Mohair square scarf

Dimensions: 80cm by 160cm.

We will need:

• yarn containing 75% mohair and 25% silk, 25g per 200m - 50g;
• hook No. 3.5.

Density: one complete motif measures 11cm by 11cm.

Description

For the scarf you need to make 45 full motifs and 10 half ones. Then, arranging them along cx. A.3 sew together. First of all, we sew the parts in horizontal rows, then we fasten the finished strips vertically.

We place two motifs with the wrong sides and knit on both sides from the front side: 1 sc in the corner, * 3 ch, 1 sc in the next. VP* - from * to * repeat until next. corner (we get 5 arches from VP), 3 VP (the gap between two motifs).

We continue the connection as follows. two elements using the same algorithm. Then we sew all the elements in rows along cx. A.3

In the first we will have 9 full motives and one half, in the second - 8 full and one half, in the third - 7 and 1. That is, the number of elements is constantly decreasing by one full square.

The last stage is to sew the stripes of motifs.

More options for crocheting scarves

Finding the perfect knitted scarf that accentuates your beauty and matches your main outfit can be a very difficult task. The variety of yarn and its colors is sometimes stunning. First you need to decide what kind of scarf you need - warm or light, openwork. This will determine the composition of the yarn used in production. Another important point is the size of the scarf, because they can be from small to huge, covering not only the head, but also the shoulders. In principle, the most correct option would be to crochet a scarf with your own hands. In this case, you will be able to realize your fantasies to the fullest and end up with not only a beautiful, but also an exclusive item.

Crochet mohair scarf

Dimensions: the scarf has a triangular shape, its approximate dimensions are 95cm by 160cm.

We will need:

• yarn containing 70% mohair and 30% silk, 25g per 210m – 100g;
• hook No.3.

Pattern: done according to the pattern.

Density: 15p. for 8 r. equal to 10 cm by 10 cm.

Description

We knit the scarf in straight and reverse rows according to the pattern.

We start knitting with a chain of 5 VPs. We close it into a ring with one connection. stlb. Next we knit once with 1p. 8 rubles each We carry out further knitting with increments by analogy. At an altitude of 62 rubles, having finished the 9th row. We complete the knitting patterns.

Crochet lace scarf: video MK

Blue scarf with tassels

Dimensions: the scarf has a triangular shape, its approximate dimensions are 75cm by 150cm.

We will need:

• yarn containing 100% wool, 100g per 250m – 400g;
• hook No.4 and No.5.

Pattern: alternate 3 double crochets with 1 ch. In this case, we start each row with 4 VP lifting instead of the first double crochet and 1st VP.

Density: on the main crochet pattern No. 5 17p. for 8.5 rub. equal to 10 cm by 10 cm.

Description

• 1st row: in the 1st VP we knit 1 VP, then 3 stitches with a thread, 3 VP, 3 stitches with a thread, 1 VP, 1 stitch with a thread;
• 2p.: 4 VP, 3 SSN under the next. air n., 1 air. n., under the center. arch from VP 3 SSN, 3 VP and 3 SSN (this is the middle of the scarf), 1 VP, 3 SSN under VP after the next. groups from SSN, 1 air. n. and 1 dc in the 4th air. lifting item;
• 3p.: 4 VP, * 3 SSN under the next one. air n., 1 air. p* – from * to * repeat again, under the center. arch from VP 3 SSN, 3 VP and 3 SSN, 1 VP, from * to * repeat twice, 1 SSN in the 3rd VP lift.

When the length of the side edge reaches 110 m and the width of the scarf is 150 cm, we complete the work.

Assembly

We attach the fringe to the corner sides of the scarf. For each brush we prepare 4 pieces of yarn 30cm long. We tie brushes under each VP.

Small pineapple scarf: video master class

Openwork scarf

The size of the scarf is determined according to your wishes.

We will need:

• yarn containing wool, 100g per 400m - 500g;
• hook No. 2.5 or No. 3.

Pattern: done according to the pattern.

Description

We start knitting the scarf from the wide side. To do this, we collect a chain of VPs of the required number. Next we knit the pattern, following the instructions in the diagram. It shows the direction of knitting and where to connect the next row.

Burgundy crochet cape scarf: MK video

Scarf with a pattern of openwork rhombuses

Dimensions: 57cm by 174cm.

We will need:

• yarn containing 100% wool, 50g per 167m – 200g;
• hook No.3.

Density: 24 double crochets for 13 r. equal to 10 cm by 10 cm.

Description

Dimensions: without brushes, the product measures approximately 44cm by 100cm.

We will need:

• yarn, 100% wool, 25g per 115m, brown – 25g;
• the same, sand color – 25g;
• the same, yellow – 25g;
• the same pink color – 25g;
• hook No.4.

Patterns:

• rhombus: we start knitting with a chain of 5 VP. We close it in the SS ring. According to pattern A we knit with 1p. 3 rubles, starting each circle. row with 3 VP instead of the first stlb with nak. and complete 1 post with nak., 1 half-post or 1 connection. column;

• half-diamond: we start knitting with a chain of 5 VPs. We close it in the SS ring. According to pattern B we knit with 1p. 3 rubles, starting each circle. row with 3 VP instead of the first stlb with nak. or with 4 VP instead of the first double crochet stitch.

Density: a full diamond measures 11cm x 12.5cm diagonally.

Description

We knit 28 full rhombuses and 8 half-diamonds. The alternating colors of yarn are shown in the photo or you can change it as you wish.

We connect the diamonds together while knitting the last circle. row, tying them to each other. To do this, instead of the VP, we perform the connection. column to the neighboring air. p. If this method of joining seems inconvenient to you, you can first knit all the elements of the scarf, and then, laying them out in accordance with the pattern, connect them together.

Finishing

We attach fringe to the sides of the scarf. For each strand, cut 40cm lengths of yarn into four threads. We tie the strands onto external arches made of air. P.

Crocheted openwork scarf from a round motif: video master class

Openwork scarf with a “Pineapples” pattern

Dimensions: 86cm by 173cm.

We will need:

• yarn containing 73% cotton, 27% nylon, 50g per 171m - 200g;
• hook No. 3.75.

Density: section of the diagram with 1p. 10 rubles each equal to 21.5 cm by 33 cm.

Description

We knit a scarf in rows, starting from the center of the top row. We work according to the given scheme. The pattern repeat on it is highlighted in pink.

We collect 4 VPs, close them in a circular r. conn. column. We knit the pattern according to the diagram, performing from 1p. 9 rubles each Then repeat from 7p. 9 rubles each 12 more times. We complete the work with the last row of the diagram.

The finished scarf must be washed and laid out on a horizontal surface, dried, having previously been fixed to the required size.

Large motif scarf

Dimensions: 125cm by 144cm.

We will need:

• yarn containing alpaca wool, 50g per 22m - 200g;
• hook No.4.

Patterns:

• main motive: performed according to the pattern in circular rows.
  1st row: first, we form a ring of yarn, knit 3 VPs into it instead of the first double crochet. and then - 11 double crochets, completing 1 connection. post in the third VP of lifting. We tighten the original ring of yarn to Ø5mm;
  2 rub. and 3 p.: see the diagram, instead of the first RLS we knit 1 VP, complete 1 SS in the VP of the rise. As necessary when moving to a new circle. row we knit an additional connection. stlb.

We knit all other motifs in the same way as the first, joining them together in the third row. stlb.

The diagram shows six motifs with junctions. We continue knitting the scarf by increasing the number of motifs in each row by one. That. we will get a regular triangle;

Tying: performed in a circular pattern. Each row begins with 1 VP instead of the first sc (see diagram), ends with 1 SS in the lifting VP.

We start with the loops from the arrow, moving on to repetitions of rapport. We knit circular rows a and b once.

Density: the complete motif is approximately Ø10cm; strapping – 2cm.

Description

We make 105 complete motifs and connect them according to the diagram. We tie a scarf, making a central one of 3 posts with two stitches in the corners. between two stems with two yarn overs of a corner flower.

Large scarf made of wool blend yarn

Dimensions: 100cm by 200cm.

We will need:

• half-woolen yarn, 100g per 750m – 600g;
• hook No. 2.5.

Description

The scarf is knitted using three threads of yarn. We start working from the corner and, gradually increasing the size, reach the 28th r. scheme. Then we loosely tie the scarf, performing 1 p. Single crochet. We decorate the scarf with fringe. The length of the brushes is approximately 16cm.

Mohair square scarf

Accessories made from yarn: a cozy soft shawl, an openwork thin bactus, a stylish scarf - are a simple and elegant way to make casual look brighter and more interesting. Do you think knitting scarves is a troublesome and difficult task? Not at all! Detailed descriptions, photos and diagrams of scarves and shawls will allow you to quickly and happily bring any model to life.

What are the benefits of hand knitted items?

Exclusivity. Hand-crafted accessories will help add uniqueness to your look. These cannot be found in fashion boutiques, because in addition to interesting design the creative powers of man himself are invested in them. This gives scarves, shawls, bacti and scarves special charm and beauty.

Functionality. With the help of a scarf it is easy to transform even the most familiar outfit and add a bright accent to an everyday suit or dress. In addition, a warm stole will keep you warm on frosty and windy days, and an elegant shawl will protect you from the midday sun.

Ease of execution. Thanks to diagrams with descriptions and photographs, it is very easy to connect models! Even a novice needlewoman can choose an openwork scarf or stylish stole to your liking and without any problems create a new accessory for your wardrobe. Try it yourself and you won’t be able to tear yourself away from this exciting activity!

Knitting yourself is easy!

If you are thinking about how to knit a scarf and are looking for suitable patterns, you should first decide what you want to use to make the product - crocheted or knitted. Depending on the solution, the features of the technology and the type of finished product will differ. Texture, density, and ornament are determined by the thickness and composition of the yarn.

Cotton threads are perfect for lace scarves, which are more convenient to crochet. Lush stoles with spectacular patterns of stripes or zigzags are made with knitting needles from yarn with the addition of mohair or angora. Shawls and bacti decorate openwork patterns and textured patterns, complex color combinations give the products extraordinary expressiveness, and fashionable fringe adds grace. Even a beginner in the field of knitting will find it easy to make a bright shawl or an openwork scarf for yourself or as a gift to loved ones. Try it!