home Facilities Knit dimensionless footprints with knitting needles. How to knit footwear with knitting needles: step-by-step instructions. We knit footwear with knitting needles with descriptions and patterns for beginners

Knit dimensionless footprints with knitting needles. How to knit footwear with knitting needles: step-by-step instructions. We knit footwear with knitting needles with descriptions and patterns for beginners

Knitted socks - footwear are especially relevant in winter time. They are very comfortable and can successfully replace slippers. Original and even exclusive, these “hand made” slippers sometimes resemble short socks. The choice of model, its complexity, and knitting threads entirely depends on the experience and capabilities of the needlewoman. There are absolutely simple options no stitches for beginner knitters. And if you decide to knit a more complex model, then we will try to help you with this! How to knit footprints with knitting needles step-by-step instruction A master class on several wonderful patterns for adults and children clearly explains all the stages of knitting in detail.

Traces of squares

Sizes: 38-39

We will need:

yarn, consisting of 75% wool, 25% polyamide (150g per 300m) – pink – 100g;
the same, purple – 100g;
knitting needles No. 3.5 and No. 4.

Pattern:

shawl pattern: all loops in all rows. – facial.

Density: in the shawl pattern 21p. equal to 10cm.

The dimensions of one square are 9cm by 9cm.

How to knit traces from squares - master class with description and assembly diagram

We start knitting squares with a set of knitting needles 19p. We knit to a height of 9 cm and close the stitch. We make 8 square blanks of each color for one slipper. A total of 16 pieces for two tracks. each color. We sew the squares according to the instructions in the diagram, alternating colors.

Detailed step-by-step instructions and a master class for beginners will help you knit these interesting house slippers.

We will need:

sour cream yarn of two colors - 100g of each color;
knitting needles - according to the thickness of the yarn.

Patterns:

persons smooth surface: in knits. R. - knit, purl. R. - purl stitches;
Herringbone pattern: perform according to the diagram.

How to knit tracks with the Herringbone pattern - detailed master class with photos

Using knitting needles we cast on 17 stitches. and knit:
1st row: 8p. - handkerchief Fig., 1n., 1l., 1n., 8p. - handkerchief rice.;
2nd row and all even ones: according to the pattern, purl the yarn overs.

Simple model, accessible to beginner craftswomen, is knitted quickly and looks very impressive due to the contrasting stripes. These slippers will successfully replace socks for your child.

Size: for children 2-3 years old.

To knit these slippers we need:

yarn, consisting of 50% wool, 50% acrylic (100g per 200m), chocolate color – 100g;
the same yarn, yellow – 50g;
set of toe knitting needles No. 3;
hook No.3.

Patterns:

shawl pattern: all loops in all rows. – facial;
persons satin stitch: when knitting in the round, knit all stitches in all rows.

Description

We knit with chocolate yarn 40p. and forward/reverse knitting 3p. handkerchief rice. Then 2p. yellow thread, 2p. chocolate, 2 r. yellow. Set aside 30 p. back and side parts, we work only with the next 10p. front We knit with shawl rice, changing color every 2p. We knit 12 stripes (24 rows) and move on to knitting the side sections with chocolate yarn.

We raise 10 stitches along the edges of the strips with chocolate yarn, and take the previously set aside 30 stitches to work. + 10p. toe. In total we have 60p. Having distributed the loops, we continue knitting on 4 knitting needles. Ch. We make 9 rows of chocolate yarn in a circle.

Next we need to knit the soles of the children's slippers. We knit only the central 10 stitches. toe, setting aside the remaining loops. We work in straight/reverse rows, knitting the outer loop of the row and the 1st stitch of the side part in 1L. Using this master class, we knit until all the loops on the side sections are completely knitted, except for 10 stitches. heels. Turn the product inside out and crochet the remaining sts.

We make the top seam. We tie edge 1 with a row of single crochets with yellow yarn.

We quickly knit footwear with knitting needles: video MK

Children's slippers - socks with an openwork pattern

Knitting children's openwork footprints with knitting needles: video master class

Socks – slippers with jacquard pattern

Size: 38

We need:

yarn, consisting of 75% wool, 25% polyamide (100g per 420m) red - 100g;
same yarn white– 100g;
the same green yarn. – 100g;
set of toe knitting needles No. 2.5;
markers (M).

Patterns: Density: jacquard 32p. this is 10cm.

Description

We dial 72p. white thread and knit in the round. smooth surface, setting M at the beginning of the river. between the 1st and 4th spokes. We make 10 rubles.

Track. r.: *2p. in 1l., 1n.* - from * to * on all sts. Then another 3p. persons Next we move on to diagram 1, repeating the rapport from 6 stitches 12 times. We knit the 1st r. diagrams, then three times with 2p. 7 rubles, then 3 rubles. persons white thread.

We turn the edge under, creating a jagged edge. We knit 1 p. knit stitches, connecting the cast-on row and the stitches on the knitting needles. It turns out to be a turn up, a double cuff.

We continue by completing 5 rubles. white knit yarn. Ch. At the same time we decrease 1 p. on the 2nd and 4th sp. Total – 70p. We continue to work only on the 1st and 4th sp., knitting the heel lift. We make straight and reverse rows, in the 1st purl. R. knitting out p., decrease at equal intervals 3p. In work 32p. Track. p.: 2 p., *remove 1 p., thread behind the fabric, 1 p.* - from * to * repeat until the end of the p. According to this pattern, we knit all the front rows, and purl. We knit the rows purlwise. We knit only 34 rubles. and then another 1p.

Master class on heel design

We knit according to the pattern, knit to the outermost 11 stitches, 1 broach (remove 1 stitch of the front stitch, 1 stitch, thread it through the removed stitch), turn the work. We remove 1p., 10p., 2p. in 1i., turn. We remove 1 stitch, knit. to the last 10 stitches, 1 stretch. We continue according to this algorithm, making 1p decreases. in every r. until only the central 12 stitches remain. We distribute the loops on the 1st and 4th sp. 6 pieces each.

Along the edge of the heel rise we raise 17l. and 1 more p. between the 1st and 2nd sp. We knit them by the lower segments and 6 stitches. heels, knit the loops of the 2nd and 3rd knitting needles, raise 1 st. between the 3rd and 4th knitting needles, 17 sts. along the edge of the heel rise, we knit them by the lower segments, 6p. heels. Total 83p. Next we work according to cx. 2, performing decreases.

At a height of 19cm from the first decrease in the heel, we start at 17p. decreases for toe design - see diagram. We continue the decreases, finishing knitting the strawberries at 24 rubles. Finish knitting the toe with white yarn:

1st and 3rd knitting needles: knit to the outermost 3p., 2p. in 1l., 1l.;

2nd and 4th knitting needles: 1 knit, 1 broach, knit. to end.

We repeat decreases in even rows. until you receive 10p. Break the thread and thread it through the remaining stitches.

House slippers with knitting needles: video MK

Click on the image of the footprints, knitted to increase it

The tracks are knitted using leftover yarn. You should knit from heel to heel. Use the short row method: cast on 25 stitches, garter stitch.

Here is a short description of how to knit. You should end up with similar footed slippers as in the photo.

Rows 1 and 2 - knit 25 stitches in black.
Rows 3 and 4 - use red for 20 stitches.
Rows 5 and 6 - use black for 25 stitches.
Rows 7 and 8 - knit 15 stitches in red.
Rows 9 and 10 - knit 25 stitches in black.
11th and 12th row - again red color 10 loops.
Rows 13 and 14 - use black for 25 stitches.
15th and 16th row - knit 15 loops in red.
and so on... after which the product is sewn together.

Continued in the comments!!!

Girls, thank you all for the additional master classes that you shared in the comments! They perfectly complemented the trail guide. Thank you for your help! So after reading these lines, scroll down the page to the discussion.

Video instructions on the tracks from Liliya Ulanova

Lilia, a craftswoman I respect, shares her knowledge of knitting simple slips on 4 knitting needles. Take a look and all your questions will be resolved.

Here's another option for trails.

Size 39-40, “Peruvian alpaca” thread from the Pehorskaya factory (50g - 150m), it took one and a half skeins, knitted in two threads, added a synthetic “Sock Additive” to the sole, knitting needles No. 3.

Cast on 51 stitches. In the first row, distribute the loops as follows:

1 chrome, 23p. elastic band 1x1, yarn over, knit 1, yarn over, knit 1, yarn over, knit 1, yarn over, 23p. elastic band 1x1, 1 chrome.

2nd row: 1 chrome, 23p. elastic band, purl 7, 23p. elastic band, 1 chrome.

3rd row: 1 chrome, 23p. elastic band, yarn over, knit 3, yarn over, knit 1, yarn over, knit 3, yarn over, 23 p. elastic band, 1 chrome.

4th row: 1 chrome, 23p. elastic band, purl 11, 23p. elastic band, 1 chrome.

5 row: 1 chrome, 23p. elastic band, yarn over, knit 5, yarn over, knit 1, yarn over, knit 5, yarn over, 23 p. elastic band, 1 chrome.

6th row: 1 chrome, 23p. elastic band, purl 15, 23p. elastic band, 1 chrome.

7th row: 1 chrome, 23p. elastic band, yarn over, knit 7, yarn over, knit 1, yarn over, knit 7, yarn over, 23 p. elastic band, 1 chrome.

8th row: 1 chrome, 23p. elastic band, purl 19, 23p. elastic band, 1 chrome.

Continue this way until the next purl row succeeds:

1 chrome, 23p. elastic band, 47 purl, 23 p. elastic band, 1 chrome.

After this, knit one row of all loops, purl, second row of all knits. Next comes the sole, here you can add synth. thread. The sole is knitted on the middle 13 loops according to the principle of knitting the heel in ordinary socks. That is, knit:

1 chrome, 40 purl, 12 knits, 2 stitches together. Turn knitting.

1 chrome, 11 knits, 2 loops together. Turn knitting.

1 chrome, 11 purl, 2 loops together purl. Turn knitting.

Then knit these 13 loops with a 1x1 elastic band, picking up 1 side outer loop at the end of each row and knitting it together with the last loop of the row (in the front rows - front, in purl rows - purl). When all the side loops are knitted, the trail is finished. Next you can crochet the upper part of the trail. Knit the second track in the same way.

To decrease or increase the size, you can change the number of loops in certain places, for example, for sizes 36-38, cast on 21 loops for the elastic instead of 23. And knit until there are 21 loops at the base of the triangles. Accordingly, for sizes 42-44, cast on 27 loops and knit until the triangles also have 27 loops, and knit the sole not on 13 middle loops, but on 15.

Here's another master class on footprints
We cast on 40 loops.
1st row: k1, p1.
2nd row: knit 18 loops according to the pattern, yo, k1, yo, 2 knits (these will be the central loops), yo, 1 knit, yo, 1 knit, then to the end according to the pattern.

3rd row: according to the drawing (all yarn overs and what is between them - purl).
This is what happened.
Here the central 2 loops are clearly visible. We will use them as a guide when yarning over

In the center, the yarn overs will be before and after the 2 center ones.

This is how it should look from the wrong side

We continue knitting

We knit until we get 10 yarn overs.

We knitted 6 rows with knit stitches, but the 6th row only reached the middle.

We knit 5 loops, but the 5th and 6th together.
Then we unroll the knitting.

5 more knit stitches, but the 5th and 6th stitches together.

This is how a sock should close

Not enough. How to knit footprints with knitting needles? Step-by-step instructions will help us with this.

Threads and knitting needles

It is best to choose a separate material for each item of clothing. Same with knitting. Yarn for socks or footwear should first of all be durable. To knit the foot, you can use the same threads as for the main part of the foot, just reinforce them with an additional thread. Which one is better to choose? Of course, nylon. This yarn is thin but durable; soft, but holds its shape well. You can take standard knitting needles for knitting footwear. The formula is this: a thread in two folds, slightly curled, is equal to the thickness of the knitting needle. Or you can take knitting needles a little thinner than for knitting a blouse or hat. So we've dealt with necessary materials and tools. Let's look at step-by-step instructions on how to knit footwear.

Sock footprints

Knitted socks or footwear should be warm to warm your feet - this is their intended purpose. Some people put them into boots or boots, while others use them as house shoes. There is an option when footwear or socks are knitted openwork, from thin threads. This product can be safely worn with open shoes in the summer.

The easiest way

There are several variations toHow to knit the tracks with knitting needles. Step-by-step instructions are written in several rows. So:

Cast on 7 stitches on the needles.
Knit a strip on 7 stitches using knit stitch or stockinette stitch for the length of the foot + 2 centimeters + heel height.
Cast on the required number of stitches along the edge of the strip so that the fabric is even. The heel height remains free for now.
Loops along the edge of the trace strip, 1 decrease, 7 loops (middle), 1 decrease, loops along the edge of the trace strip. Decrements must be made in each row - both front and back. Also at the end of each rowfor double loopit is necessary to grab the loops along the edge of the tail left for the heel. During the knitting process, the heel will be formed and will not need to be sewn.
When the height of the trace becomes sufficient, close the loops.

You can knit in any satin stitch, pattern, or jacquard. But these footprints fit best on the leg if they are tied with a regular 1x1 elastic band. This was the first way how to knit tracks men's knitting. Step-by-step instructions for this method of work are the same for all sizes, it is universal.

Tracks quickly

There are situations in life when you need to do something very quickly. TO How to knit tracks with two knitting needles? Step-by-step instructions will help you do this job very quickly.

Cast on such a number of stitches on the knitting needles that the length of the cast-on edge is slightly less than the length of the foot.
In the first row, divide the loops into two knitting needles - knit the first, remove the second, leaving the thread in front of the loop to be removed. Knit all the loops like this.
In the reverse row, knit the loops that were removed, and remove those knitted in the previous row, leaving the working thread between the two loops.

Knitting in this way allows you to immediately get a double fabric. The knitting removed from the knitting needles will look like this:

To make the tracks fit better, you need to knit the last few rows with a 1x1 elastic band or add an elastic thread. For those who are already more or less versed in knitting techniques, you can make such a stitch with a decrease along the toe, then the product will receive more correct form. We looked at another option, how to knit the tracks with knitting needles. Step-by-step instructions and a description of the work will help you make the item high-quality and practical. By the way, for double knitting footwear without decreasing the toe, it is best to take a fairly elastic yarn or at least add a nylon thread, which will provide the product with an anatomical fit.

Traditions to the rescue

There is another interesting way to knit footprints with knitting needles. Step-by-step instruction:

Cast on the required number of stitches on four knitting needles (you need to start from the length of the ankle circumference).
Knit 5-7 rows with 1x1 rib.
Then knit the heel on three needles: remove the loop, knit the next one, purl all the loops on the reverse row. Continue knitting in this way until the required heel height is reached.
Next, divide the heel into three parts, knit the middle one, at the end of each row, grabbing the first loops of the left side parts. This will form the heel.
Cast on stitches along the edge of the heel, decreasing along the toe if necessary.
Knit the foot in any knitting stitch - rib, braids, satin stitch - to the length of the foot.
Make a sock by knitting three stitches on the sides together with the knit stitch.
Break the thread, pull it through the remaining loops, tighten and put it on the wrong side and fasten.

Simple and unusual

Many needlewomen think about how to knit footwear. Step-by-step instructions with a description of the work will help you knit unusual house shoes. The model is knitted on four needles. For example, on knitting needles No. 3 for size 37-38, cast on 60 stitches, distributing them evenly, 15 on each knitting needle. Knitting in the round. The first 6-7 rows should be knitted with a 1x1 elastic band. Then we leave the first three knitting needles idle, and knitting continues on the fourth knitting needle. A “tongue” is created on it using stockinette stitch for 40-45 rows, depending on the size of the leg. Then knitting continues as follows:

15 sock stitches on the fourth needle.
The required number of loops (40-45) along the edge of the tongue + 15 loops of the first knitting needle.
15 stitches on the second needle.
15 loops on the third needle + 40-45 tongue loops.

On four needles in the round, knit with 1x1 rib for 10-12 rows (depending on the size of the leg). The next step will be to knit the trace. On the third knitting needle, 15 loops should be knitted so that the last loop of each row is knitted together with the corresponding loop along the edge of the side panel. If you knit these two loops together, then the mark will not have to be sewn, it will form immediately. The trace and loops of the fourth knitting needle - the toe - are also knitted together, simultaneously closing the knitting. Place the tail of the thread on the wrong side.

Traces "Across"

Let's look at another step-by-step instruction on how to knit footwear. A photo of this unusual product is presented below. So, cast on 25 loops. Knitting is done in stocking or stockinette stitch. By the way, you can immediately decorate the tracks, then you need to take yarn of the main color and additional 1 - 3 colors. So, cast on 25 stitches with the main yarn on needles No. 3. Knit 2 rows using any satin stitch. Then knit 2 rows on 20 loops in a different color. Again 2 rows on 25 stitches in the main color. The next 2 rows are colored on 15 loops. This is all the work: 2 rows on 25 loops of the same color, then 2 rows of shortened colored ones on 20 loops, 2 rows in the main color on 25 loops, and again shortened 2 rows on 15 loops. This is repeated until a fabric of suitable size is obtained, so that by sewing the back seam and the seam of the sole, a trace is obtained.

Simple truths

Warm and cozy little prints can be knitted in many ways, which have been tested by craftswomen. You can come up with something on your own, because knitting is a rewarding activity that gives room for creativity, allowing you to redo mistakes many times. Beginner knitters will find it interesting to learn how to knit slips with knitting needles. Step-by-step instructions and photos of similar work will always help you choose the right model and understand the principle of operation. It is best to take synthetic or semi-synthetic threads so that they are durable, not too slippery, but at the same time warm and non-prickly. The toe of the heel is formed by adding or subtracting stitches, depending on which side the knitting is started from. This, perhaps, is the whole difficulty in working with traces. Heel and outsole can be shaped by stitching finished product. For comfort, the tracks can be decorated with various decor - knitting flowers, leaves, sewing buttons or beads. House shoes will be useful for everyone at home - children, mom and dad, grandparents. And as a small gift, it will always please.

What are the tracks? This is something between slippers and short socks. Nylon soles can be worn under ballet flats and open shoes if your feet are cold or for some reason your shoes are chafing. But today we will talk about knitted footwear. Many people love footwear because they are easy to put on, unlike socks, they are easy to wash, unlike slippers, and at the same time your feet are always warm.

Even as a child, my grandmother knitted half-woolen slippers for me; to this day, in the cold season, I prefer to wear slippers at home rather than slippers. I think that most of our readers knit better crochet than with knitting needles, so we decided to compile a selection of crocheted footwear.

Which yarn to choose for knitting footwear?

Previously, footwear was knitted from leftover yarn, from old unraveled items, because... There was not such a large selection of threads on sale. Now needlewomen have freedom. Did you know that there is a special sock yarn? It can be single-colored or sectionally dyed, also with different inclusions. This yarn is very soft, although it contains about half wool, it does not itch and does not fray for a very long time. Tested from my own experience. Sock yarn has one drawback - its high price. What to do if you can’t afford imported sock yarn?

Is it necessary to make crochet soles for footprints?

If you cannot afford to buy special abrasion-resistant sock yarn, we suggest making a sole for the footprints:

the sole can be knitted from denser and stronger yarn and sewn with a second layer on top
you can add nylon thread to the yarn
the sole can be made from leftover leather
You can buy it ready-made in the store.

The main thing to remember is that the sole of the crocheted footprints should not be slippery.

Crochet footprints, models from the Internet

Crochet pink footprints, MK from Golubka

Yarn Rio from Kamtex, hook No. 3.25.

And this is the diagram of the sole for the pink footprints:

Crochet footprints with bow

We will need:

yarn for the sole. This time I took a skein from those that sell for 15-20 rubles. at the market, I will knit in 2 threads;
yarn for the main part. For this pair, I took a wool blend from Kamtex “Romance” 120 m per 100 g (I would like to advise you to take a thread thicker than mine);
hooks No. 3 and No. 4;
satin ribbon 3-5 cm wide for bows and 1 cm wide to tighten these bows;
insoles of the right size;
tailor's pins with a plastic tip;
sewing threads and needles.

Size 23-24 cm or 37-38. Approximately 70-80 g. yarn.

Crochet footprints with floral motif

These slippers crocheted, begin with knitting a floral motif, which is located at the top, in the most visible place.

First you need to make the so-called amigurumi ring. That is, wind the thread around your finger several times, and knit the first row of the pattern into this ring. Then, pulling the end of the thread, tighten the ring so that there is no central hole.

Knitting begins with a beautiful floral motif: make an amigurumi ring, as described above.

1st row: 4 vp, 1 st. with 2n in the ring, 3 vp, * 2 tbsp. with 2n in the ring, 3 vp, repeat from * 6 times.

2nd row: 1 ch, 1 st. b/n in the arch, pr.r., 5 ch, *1 tbsp. b/n in the arch, etc., ch 5, repeat from * to the end of the row.

3rd row: 1 ch, *1 st. b/n in the arch, pr.r., 1 v.p., 1 tbsp. from 2n, 1 vp, 1 tbsp. from 2n, 1 vp, 1 tbsp. from 2n, 1 vp, 1 tbsp. from 2n, 1 vp, 1 tbsp. from 2n, 1 vp, 1 tbsp. from 2n, 1 vp, 1 tbsp. from 2n, 1 vp, 1 tbsp. from 2n, 1 vp, 1 tbsp. from 2n, 1 vp, repeat from * to the end of the row.

Tie the central motif with the same thread and change the color.

Tie a square around the perimeter with a new thread and make a chain of 75 vp. from one corner to the next (4th row).

In the fifth row, the square and chain need to be tied with single crochets according to the pattern.

Blue and blue crochet footprints

Size: 36-37.
You will need:

remnants of thick yarn of the same thickness in blue, gray and blue colors,
hook No. 4,
insoles.

Description of crocheting footwear:

Using blue yarn, knit 20 air. p. and knit 6 rows of stitches around them. b/n, adding 3 loops on turns in each row. Next, knit the top. Along these loops, continue to knit a trace with blue yarn, as follows: 7th row 3 unknitted stitches. s/n, connected together, 1 air. p. (knit the next stitch through 1 loop).

Knit the 8th row with gray yarn, like the 7th row, but knit a stitch between the stitches of the previous row.

Knit the 9th row with blue yarn, like the 7th row, but do not knit a chain loop between the stitches.

Knit the second slipper in the same way. Sew insoles to the soles.

Blue crochet footprints

At home we should feel comfortable and cozy. And things dear to our hearts help us with this. Knitted house slippers envelop our feet in warmth, like fluffy kittens. And they were created by designer Dora Ohrenstein and called “Lucy’s Slippers.”
Size: The description is given for small, medium and large sizes, which correspond to dimensions: 10 cm wide X 20 cm long (4 cm wide X 23 cm long; 11 cm wide X 25 cm long).

Multi-colored crochet footprints

Crochet tracks from Trinity yarn “Derevenka”

Size 37-38.
Yarn - “Village” from Troitsk, natural color (1508), 100% wool, 170 m / 100 g.,
Yarn consumption 100 g.
Hook No. 3.5.
Knitting density of the main stitch (single crochet) Pg = 1.54 loops in 1 cm, Pv = 1.8 rows in 1 cm.
Leg girth (He) 23 cm.

Sledki - sneakers for adults

Crochet footprints with flowers

Children's footprints are crocheted using the same pattern (author):

Several patterns of crocheted footwear, crocheted according to the same description

Finished Size: Directions are for 8" [approx. 20.5 cm] feet - size 1.
Data in parentheses () is for 9 and 10 inch feet - sizes 2 and 3.
Materials: main yarn of dark green color, a small amount of yarn of light green and amber (golden) color: needle for stitching knitwear; hook size 3.75 (or 4 mm) and 5.00 mm.

Crochet slippers “Three flowers”

Master class from Efremova Evgenia.

To work we need:

100 g of red Romance yarn produced by KAMTEKS (50% wool, 50% acrylic, 120m/100g);
100 g of gray yarn Romance produced by KAMTEKS (50% wool, 50% acrylic, 120m/100g);
a skein of jute produced by KAMTEKS to increase the wear resistance of the sole and massage the feet;
hook No. 4, hook No. 2.5;
gray and red sewing threads for sewing on flowers;
scissors;
4 hours time;
good mood.

Crochet footprints, models from our website

Hook No. 3.2, slippers approximately size 38.

How to knit house slippers. The master class is offered by HELENOCHKA (Elena from the city of Ivanovo). Slippers for your loved one.

We will need: threads of two colors, a hook, a small piece of fabric and two perforated insoles.

Tools:

hook number 3
medium thick black thread
metal black zipper 70cm.

Sizes: 35/37 – 38/40 – 42/44 (EU sizes).
Foot length: 22 – 25 – 28 cm.
You will need: DROPS ESKIMO yarn (100% wool, 50 m = 50 g) 100 g for all sizes red; 50 g for all sizes milky white; 50 g for all sizes beige; remnants of black for the eyes. 8 mm hook or size suitable for obtaining the desired knitting density 11 sc = 10 cm wide.

Crochet footsteps video lessons

How to crochet slippers with a high heel for an adult

Thanks to the protruding heel on the slippers, you will feel comfortable wearing them. See how to do it.

Openwork crochet footprints

Crochet for beginners. Yarn Lanagold 100g/240m, hook No. 3.5.

The video should load here, please wait or refresh the page.

Crochet footprints with an interesting pattern

For knitting you will need:

stitching needle
hook No. 3
yarn of two colors (main and a little contrasting for the pattern)

The video should load here, please wait or refresh the page.

Knitted socks are essentially a cross between knitted socks and knitted slippers. Sleds do not have a hard sole and are low to the ground. And if the footprints are made with your own hands, then you will feel even more warmth and comfort. With the onset of cold weather, it’s so nice to wake up in the morning and put on warm and cozy indoor footwear!

Foot prints are usually knitted on two, four or five needles. Crochet is sometimes used for finishing.

There are 3 technologies for knitting sleds:

Knitting from the sock with a minimum set of stitches. During subsequent knitting, the set of loops is increased with the help of yarn overs.

Knit according to the sock principle - from heel to toe.

Cross knitting from one edge to the other with stitching.

Master class on how to quickly knit tracks:

1. Cast on 13 stitches and knit 8 rows in a garter pattern.

2. Every 5 stitches, make an increase (yarn over, knit and yarn over again). Make a purl row.

3. Then make an addition before and after the yarn overs using a yarn over, 3 knit stitches and yarn over again. Repeat every 5 stitches. Make a purl row.

4. Continue until you have 39 stitches.

5. Knit 15 stitches and set aside, continuing to knit 9 stitches. Knit, rounding the heel.

6. At the end of the rows, knit the last stitches together with the 15 stitches we set aside earlier.

7. Leave 9 stitches to work on and cast on 18 stitches on each side. You will have 45 stitches, of which the first is an edge stitch, 5 are a garter stitch, 1 is a purl stitch, 4 are a knit stitch, 1 is a purl stitch, 21 are a knit stitch, 1 is a purl stitch, 4 are a knit stitch, 1 is a purl stitch, 5 are a garter stitch and 1 - edge.

8. Knit 40 rows according to this pattern. Knit the heel in the same way as the toe.

9. Knit the last rows with a garter pattern and bind off the loops.

Shawl pattern

Footprints with a Norwegian pattern

1.Cast on 5 stitches and knit in a garter pattern, casting on a stitch at the beginning and end of the row. Cast on 25 stitches this way.

2. Knit 1 edge stitch, 1 knit stitch, 1 purl stitch, 2 knit stitches.

3. When only 2 stitches remain, knit 1 and purl 1.

4. Work the wrong side and 30 rows in a 2x2 pattern.

5. Assemble the work as at the beginning of knitting - 1 loop from two knit stitches, 1 loop from two purl stitches, etc.

6. Decrease 1 loop on each side until there are 5 loops left, from which we will make a strap for the footprints.

7. Sew a button to the strap and stitch around the areas that were knitted with an elastic band.

Slippers with two spokes

Children's footprints on two knitting needles without seam

You will need: 50 grams of yarn (fold the thread in half, knitting needles No. 3 and hook No. 3.

1. Cast on 28 loops. Work 19 rows in stockinette stitch and make a heel using 8 center stitches.

2. Cast on 11 stitches on the sides of the heel.

3. Raise 9 rows and make 7 chain stitches in last row. To achieve circular knitting, join air loops with the opposite part.

4. Pick up stitches using stockinette stitch. If you wish, you can make a pattern on the tracks.

Tired of bulky indoor slippers? Then crochet stylish, light and very warm ballet shoes. Neat knitted ballet slippers look very elegant, and warm your feet no worse than regular slippers.

Slippers.

So, you need to cast on 3 loops:

1st row: chrome, yarn over, purl, yo, chrome.
2nd row: chrome, purl, yarn over, knit, yarn over, purl, chrome.
Row 3: edge, knit, purl, stitch, purl, stitch, purl, face, edge.
Row 4: chrome, purl, knit, purl, nak, knit, nak, purl, knit, purl, chrome.

Yarn overs are always knitted with a purl loop.
The top is knitted with 1x1 rib
I ended up with 73 stitches on my knitting needles.
The last time I made yarn overs was on the wrong side.

Divide into three parts 26-21-26, knit the toe like a heel on the middle 21 loops, grabbing the side ones until the loops on the side knitting needles run out.

Now we begin to knit the side parts together with the sole, for this we cast on 12 loops on each side, then we knit straight, not forgetting to knit the first and last 5 loops in garter stitch.
I got 30 rows to the heel.
Now we knit the heel and knit the last few rows in garter stitch.

The edge was crocheted with b/n columns, "crawfish step".

Every year, trails become more and more popular. They are used as house slippers, as they are comfortable, practical and very beautiful. If you want to learn how to knit beautiful slips on two knitting needles, then this article will become your reliable assistant in this matter. Also below you can find diagrams with step by step description work.

How to knit slips on two knitting needles: technology

There are many technologies for knitting footwear. To make them, you can use four knitting needles, circular knitting needles, or a crochet hook. We will look at one of the simplest ones - tracks on two knitting needles. Even a novice needlewoman can do this kind of work without much difficulty.

As for the technology of knitting footwear itself, there are three of them:

The first involves starting to knit the product from the sock. The minimum number of loops is cast on, then using yarn overs the number of loops is increased.
The second is knitting from the upper part (heel), which goes down to the toe. These tracks are knitted according to the principle of socks.
The third is transverse. With this technology, the track is knitted from one edge to the other, and then stitched.

Below we will consider different variants knitting leopards, and step-by-step instructions will help you complete the job without difficulty.

How to knit slips on two knitting needles for beginners with photos

We prepare the necessary equipment for knitting leopards. To work you will need:

Thick yarn for the base.
Thin yarn for decorating the cloves.
Knitting needles No. 4 (circular in our case).
Needle and thread for stitching.

Let's get started:

1. Cast on 87 loops, knit 10 both front and back rows with front loops, adding one loop at the end of each row. The result is 97 working stitches.

2. Knit a row with a thin thread.

3. Make a clove pattern. How to make it is shown in the video.

4. It turns out that this is the “leaky” part.

5. Fold it in half and, inserting the knitting needle into the lower loops (the photo shows which loops need to be picked up), collect the teeth.

6. Gather the cloves with yarn of the main color.

7. Raise 8 rows with a 1X1 elastic band.

8. From the edge of the knitting, knit 30 loops with the main thread and introduce a thin thread for the cloves, knitting and shaping them on the middle 37 loops.