Even if a woman (and a man too) has only one wedding ring, he still needs to have a periodic bath day. Or at least clean it.

Everyone washes their face several times a day, but they forget about the ring or chain. But microbes and dust accumulate on them, and the gold itself fades over time, becoming covered with microcracks and stains.

Of course, if you have a whole box of gold jewelry, and some of it is even exclusive, then it is best to turn to specialists for help. This is especially true for those jewelry that consists not only of gold, but also ennobled precious stones, pearls or very expensive, carved, with many small links.

Professionals will expertly clean gold jewelry, which will become as good as new after cleaning.

You can also purchase a special product at a jewelry store that is designed for cleaning gold jewelry. Most likely, you will be offered jewelry cosmetics from the Aladdin company. But if you still decide to clean gold items yourself, then at least buy special wipes for polishing gold items in the store. Their price is reasonable. After all, those rags that you have at home may simply not be suitable for this job.

And for those who still want to clean gold jewelry themselves, below are methods for cleaning gold jewelry and recommendations on how best to do it.

Important!

But first you must remember that cleaning gold without stones and with stones differ significantly from each other! After all, if an ordinary wedding ring can be cleaned with soda and toothpaste, and can also be dipped in boiling water, then a ring with a precious stone requires a more careful attitude.

For example, when cleaning with abrasives, scratches may appear on the smooth surface of the stone, and when in contact with boiling water, the color may change. This means that if you are going to clean a gold ring or earrings with precious stones such as amber, opal, emerald, pearls, then they cannot be mechanically cleaned using chalk, toothpaste and other substances.

The main methods of cleaning gold jewelry - liquid solutions with the addition of active substances: soap, ammonia, hydrogen peroxide, vinegar, citric acid and others - must be applied carefully to gold jewelry with stones.

After all, if hard precious stones (diamond, beryl, aquamarine, topaz, quartz) react well to contact with ammonia or hydrogen peroxide, then soft stones (turquoise, coral, pearls) cannot be cleaned with either vinegar or ammonia.

You also need to treat white gold with care., which can be damaged by too vigorous cleaning. Therefore, it is also cleaned with liquid soap, ammonia or alcohol.

Cleaning gold with soap

Method 1. This method is the simplest and most easily accessible. To keep your gold jewelry as good as new even after a few years, they need constant care. If you always wash them in soapy water, you won't have to resort to more drastic measures.

To do this, pour hot water into a bowl and add soap or dishwashing liquid. Whip up a rich foam and dip your gold jewelry into it.

After one or two hours, rinse them in clean water and place them on a napkin to dry.

Festive video recipe:

If the jewelry is poorly washed, take a soft toothbrush and lightly scrub the jewelry with it.

Method 2. Grate laundry soap and add the same amount of chalk to it. Pour some hot water to make a liquid paste. Rub this mixture onto your decorations. For this purpose, you can use a soft toothbrush. Polish clean jewelry with a soft, dry cloth.

Method 3. Prepare a small amount of soap shavings. Add to it the same amount of Vaseline, crushed chalk and water. You will get a thick paste. Apply this paste to a soft cloth and clean your gold items. Then wash them well to remove any greasy film and dry them.

Cleaning gold jewelry with sugar

This method is good for adding shine to gold jewelry that does not need to be cleaned to remove dirt and stains.

Pour clean water into a glass and add two to three teaspoons of sugar. Stir. Immerse your gold jewelry in sweet water and leave it there overnight. In the morning, take out the products and rinse with plain water. Pat dry with a clean napkin.

Cleaning gold with vodka

This is probably the most common and easy way. In addition to vodka, you can use alcohol and even gasoline. Apply the liquid to a piece of cloth and rub the product with it. If the product has many links, then it is best to pour the liquid into a small container and lower the decoration into it. This method is suitable not only for an engagement ring, but also for decoration with transparent precious or semi-precious stones.

Cleaning gold with carbonated soda

To restore the original shine to gold jewelry with clear gemstones, dip it in a glass of soda and leave it overnight.

Alka-Seltzer to the rescue!

If the decorations are dull, just put them in a glass of sizzling Alka-Seltzer for two minutes. This is often enough to make the jewelry shine again.

Cleaning gold with vinegar and citric acid

Pour vinegar, lemon juice or diluted citric acid into a cup. Place the gold jewelry and hold for a few minutes. Then rinse and dry.

Cleaning gold jewelry with baking soda

Method 1. Pour some baking soda onto a plate and add enough hydrogen peroxide to make a paste. Clean the ring with this mixture, and then rinse it in clean water.

Method 2. Sprinkle the gold jewelry with a thin layer of baking soda. Then pour vinegar and rinse with clean water. This method cannot be applied to gold jewelry with pearls or other precious stones.

Method 3. Mix table vinegar with soda in a 2:1 ratio and immerse gold jewelry in this liquid for one to two hours. Then rinse with clean water and dry with a soft cloth or special napkin.

Method 4. Cover a bowl with foil and pour in some water. Add salt and baking soda to the water. Stir. Put it in water gold decoration and use a soft brush to clean thoroughly. Then rinse in clean water and dry.

Method 5. Place 50 g of baking soda in a small enamel bowl and pour half a glass of water. Place gold jewelry in a saucepan and put it all on the fire. As soon as the water and soda boil, add two tablespoons of vinegar, reduce the heat and boil for twenty minutes. Take out the decorations and let them dry.

Cleaning gold jewelry with baking soda

This method is suitable for both silver and gold jewelry. Prepare a solution of half a liter of hot water and a tablespoon of soda.

Place a piece of zinc in a jar and place all the gold jewelry there. Fill them with hot soda solution.

Take out the jewelry, rinse it in clean water and dry it.

Cleaning gold jewelry with ammonia

Method 1. Add a few drops of ammonia to a glass of water and immerse gold jewelry in it. After an hour, take them out and rinse them in clean water. If the jewelry is very dirty, you can add a little liquid soap to this composition.

Method 2. Pour equal amounts of hydrogen peroxide and ammonia into a glass of water. Add a little to them washing powder. Place gold jewelry there and leave for five minutes. Then remove them from the glass, rinse them in clean water and dry them with a soft cloth.

Method 3. Pour a glass of water into a small saucepan, bring to a boil and add a tablespoon of ammonia and some liquid detergent, for example, dishwashing detergent. Dip gold jewelry in this water and leave for two hours. Then take them out and rinse them in clean water. This method helps clean heavily soiled jewelry.

Method 4. Place heavily soiled gold jewelry without stones in a small container and fill it with ammonia. Leave it for several hours without fear of ruining it. Then remove the jewelry from the solution and rinse under running water. Dry.

Cleaning gold jewelry with lipstick

Apply any lipstick to the gold item (you can use the cheapest one). Wait a little and carefully wipe off all the lipstick with a clean, dry cloth. Your gold jewelry will immediately shine like new. Titanium dioxide has this effect on gold.

Cleaning gold with mustard powder

Mustard powder is a mild abrasive, so it will not cause any harm to gold rings. To clean them, sprinkle a little dry mustard on a cloth and gently polish the items.

Cleaning gold with toothpaste or tooth powder

Since these substances are still abrasives, they need to be cleaned very gently, only lightly polishing the product. Diamonds respond very well to such cleaning. To do this, you just need to squeeze a small amount of paste onto a soft toothbrush or cloth and rub the ring with it. You can only use white classic toothpaste without a whitening effect.

Tooth powder can be diluted lemon juice. After cleaning, the ring is washed in clean water and dried on a rag or paper napkin.

Polishing gold jewelry with beer

Method 1. This method is only suitable for jewelry without precious stones. Moisten a cloth with light beer and gently wipe the jewelry with it. Then wipe dry.

Method 2. Combine half a glass of warm beer with one egg yolk. Clean with this mixture gold product and then rinse in clean water.

Cleaning gold with salt

Pour a glass of hot water into a bowl and add four tablespoons of salt. Stir until completely dissolved. Place gold jewelry in this solution and leave for twelve hours. Then rinse them under running water and dry well.

Cleaning gold jewelry with a bow

Take an onion and peel it. Then grate and squeeze the juice into a cup. Place jewelry in this juice and clean with a soft brush or cloth. Rinse and dry the cleaned items.

Cleaning gold jewelry with chemical reagents

Method 1. If you accidentally dropped iodine onto the ring, you can clean it in this way: put one teaspoon of hyposulfite in a glass of water and stir. Dip the ring into this solution for fifteen minutes. Then rinse and wipe dry.

Method 2 Suitable for cleaning matte gold. Mix 8 parts bleaching lime, 7 parts bicarbonate of salt and 2 parts table salt in a bowl. Add 1/3 cup of distilled water. Place the decoration in the mixture for a few minutes. Then take them out, wash them with alcohol and leave them on sawdust or a paper towel to dry.

Method 3. Mix 16 parts chalk, 4 parts white lead, 6.5 parts clay, 0.5 parts bloodstone, 1.5 parts magnesia. Use this powder to clean your gold jewelry.

Method 4. Mix 80 g of iron oxide (kolkotara) and 30 parts of ammonia. Clean your jewelry with this mixture.

Method 5. If stains appear on the gold ring, they can be removed with a borax solution. To do this, moisten a cloth with the solution and wipe the ring.

Tips to help you keep your gold jewelry in excellent condition

• When starting homework, you need to remove all gold jewelry so that it does not come into contact with hot, humid air, for example, in the bathroom. And also did not come into contact with detergents such as bleach or bleach.
• Sometimes the rings grow into the finger so much that they can no longer be removed. In this case, you should always wear rubber gloves to protect the ring from an aggressive environment that could damage it.

Wash gold jewelry often in soapy water or wipe it with alcohol.

• Remove all jewelry before taking a bath or going to the shower, sauna, or swimming pool.
• Remove gold jewelry before undergoing cosmetic procedures in a salon or at home. After all, creams, lotions or paints can react with gold and ruin it.
• Store gold jewelry in a dry place in a wooden box. You should not store jewelry in a cardboard box or box, as cardboard can release substances that will affect the color of the items. For example, if cardboard contains sulfur, the surface of the jewelry will oxidize.

Remember to take care of your gold jewelry and it will always be in perfect condition!

Gold jewelry fascinates us with its brilliance and radiance. Jewelry made from precious metal is durable and elegant. However, over time they may become dull and coated. But don’t worry, you can quickly and effectively clean gold at home with the help of available tools. How to do this - read our article.

Over time, gold jewelry becomes tarnished due to exposure to sebum, cosmetics and dust.

Available means

IN jewelry stores You can purchase ready-made gold care products. Special fluids, sprays, pastes and wet wipes provide gentle care for the metal and help to gently and effectively clean gold. In addition, today you can find an ultrasonic cleaner for precious items on the market, which was previously used only for professional cleaning.

But what to do if there are no special tools at hand? They will help traditional methods, proven by experience and time. Cleaning gold yourself is not difficult at all. Let's look at a few recipes, the ingredients for which can be found in every home.

Soak

A popular way to clean jewelry is soaking. The products are placed in a solution, which is prepared from the products available in the medicine cabinet or kitchen, left for a while to act, after which the plaque is removed with a soft cloth.

Brine

The simplest and affordable way To clean gold - soak the product in a solution of table salt. Dissolve 3 tbsp in a glass of hot water. l. table salt, place the decoration and leave overnight (8-10 hours). In the morning, rinse the gold in running water and dry with a soft cloth.

A solution of ordinary salt will cope well with light deposits on gold jewelry.

Sugar

You can clean gold from dirty deposits and return your jewelry to its original shine with the help of sugar. Dissolve 2 tbsp in a glass of warm water. l. sugar and soak the product for 3-4 hours. Then rinse and dry the jewelry. If necessary, you can increase the soaking time to 6-8 hours.

Dishwashing liquid

Dissolve 1 tsp in a glass of hot water. dishwashing liquid (a thick concentrated composition is best), place the decoration and soak for 2-3 hours. For severe stains, you can leave the products in the solution overnight. During this time, the dirty coating will soften and dissolve. Rinse off any remaining product with water and wipe the jewelry with a microfiber cloth. Treat severe stains and hard-to-reach areas with a soft toothbrush.

Using a soapy solution and a soft toothbrush, you can quickly clean gold and restore its shine.

This method can also be used if you need to quickly clean gold. Place a piece of cloth (for example, a handkerchief) at the bottom of a small saucepan or Turk, pour the solution into the container, place the decorations and boil for 2-3 minutes. Rinse off any remaining product and wipe the items dry.

Ammonia

There are several ways to clean gold with ammonia.

To remove light stains, dissolve 1 tsp in a glass of cool water. ammonia and soak the decoration for 30 minutes. Then rinse it in clean water and dry it with a soft cloth.

To clean gold from old dirt, mix 1 tbsp in a glass of water. l. washing powder (can be replaced with liquid soap or dishwashing detergent) and 1 tsp. ammonia. Boil the resulting mixture and place the decoration in the hot solution for 2-3 hours. After the procedure, rinse the product in clean water and wipe dry.

Liquid soap and hydrogen peroxide

Dissolve 1 tsp in a glass of warm water. soap and 2 tbsp. l. hydrogen peroxide and soak the gold item for 20-30 minutes. Rinse with clean water and dry with a soft cloth. For greater effectiveness, you can add 1 tsp to the solution. ammonia.

If you plan to clean gold with ammonia or peroxide, use only glass, ceramic or plastic containers for soaking.

Instead of liquid soap, you can use shampoo to clean gold jewelry.

Soda and foil

Line the bottom of a glass bowl (or other soaking container) with foil. Dissolve 2-3 tbsp in a glass of hot water. l. baking soda, place the decoration in a bowl and fill with baking soda solution. Leave to act overnight or for 8-10 hours. Rinse the gold with clean water and wipe with a dry cloth.

For very severe contamination, you can add 1 tbsp to the soda solution. l. dishwashing detergents.

Polishing

You can clean gold without soaking. Polishing with improvised materials will remove greasy deposits and return the jewelry to its dazzling shine.

Velvet and felt

Polishing gold with a velvet or felt cloth is an old and proven method. Take a small piece of cloth and polish the jewelry thoroughly. Be prepared that this process may take quite a long time.

Eraser

Soft stationery eraser ( white) will not only return shine to the products, but will also help clean gold from light deposits.

Vinegar

Table vinegar (6-9%) is used for polishing. Since the product is quite aggressive, it must be used with caution. Vinegar works well for removing tarnish on gold jewelry.

Soak a soft cloth in table vinegar and carefully treat the product. After the procedure, be sure to rinse the jewelry with clean water and wipe with a soft, dry cloth.

Onion juice

The principle is the same: soak a piece of cloth in onion juice and polish the gold jewelry. At the end of the process, rinse and dry the product thoroughly.

After rubbing with onion juice, gold jewelry will shine even brighter

Lipstick

Non-standard, but very effective way will clean gold and restore shine to tarnished jewelry. For this method It is better to use colorless lipstick. Apply a little lipstick to the fabric and wipe the product. Then polish the gold with a velvet or flannel cloth.

Beer and egg white

Mix 2-3 tbsp. l. beer and 1 raw egg white. Soak a cloth in the resulting mixture and rub the gold jewelry. After the procedure, rinse the product with clean water and dry with a soft cloth.

Mechanical cleaning

Mechanical methods are used to clean hard-to-reach places, as well as to eliminate strong and old pollution, which did not lend themselves to soaking and polishing. Using these methods you can clean complex products, for example, a ring with openwork ornament or earrings with decorative weaving. Carry out mechanical cleaning with care so as not to damage the surface of the jewelry.

For cleaning, you can use a special product or prepare a homemade cleaning paste. Use only soft and delicate mixtures to avoid scratching the gold.

Important: Do not use aggressive abrasives such as baking soda, salt or sandpaper– there is a risk of damaging the surface precious metal.

Multi-component paste

To prepare the paste, mix the following ingredients in equal proportions: crushed chalk, toothpaste without whitening effect, Vaseline, warm water and laundry soap shavings.

Apply the mixture evenly to the surface of the product and, moving in one direction, clean the jewelry with a cotton pad. Then wipe the gold with rubbing alcohol or cologne to remove any traces of Vaseline. Rinse the product in clean water and wipe with a dry cloth.

A regular one is suitable for cleaning gold. toothpaste without whitening effect and colored granules

Toothpaste and Vaseline

Toothpaste and toothpowder contain substances with mild abrasive properties that will help gently clean gold. Since they also contain foaming agents that soften the effect of abrasives, you will not damage the surface of the product.

Use a soft toothbrush and regular toothpaste to clean. Tooth powder must first be mixed with water to the consistency of a thick paste. For easier cleaning, you can add a little Vaseline to the powder.

Chalk and ammonia

Regular chalk will help you clean gold: crush it into powder and mix with ammonia until you get a thick mass. Treat the jewelry with a cloth or soft brush, then rinse and dry the product.

White gold is an alloy of gold with silver, palladium or nickel. To add shine, the alloy is plated with rhodium. Such gold cannot be cleaned with abrasives and brushes; only soft and delicate cleaning methods are suitable for it.

Polishing with colorless lipstick will help restore the shine to white gold items.

Mix ammonia and hydrogen peroxide in a ratio of 1:2, and soak the decoration in the resulting solution for 30 minutes. Then rinse the gold with clean water and dry with a microfiber cloth.

A sugar solution works well. Dilute 2 tbsp. l. spoons of granulated sugar in a glass of warm water and soak the white gold product. Leave to act overnight or for 8-10 hours.

There are several methods used to clean matte gold.

Soak the jewelry in ammonia for 2 hours, then rinse and dry.

Use a cleaning solution to remove stubborn and stubborn stains. Dilute 1 tsp. lime in water to a paste consistency, add a pinch of salt and 0.5 tsp. soda Let the solution sit for 3-4 days. When the solution is ready, soak the decoration in it for 3-4 hours. After the procedure, wash and dry the product.

Gold items are given a matte finish using a special polishing method. Therefore, abrasives and standard cleaning methods are not used for such jewelry.

Be careful when cleaning jewelry with stones - many of them require special care:

1. Avoid abrasives when cleaning opal, turquoise and malachite jewelry.
2. Rubies, topazes and garnets are sensitive to high temperatures– do not use hot water.
3. For amber, pearls, coral and ivory, you cannot use ammonia, solvents, acids and alkalis - it is better to trust the cleaning of such products to specialists.
4. Products with diamonds, topazes, rubies and sapphires can be easily cleaned with ordinary soapy water.
5. Precious and semiprecious stones need to be protected from temperature fluctuations, as they can change color.

If stones are attached with glue, dry clean the jewelry only.

At home, the following methods are used to clean gold jewelry with stones.

Alcohol

You can clean gold with alcohol or an alcohol-containing liquid (vodka, cologne, alcohol lotion). Soak a cotton swab in the product of your choice and gently wipe the jewelry to remove grease and other contaminants.

Petrol

Use purified gasoline (for lighters) to clean your jewelry. Dampen a cotton swab or small soft brush and work on the gold jewelry.

It is recommended to clean diamond jewelry monthly, as they quickly become coated with a greasy coating. Liquid soap, dish soap and ammonia are suitable for care.

By caring for your gold properly, you can avoid tarnishing, tarnishing, and scratching your favorite jewelry. Here are some useful tips:

1. Wipe products with a soft, dry cloth if they have been exposed to moisture.
2. Remove gold jewelry before playing sports, doing household chores, showering, or using cosmetics.
3. Keep gold jewelry away from sunlight and medications.
4. Clean gold as a preventative measure at least once every 2 months.
5. When purchasing gold cleaning products, always check to see if they can be used on stones.
6. Use ultrasonic cleaning at home with caution - some stones may crack.

Threads made of gold and silver, which were used to embroider clothes in the old days, are called gimp. To obtain them, the metal wire was pulled for a long time with pliers to the required fineness. This is where the expression “to drag out the rigmarole” came from - “to do long, monotonous work” or “to delay the completion of a task.”

The easiest way to remove scale and carbon deposits from the soleplate of the iron is with table salt. Pour a thick layer of salt onto the paper, heat the iron to maximum and run the iron over the salt bed several times, applying light pressure.

If your favorite things show the first signs of gestation in the form of untidy pellets, you can get rid of them using a special machine - a shaver. It quickly and effectively shaves off clumps of fabric fibers and returns things to their proper appearance.

There are special traps to combat moths. The sticky layer with which they are covered contains female pheromones that attract males. By sticking to the trap, they are eliminated from the reproduction process, which leads to a decrease in the moth population.

Before removing various stains from clothing, you need to find out how safe the selected solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of ​​the item from the inside out for 5-10 minutes. If the material retains its structure and color, you can move on to stains.

Stretch ceilings made of PVC film can withstand from 70 to 120 liters of water per 1 m2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you don’t have to worry about leaks from neighbors above.

IN dishwasher Not only plates and cups are washed well. You can load it with plastic toys, glass lamp shades and even dirty vegetables, such as potatoes, but only without using detergents.

Fresh lemon is not only suitable for tea: clean dirt from the surface of an acrylic bath by rubbing with half a cut citrus, or quickly wash the microwave by placing a container of water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt can simply be wiped off with a sponge.

Today, every person has gold products. In the old days, gold jewelry symbolized a certain social status of a person, but today anyone can go and buy gold in any jewelry store for relatively little money.

Jewelry made of pure gold is practically not sold anywhere, since this metal is very soft in nature and bends and loses its shape when worn every day. Instead, an alloy is used, which includes not only gold, but also aluminum, cadmium, copper, silver, zinc and other metals. It is because of these metals that jewelry over time loses its original shine, begins to fade and looks more like costume jewelry. To restore the original shine and shine, it is necessary to clean. You can take your jewelry to a professional jeweler for cleaning, but you can clean your gold yourself at home.

Advice: “You need to carefully clean gold at home so as not to scratch or damage the jewelry itself.”

Note to the owner:

• In many jewelry there are places that are difficult to reach, these are, first of all, patterns and places for inserting stones. In these cases, after cleaning, it is necessary to rinse the jewelry with warm water and brush all hard-to-reach places with a regular toothbrush.
• All the necessary ingredients for cleaning your home can be purchased at the pharmacy.
• Cleaning utensils should not be metal and should be deep enough to cover Jewelry in the prepared solution.

Recipes for cleaning yellow gold jewelry

1. For minor stains, use a regular soap solution. To do this, take a few teaspoons of soap (you can use shampoo or dishwashing detergent) and dissolve it in water, put gold there and leave for 3 hours, then wipe with a soft cloth.
2. For more severe stains, use ammonia. To prepare the solution you need to take 2 tbsp. l. detergent (soap, shampoo, washing powder) and a few teaspoons of ammonia, mix everything in a glass of water and put the gold in for 1 hour. Afterwards, rinse the jewelry in water and wipe dry with a cloth.
3. Buy a special cleaning paste at any jewelry store. You can prepare this paste yourself, using the means at hand; the paste should have a creamy consistency. You need to take equal amounts of Vaseline, toothpaste, water, chalk (crushed in a coffee grinder) and soap, mix everything and apply to the gold item for 15 minutes. Afterwards, rub a little with a cloth or toothbrush, rinse in water and dry. This product is very strong and replaces mechanical professional cleaning.
4. Gold jewelry can be cleaned well with hydrogen peroxide. For a glass of water, take 50 ml of hydrogen peroxide, a couple of teaspoons of ammonia and a few teaspoons of soap, mix everything and immerse the product in the solution for 30 minutes, or a little longer. Next, wash with water and dry with a cloth.
5. One of the simplest folk recipes- This is cleaning with salt. Take salt (2 tablespoons) and dissolve in a glass of water, leave the product in the solution overnight, then wipe dry.
6. Cleaning with baking soda and foil. Dissolve a few tablespoons of soda in 250 ml of water, take a porcelain or glass container, cover the bottom with foil, put gold and fill the jewelry with this solution. Leave it overnight, then rinse the items thoroughly and wipe with a cloth. If there is no foil in the house, then add a teaspoon of any detergent to the soda solution and also leave the product at least overnight.
7. Light darkening can be removed using table vinegar. To do this, wet a cotton swab with vinegar and wipe the jewelry with a soft cloth.
8. An alcohol solution of borax will help you remove dark spots. To do this, gently moisten a cotton swab with the solution, wipe the product, leave for 10 minutes, rinse with water and wipe with a napkin.
9. Regular lipstick perfectly removes black spots from iodine, and all due to the fact that titanium dioxide is present in the composition of any lipstick. You need to smear a small piece of cotton wool with lipstick and wipe the jewelry.

Recipes for White Gold Jewelry

White gold is much more fragile and therefore, soft (gentle) solutions must be used for cleaning.

White gold is plated with a very thin layer of rhodium and is very easy to scratch.

“It is strictly forbidden to clean white gold with rough toothbrushes, all kinds of pastes and various powders.”

To clean white gold, use one of these recipes:

• For 50 ml of water, we need 25 ml of ammonia, then pour the resulting solution into any non-metallic container. Leave for several hours, rinse in water and dry.
• At 5 tbsp. l. beer, take 1 yolk, mix everything and wet a cotton swab with this paste and wipe the product.

Jewelry with precious stones

Jewelry with precious stones requires special handling, since many stones do not tolerate moisture well and should not be immersed in solutions. These products must be cleaned with cologne or alcohol. To do this, take a cotton swab, soak it in cologne and gently wipe the stone.

Cleaning Brushed Gold Jewelry

Brushed gold items should be cleaned with great care. The rules for cleaning jewelry are the same as for white gold jewelry, with a few additions:

• The ideal option would be cleaning in a 25% ammonia solution. To do this, the product must be filled with solution and left for 2 hours, then rinsed with water and wiped dry.
• Lime will help you clean matte gold. Mix a teaspoon of lime with a glass of water, add half a teaspoon each of soda and salt, leave this mixture in a dark place for 3 days. Then pour this solution onto the product for 2 or 3 hours, wash with water and dry.

Cleaning gold plated items

Some jewelry is only coated with a thin gold film. Such products must be cleaned with great care and delicacy. To effectively clean such products, it is necessary to wipe with a swab dipped in wine vinegar or beer.

Cleaning pearl jewelry

When cleaning items with pearls, it is strictly forbidden to use vinegar (the pearl may dissolve). You need to take a brush (you can use a brush to apply eye shadow) with a little shampoo, gently rub the pearl and rinse with warm water, then wipe dry with a soft cloth or towel.

Basic rules for wearing jewelry

• Before any homework, gold jewelry must be removed.
• Be sure to remove gold items before applying any cosmetic or medical products.
• You need to clean gold at home once a month.
• Protect gold from sunlight, in other words, store it in a box.

Chains and earrings, bracelets and rings - jewelry brings a whole sea of ​​pleasure. But the shine of all these “trinkets” can fade very quickly if you don’t make an effort. Learn how to clean gold at home and enjoy its beauty.

For cleaning gold rings and chains at home, you will certainly find these folk recipes useful!

Powder, ammonia and water

Cleaning with ammonia will take several hours, but your accessories will simply sparkle!

• Ammonia – 1 tsp;
• Water – 200 ml;
• Powder – 1 tbsp. l.

• Step 1. Pour boiled water into a deep plate.
• Step 2: Add laundry detergent.
• Step 3. Add ammonia.
• Step 4. Mix well.
• Step 5: Place the rings in water for about 2 hours.
• Step 6. Rinse and dry with a soft cloth.

Dishwashing liquid

Another good method that will allow you to cope with even severe dirt.

Hydrogen peroxide and liquid soap

• Water – 200 ml;
• Peroxide – 40 g;
• Liquid soap – 1 tsp;
• Ammonia – 1 tsp.

• Step 1. Warm up the water slightly.
• Step 2: Add all ingredients.
• Step 3. Pour the solution into a deep bowl.
• Step 4: Immerse the gold for about 20 minutes.
• Step 5: Rinse and dry them.

Salt

You can also clean gold jewelry with kitchen salt. It's very easy to do!

By the way, salt in this recipe can be replaced with sugar. The effect will be exactly the same.

Foil, soda and water

These simple ingredients, found in every kitchen, will make gold shine.

Borax solution

If your gold chain is very dirty, try cleaning it with this effective product.

• Step 1. Soak a piece of silk fabric in the borax solution.
• Step 2: Lightly polish the jewelry.
• Step 3. Rinse them and rub them until shiny.

Chalk and ammonia

Vinegar

How to clean gold without harm and without scratches? Take table vinegar, soak a clean cloth in it, wipe the dirty areas, rinse and dry.

Lipstick

Very unusual way, but quite effective!

• Step 1: Apply some light lipstick to the gold ring.
• Step 2. Walk it over the entire surface.
• Step 3: Polish the ring until it shines with a piece of velvet.

Onion juice

• Step 1. Squeeze the juice from the onion.
• Step 2. Dampen a napkin in it.
• Step 3. Wipe the jewelry, rinse in clean water and dry with a soft cloth.

Special cleaning paste

How to properly clean jewelry with stones?

Classic cleaning methods are not suitable for gold items with stones. And such products cannot be placed in water. You will need gasoline, cologne or alcohol.

• Step 1. Dip a cotton swab in any of these liquids.
• Step 2: Use smooth movements to clean the stones. It is better to do this with a rag, as sharp objects can damage the frame.
• Step 3. Wipe the jewelry with a clean cloth and dry.

How to clean gold with a matte surface?

Jewelry of this type is becoming more and more popular, but you need to take care of it very carefully. Powders and hard brushes are not suitable for these purposes. We advise you to stock up on lime and ammonia.

Ammonia

• Lime – 1 tsp;
• Soda - half a teaspoon;
• Water – 1 tsp;
• Salt is on the tip of the knife.

• Step 1: Combine dry ingredients.
• Step 2: Add warm water.
• Step 3. Leave the mixture for 3-4 days.
• Step 4: Place the gold in this solution for a few hours.
• Step 5. Rinse and dry.

14

Reader Recipes 25.04.2018

Dear readers, every woman, girl, and even men have gold jewelry. And many are familiar with the situation when, over time, the noble shine on jewelry disappears, small scratches become noticeable, and dust gets clogged between the inlaid precious stones.

How can we correct this situation so that jewelry continues to delight us every day? I propose today to discuss how and with what you can clean gold at home. Let's choose the simplest and most affordable means.

Why do you need to clean gold jewelry?

Gold - noble metal and he demands proper and careful treatment. As a rule, when purchasing jewelry, we do not think that we will need to take care of it. And before we start cleaning gold jewelry, let's find out the reason for its darkening.

Jewelers strongly recommend removing jewelry before visiting the sauna, during sports and physical activity, if you are at home. But even if the basic rules are followed, gold rings, earrings, and chains lose their original shine over time.

The shine of this metal is like a warm ray of sunshine, and it disappears with frequent contact with water, aggressive cleaning agents that contain iodine or chlorine. Even when in contact with cosmetics and perfumes, stains appear. Gold must be protected from mechanical damage. Dust gets clogged into small scratches, and the surface of the precious metal becomes rough and dark spots appear.

This problem can be solved with the help of specialists. But it is much more convenient and easier to use simple recipes cleaning gold jewelry at home.

How and with what to clean yellow gold

Chains, earrings, rings of complex shapes with engravings have hard-to-reach places that are difficult to clean mechanically (with a toothbrush, toothpick, napkin). In order to get to “secret” places, solutions that are simply prepared are ideal.

There are several recipes on how to clean gold at home quickly and without hassle. First, prepare a container, preferably glass, for this procedure. It should be deep enough so that the cleaning solution completely covers the jewelry and they are evenly cleaned. I suggest you get acquainted in detail with the most popular recipes. Let's look at options that are suitable for yellow gold.

Ammonia

How to clean gold with ammonia? Our mothers and grandmothers know this method well from Soviet encyclopedias of housewives. To do this, you need to dissolve one tablespoon of pharmaceutical ammonia in 100 ml of water and add a tablespoon of washing powder. After thoroughly stirring and dissolving the small particles, immerse your gold jewelry in the solution. After 2-4 hours, rinse the jewelry with water and place it on a napkin to dry naturally.

Hydrogen peroxide

The second most popular method is hydrogen peroxide. To do this, pour 1 tablespoon of liquid soap and a teaspoon of ammonia and 45 ml of hydrogen peroxide into a glass of boiling water.

The liquid should be mixed well and the jewelry should be placed in the container for 20 minutes. Finish cleaning the gold in the same way as in the first option: rinse with water and transfer to a napkin to dry.

Sugar solution

If you don’t know how to clean gold and silver with improvised means, use regular granulated sugar. To do this, you need to dissolve one tablespoon of sugar in 200 ml of water and lower the gold jewelry to the bottom. After 4-5 hours, take them out and rinse them under running cold water. This is how regular sugar can make jewelry shiny again.

Liquid dishwashing detergent

Dishwashing liquid can be used not only for its intended purpose in the kitchen. Liquid detergent effectively dissolves dirt, which is what you want to achieve when cleaning gold. To prepare the solution, pour 200 ml of water and one tablespoon of the product into a metal ladle.

Then the container must be placed on medium heat and brought to a boil. Then you can transfer the decorations that require cleaning to the ladle and continue boiling for at least 10 minutes. During this time, water bubbles will react with detergent and remove dirt from the most difficult to reach places. Finally, remove the jewelry, rinse it with cold water and wipe with gauze. This method is especially suitable for cleaning gold chains.

Salt

At home, every housewife has ordinary table salt, without which not a single dish can do. It can also be great for cleaning gold jewelry at home. The whole point is that salt It has pulling properties, which means that it effectively removes dirt from the surface of jewelry.

This method is as easy to implement as the previous ones. All you need is to dissolve 60 g of salt in 150 ml of boiling water. Place your gold jewelry in this solution and leave it overnight.

Cleansing using this method is slower, but more gentle. The next morning, all you have to do is rinse your rings or earrings with water and dry them.

Remember that you cannot rub jewelry with salt, as its small crystals will scratch the shiny surface of the products.

In addition to solutions with soap or alkaline agents, foil can restore the former shine and beauty of your jewelry. It's inexpensive improvised means, which is very easy to use.

Line the bottom of a deep container with metal foil. Pour 500 ml of boiling water and 50 g of baking soda into a container and place gold jewelry that requires cleaning there and leave it for at least 8-10 hours. In the morning, rinse your jewelry with water and wipe with a towel or cloth.

Toothpaste to restore shine

The list of available tools that will help if you don’t know how to clean gold to make it shine is quite long. One such product is toothpaste, which contains low abrasive substances and foaming components. It is due to this composition that the paste helps to carefully and carefully clean your favorite jewelry.

If you want to use this method, then take a soft toothbrush with a lot of bristles (you can’t use it for the oral cavity later) and apply a small amount of toothpaste. Start brushing your jewelry just like you would your teeth. The duration of home cleaning depends on the degree of contamination of the product.

Onion juice

This method has helped many housewives, although it is not so popular. Cut a medium-sized onion in half and rub the fresh cut over the browned garnish. This way you not only act on the metal with juice, but also carry out mechanical cleaning. Leave the jewelry in the rubbed state for 2-3 hours to enhance the effect, and then rinse with water and dry naturally.

Recently, in jewelry stores you can buy ready-made products for adding shine to gold jewelry. Among the most popular are the following manufacturers:

• “Talisman” – paste, liquid, napkins;
• "Aladdin" - solution;
• “Sunny metal polish” – cream paste.

As a rule, the price of such funds ranges from 300-500 rubles. Jewelers recommend using special means, when the darkening is too extensive and deeply ingrained.

The advantage of polishing pastes is that they contain no abrasive substances.

These cosmetical tools are made on the basis of Vaseline, water, vegetable oil, lead carbonate. This means that even with intense rubbing, the product will not be scratched.

In order to clean jewelry, you need to apply a small amount of paste to a soft brush and work the surface with rotational movements. After this, rinse the jewelry with vodka or medical alcohol to remove any remaining grease and wax, and leave to dry on a napkin.

If you are the owner of white gold jewelry, take a closer look at the following tips. White gold darkens faster than yellow gold. And in this case, the methods for cleaning jewelry that were described above will not work.

This is due to the fact that white gold contains several types of metal: copper, nickel, gold, palladium. The surface of the products is coated with rhodium, which is almost completely erased over time.

Given this composition, the care of white gold jewelry should be more gentle. Jewelers recommend cleaning jewelry with ammonia and then wiping with a soft cloth.

Leaving rings and earrings made of white gold in soda-containing or soap solutions is strictly prohibited, as this will worsen the condition of the metal and its appearance.

If you don't want to use aggressive pharmaceutical products, there is an easy way. To do this, add a tablespoon of ammonia and the same amount of shampoo to 100 ml of water. Mix the solution thoroughly and place white gold jewelry that requires cleaning into it. After half an hour, rinse the jewelry thoroughly and dry with a soft cloth. Remember that ready-made cream pastes and powders are not suitable for cleaning white gold, as this can damage the surface.

How to clean gold with stones

If you need to clean gold with stones at home, remember that gemstones come in different hardnesses. Based on these properties, it is necessary to select an appropriate method of cleaning from stains and dirt that will not damage the surface.

The stones are attached to the products using a special glue that dissolves under the influence of hot water.

Cleaning items with stones

Gold products with durable precious stones include: diamond, garnet, diamond, topaz, sapphire, emerald, zircon, ruby. Such jewelry can be cleaned with ordinary detergent, which must be diluted in warm water. Using a soft brush, go over the entire surface of the jewelry and then rinse.

If there are old discolorations, scratches can be used purchased funds. To restore the former shine of precious stones, jewelers recommend applying a small amount of alcohol to a cotton pad and massaging the gold item.

A clear diamond reflects light and sunlight better, so jewelry with this stone should be cleaned monthly. Many people do not know how to clean gold and diamonds and are afraid to do it themselves, fearing for the safety of the product. Solutions based on water and liquid soap are best suited for this purpose. An old toothbrush with soft bristles will help speed up the process. Remember that laundry soap causes the diamond to darken and worsens the color of gold and platinum.

Jewelers recommend using another method to clean gold with ammonia. To do this, add 6 drops of ammonia to a glass of cold water (200 ml) and immerse diamond jewelry in it for 30 minutes. After half an hour, take out the jewelry and cotton swab Wipe around the stones and the back of the frame. Then you need to dip the gold into the solution again for a few seconds and blot it with a napkin.

Malachite, amber, pearls, turquoise, moonstone, opal, and coral are fragile and require more delicate care. Items containing these jewelry cannot be cleaned with toothpaste, especially with a highly abrasive, hard brush. In order to remove accumulated dirt and add radiance and a noble shine, it is recommended to purchase disposable wipes with special impregnation at a jewelry store.

You can also clean such jewelry at home using a soap solution and soft fabric. In this case, it is not worth leaving the products in water for several hours, since many stones do not tolerate high humidity.

Jewelers warn that gold jewelry with natural pearls Do not clean with vinegar, as the acid will corrode the gemstone. The same prohibition applies to ammonia. And in order to quickly restore the shine of the product, moisten a cotton swab with medical alcohol and wipe the surface with quick movements.

How to clean gold plated jewelry

In jewelry stores you can see a large selection of products made not from standard gold, but only coated with plating. Experts remind that the surface of such jewelry is most susceptible to scratches and darkening and requires appropriate care.

Gold-plated items cannot be cleaned using standard methods that are safe for yellow gold. It is recommended to wipe them with a cotton pad soaked in beer or wine alcohol. Some housewives share their successful experience of using raw egg whites to process jewelry. A weak vinegar solution can also be used to clean gold-plated jewelry. To do this, wipe them with a cotton swab and then rinse them under running cold water.

I hope you found these tips helpful on how to clean gold when it has turned dark at home. All these methods are quite simple to implement. If you follow the basic recommendations of jewelers, gold jewelry with or without precious stones will delight you with its brilliance and beauty for many years.

Dear readers, do you clean gold jewelry yourself? Share your proven methods.

And for the soul, we will listen to you today S ongs From A Secret Garden. This beautiful music was written by Rolf Lövland. - Irish-Norwegian duo performing Celtic and neoclassical music. Everything is so insightful...

see also

Miracles on New Year in my life Corns on my feet. How to get rid of corns at home