How to knit a men's hat with knitting needles? With pleasure! A knitted hat, especially a men’s hat, keeps the warmth of your hands, is worn for a long time and with love, each time reminding the owner of you. A man's hat can be with a pom-pom, pimply or with a smooth crown.

You will need yarn (preferably wool blend, so that it is pleasant to the face), 100 g 170-180 m. You can take BBB Full, merino extra. It took me exactly 100 g without the pompom. Circular (or sock) knitting needles No. 3.5 for the elastic band and No. 4 for the hat itself.

We cast on knitting needles No. 3.5 100+1 stitches for any head, leaving a double tail when casting on for the beauty of the edge and so that it does not stretch out. We knit in the round with an elastic band, 1 knit, 1 purl, classic 12-12.5 cm.

We knit the next row with knit stitches and increase in every 4th stitch (+26 stitches). There are now 126 stitches on the needles. We make increases like this: we knit 2 from 1 loop: first behind the back wall, then behind the front.

Our hat will have 18 braids.

Switch to needles No. 4 and knit *6 knit stitches and 1 purl stitch* to the end of the row.

Twists in braids in every 4th row THROUGH THE BRAID! How to make twists: remove 3 loops onto an auxiliary needle before work, knit the next 3 and then knit loops from an auxiliary needle.
To make a beanie hat, we knit 27 cm (including elastic) for an adult and 25 cm for a child. If you need a hat on your head, then it will be enough to knit 20-21 cm before decreasing.

Men hat. Top of the head.

You need to finish knitting next to where you overlapped the braids (it doesn’t matter which braids were overlapped).
1st row - according to the drawing.
2nd row - knit 2 2 times in braids, so that each braid has 4 loops instead of 6. Purl all of them.
Row 3 according to the drawing.
Row 4 - 2/2 overlaps in the desired braids, see the picture for yourself
Row 5 according to the drawing.
Row 6 - 2 together in a braid 2 times = 2 loops will remain where there will be no overlap of the braids. That is, we look at where we need to overlap next time and DO NOT make any reductions there.
Row 7 overlap 2/2 in the desired braids.
Row 8 - according to the drawing.
Row 9 - 2 together in braids where overlaps were made.
Row 10 - we have 2 loops left in the braids and 1 purl loop each. We knit 1 knit and 1 purl together.
Row 11 - all 2 together
Row 12 - 2 all together and pull together with a thread.

If you make a pimp on the top of your head,

then decrease 2 loops together until 4 loops remain. We knit a pimplet from them by knitting 5-7 rows using this technique. Pull the last loop through the previous 3, pull it off, tear off the thread, fasten, hide the tip inside the pimplet or on the wrong side of the hat.

Knitting pattern for a hat.

It shows the complete knitting pattern for the crown, and the elastic is shown in only 2 rows, and repeat rows from 4 to 19 several times. I have 4 times.

You can add a pompom. Tie the pompom at a distance of about 5 cm. This hat will suit anyone. It can be a children's hat, both for girls and boys, and a teenager's, and a women's, and a men's hat. A lot depends on the yarn, color, and length of the hat.

How to knit a men's hat with knitting needles. Option #2.

You will need 100 g of yarn (I have BBB New Master, 80% merino wool, 20% acrylic), circular or sock knitting needles No. 4 and No. 5

We will knit in the bottom in the round.

How to knit a men's hat with knitting needles. Description

On needles No. 4, cast on 80 loops + 1 loop to join the circle so that the transition of the rows is not visible. We hang a marker to indicate the beginning of the row. Rib knit 1 knit, 1 purl. The purl loops are classic, so that when you turn the lapel, the knitting is the same. Having knitted 6 rows, add a thread of a different color and knit 3 rows with it. We return to the main color yarn. Having knitted 12 cm with an elastic band, we switch to knitting needles No. 5.

Next row we knit all the loops and make increases, knitting 2 from every 10th loop (one loop is knitted behind the back wall, the second behind the front). There are 88 loops in total.

Top of the hat

We will knit according to the pattern, and knit 3 loops together like this: slip the first 2 loops onto the right knitting needle, knit the 3rd loop, and then put 2 loops on it from the right knitting needle so that the middle loop is on top.

Pull the remaining loops, cut the thread, fasten and hide on the wrong side.

This hat is knitted for a large head.

A hat for a boy is knitted in the same way. Knit the sample using stockinette stitch. Calculate the required number of loops. This will be the number of loops for the elastic. For the pattern to be beautiful, the number of loops after the elastic must be divided by 22 without a remainder. You can use thinner knitting needles.

Option #3. How to knit a men's hat with knitting needles. The hat is universal.

Suitable for almost any head size. Depending on the color, it can be either women's or children's.

I recommend an excellent video MK.

The only other thing I can advise is to start the row not with 3 knits, but with 2 knits, so that the marker doesn’t get in the way when you overlap the braids. That is, shift the rapport: knit 2, purl 2, knit 3, purl 2. The same 9 loops, but at the beginning of the row it will be more convenient to knit.

How to knit a men's hat with knitting needles. For beginners. Option number 4.

Yarn ALIZE SUPERLANA KLASIK 100 g = 280 m 1 skein, circular knitting needles No. 3. Hat size 58.

We cast on the knitting needles 120 loops. We knit with an elastic band * knit 2, purl 2 * in a circle of 21 cm.

crown

Divide the number of loops by 5 and hang markers. We knit according to the pattern.

Cut the thread, fasten, hide.

How to knit a men's hat with knitting needles. Option #5.

You will need: yarn ALIZE SUPERLANA RLASSIK 100 g = 280 m 1 skein, circular knitting needles on short fishing line No. 5

Description

We cast on 72 loops. We knit with an elastic band * knit 2, purl 2 * 18 cm. This is a lapel. If you need a narrower lapel, then knit less.

Now the pattern.

We will knit it from 18 loops. Let's start with the facial ones. Decide on a place, hang up a marker.

A hat for a man can be knitted using simple patterns. Interesting designs hats are listed in this article.

Circular knitting needles are intended to simplify the knitting process as much as possible. They are connected by a rope or fishing line that holds the yarn. Circular knitting needles allow you to knit a product without seams.

For knitting you can choose absolutely any pattern of the product and any thread. The hat should be knitted using “declining stitches”, that is: the closer you are to the “bottom” of the hat, the fewer loops you should cast on.

Simple patterned hat with geometric motifs Any man will like it. She will correspond to sporty and business style. Product self made always distinguished by originality and quality.

For men's beanies should choose specific thread colors: black, dark blue, blue, gray or white.

Scheme No. 1

Scheme No. 2

Video: “Men’s hat”

Men's hat with knitted lapel: diagram and description

Hat with a lapel - classic version headdress. Its advantage is that it suits almost every face shape. Hat with a lapel - fashion accessory modern man. Most often her decorated with either patterned knitting or a decorative pompom.

Men's cap with lapel for men accepted knit from dark colors thread, or bright (more youthful style). Execute the pattern on such a hat it is very simple with the help rib knitting. As a result, the product will sit tightly on the head and look very stylish.

Scheme:

Option with lapel No. 1

Option No. 2

Video: “Men’s hat”

Men's beanie hat: how to knit?

The beanie hat is the most popular, both among young and mature men. This is a stylish element of a modern wardrobe, which with corresponds to sporty and even business style.

A cap has an unusual shape: it sits tightly on the head (forehead), and the rest of it hangs freely back. In addition, such hat design allows you to tuck it inside, or make a “stand” (raise the baggy part up if the knitting is “tight” and dense).

Beanie hat will perfectly complement scarf “collar” or “snood”. The hat can be knitted either in simple garter stitch or decorated with patterns: braid, zigzag, geometric figures, stripes, color drawings.

Men's beanie, diagram

Video: “Beanie hat for men”

Men's chess hat knitted: diagram with description

One of the most popular patterns for knitting men's hats- this is “chess”. This pattern looks like a checkerboard combining loops with fragments and: knit with purl.

Knitting a pattern is not difficult, and the result is always pleasing: the hat turns out dense, warm, voluminous and beautiful. It suits most styles: sports, street, business. Decorate ready product You can use a pompom or knit a hat with a lapel.

Hat with a checkerboard pattern for men, diagram

Video: “Checkerboard pattern”

Knitted men's stocking hat: diagram and description

Stocking hat It has a very peculiar baggy shape. It has a loose knit, the product itself is long, which allows the hat to hang on the head."Stocking" suggests that it can be convenient to tuck back by making a fold or leave it hanging freely.

Stocking hat Unlike the “beanie”, it cannot be placed upside down. This hat matches a loose, sporty or street style. “Stocking” is very popular among modern youth. Perfectly complemented by a double wrap scarf or a cowl scarf.

You can knit a hat using simple garter stitch, satin stitch, or add volume to it using patterns. The best patterns to use are “rubber band”, “checkerboard” or small braids.

Stocking hat for men, diagram

Loose stocking hat

Video: “Stocking hat”

Men's hat with knitted pompom: diagram and description

Hat with pompom - a stylish element of a modern wardrobe. The hat is very popular among teenagers and young adults because it decorative element, like a pompom, adds playfulness to a person. The product can be knitted using any technique. Practically any style of hat“accepts” the pompom.

Depending on your preferences, choose a large or small “ball”. A pom-pom can be made from thread, or you can sew a piece of fur into a lump.

Men's hat with pompom, diagram

Video: “How to make a pompom for a hat?”

Men's earflap hat with knitting needles: diagram and description

Hat with ear flaps" - one of the warmest hats, which is popular among modern men. The advantage of a hat is that it covers more than just the head, but also reliably protects the back of the head, ears, half of the cheeks and even the chin.

A cap relevant in winter time of the year and in severe bad weather during frost, cold wind and snow. Knit a hat like this can be crocheted and any size knitting needles. For this you will need wool yarn and a detailed diagram with the number of loops. If desired, you can decorate your earflaps with a bubo, or with a fur insert on the ears, which is sewn on with thread.

Scheme:

Knitting pattern

Hook pattern

Knitted earflaps for men

Video: “Knitting a hat with earflaps”

How to knit a double men's hat with knitting needles?

Double hat is a headdress knitted in such a way that The front and back sides have an attractive even knitting. Thus, you can wear a double hat in any way, changing shades as desired (if you knit with contrasting threads).

Double sided pattern can be made on a hat of absolutely any design and shape.

Scheme:

Pattern No. 1

Pattern No. 2 and No. 3

Men's knitted hats with ears: diagram and description

Hats with ears are very popular because made in a classic sports style. You can knit such a hat with plain or multi-colored threads. In any case, the product will look very stylish and fashionable.

Also, such a headdress can be decorated with a large or small pom-pom, ornament or even pattern.

Scheme:

Detailed diagram

Simple scheme

Men's hat with ears

Men's hat “Zigzag of luck” with knitting needles: diagram and description

One of the most fashionable patterns for knitting a men's hat is “zigzag”. This pattern makes the product voluminous, interesting, and dense. The hat reliably protects your head from the cold.

If desired, you can decorate the finished product with a pompom or a patch with an inscription.

How to knit a men's hat with a zigzag pattern?

Video: “Zigzag hat of luck”

How to knit a men's hat with a visor: diagram and description

Hat with visor - Another classic version of a sports hat for men. IN in this case The visor serves only a decorative role and practically does not protect the eyes from the sun.

A hat with a visor is ideal for kids, teenagers and mature men who follow a street and casual clothing style. You can knit a hat with plain, contrasting or melange threads.

Scheme

Video: “How to knit a hat with a visor?”

Men's hat made of thick yarn with knitting needles: diagram and description

Thick yarn very popular in modern knitting. It is original in that a thick thread consists of many small threads. The knitting process produces fairly large loops. That is why the product is easy to knit, but looks impressive.

In a modern store you can buy yarn of different colors: plain, gradient, melange.

Weave pattern and chess pattern Volumetric and colored patterns on hats

Simple satin hat

Video: “Knitted men’s hat”

Feminine flared jackets, elegant men's coats, children's raincoats and cardigans have come into fashion. Cute hats will help complete the look with patterns, pompoms or “ears”.

Clothing stores offer many models of hats - men's, women's, children's. However, it is worth spending time and money to find an accessory that matches your overall look. Needlewomen can save money and at the same time knit suitable items for the whole family. stylish hats. The main thing is to understand all the intricacies of the circuit and understand the general principle of operation. How to knit a hat with knitting needles. You will find knitting patterns for women's, men's, and children's hats with descriptions in this article.

We knit a hat for women and men

Before knitting, you need to choose the right yarn and knitting needles. Yarn depends on the season and model. Winter hats are knitted from yarn with a high wool content, spring hats are knitted with acrylic. Bulky yarn is suitable for models with large patterns and coarse knitting. Thinner yarns are well suited for tight knitting with small patterns.

Hats are usually knitted on circular needles - this way the product will turn out smooth, no seams. The elastic band is knitted on thin needles for density. When moving on to knitting the base, you need to change the knitting needles to thicker ones and add loops.

In addition, you will need markers to mark the beginning of the row and the loops needed when working, as well as a needle, hook and an additional curved knitting needle for braided patterns.

Before you choose and start knitting a suitable model, you need to understand a few general rules, which will be needed when knitting any hat.

How to add stitches on a hat using knitting needles

Usually the increase is made in the next row after the elastic band, so that the product is held more freely (especially when knitting berets). Increases are made in 1-2 rows depending on the model.

You can add loops in the middle of the row different ways. The most convenient methods of increasing are from the previous row and using a yarn over.

You can make a loop from the previous row from a broach, that is, a thread between two loops, or from a loop from the previous row. The broach is thrown onto the left knitting needle and knitted - an additional loop is obtained.

How to knit a hat with knitting needles. Knitting patterns for women's, men's, and children's hats with descriptions are not difficult to find. The main thing is to understand all the intricacies of the circuit and understand the general principle of operation.

If you pick up, pull out and knit a loop from the previous row with your left knitting needle, you will also get a new loop. This will happen most unnoticeably - it will be difficult to find places for increase in the overall mating.

Using a yarn over, a loop is made on the front side: pick up the thread with the right knitting needle and continue knitting. In the next row, knit the added loop behind the back wall of the purl. Otherwise, the addition will stand out as a small hole between the threads.

Hat in stockinette stitch (garter stitch) with knitting needles

Beginners knit simple hats using stockinette stitch or garter stitch. This is the most simple ways work.

Knit stitch involves alternating rows of knit and purl stitches. The canvas will have a smooth vertical pattern on one side (front side), and a pattern in the form of transverse waves on the reverse side (wrong side).

Garter stitch is done exclusively with knit stitches, regardless of the side. The result is simple relief pattern.

Note! The stockinette surface tends to curl up at the edges. To prevent this from happening, first knit an elastic band. You can also “secure” the edges by crocheting them.

How to finish a hat with knitting needles

After the hat is knitted to the desired length, you need to start narrowing the crown. To do this, you need to decrease a few loops in the following rows.
Decrease - knitting two loops together. As a rule, when knitting a hat, rows with decreases alternate with rows knitted according to the pattern. This reduces the number of loops through which decreases are made.

For example, first every 10 loops, then every 9, then every 8 and 7 loops. When there are no more than 20 loops left, pull the thread through them and pull off. This completes the knitting of the hat.

Knitting patterns for hats: diagrams and descriptions

There are a lot of knitting patterns. Looks good on hats various braids, braids, diamonds, “bumps”, “leaves”. Also, the main fabric of the hat can be knitted not only with satin stitch, but also with a certain pattern, for example, “rice” or “honeycomb”.

“Rice” is a simple pattern that makes the product airy and embossed. “Rice” is used to knit not only hats, but also snoods. The pattern suits both bulk yarn, and for thin.

The knitting principle is very simple: the front stitch alternates with the purl stitch. In the next row, the knitting changes: knit is knitted purl, purl is knitted.

“Honeycombs” are knitted with a thread thrown over. To do this, you need to cast on an even number of loops. Knit a knit stitch in the 1st row, then put the thread on the right knitting needle and remove the loop from the opposite knitting needle, repeat the rapport to the edge.

The second row is created like this: purl, throw the yarn over onto the right knitting needle, knit 2 loops, transfer, knit 2, etc. Row 3: yarn over, remove the loop, knit together with the yarn over, repeat the rapport to the end. 4th row: knit 2, yarn over, repeat again until the edge. Row 5: knit a yarn over and a loop, slip a double crochet, repeat. 6 knit like 2. From the 7th row, the repetition of rapport begins - rows 3-6.

“Braid” is the most common pattern for hats and the simplest, especially for beginners. For this you need to prepare an additional short knitting needle.

As an example, cast on 14 loops in the usual way and knit rapport:

• remove the edge;
• purl 2 stitches;
• knit 8;
• knit the remaining loops purl;
• repeat steps 1-4 3-4 times (the length of the braid depends on the quantity);
• repeat step 1-2;
• throw 4 loops onto a short knitting needle and leave before knitting;
• knit 4 knit stitches of the row;
• return the loops from the knitting needle to the left one and knit them with knit stitches (if convenient, you can knit them immediately with an additional one);
• finish the row by knitting the purl loops;
• repeat rapport (points 1-9).

Note! The number of loops must be even so that the loops can be equally divided into two parts.

Braids can be knitted different lengths and width, as well as tightly to each other or through purl loops, depending on the model and yarn. Denser and thinner braids are knitted in 3-6 rows on 4-8 loops. Wide braids are best knitted every 10-15 rows on 10-14 loops.

There are many other warp knitting patterns. When choosing a pattern, you need to pay attention to its density: the denser the pattern, the better the heat will be retained, which is important for winter hats. Summer and spring hats allow mesh or openwork patterns(“ladder”, “shells”, “peacock tail”, “leaves”, etc.).

How to knit a winter hat for women (with description)

Winter hats are denser, softer and more voluminous than spring hats. To knit them, you need yarn containing at least 50% wool (alpaca, merino, camel, sheep). To add volume to knitting, you can fold thin threads 2-4 times.

Takori hat made of mohair knitted (knitting pattern)

A takori-style hat can be considered a universal model, since it can be worn in different variations: as a stocking cap, with one or more cuffs. Takori is a very soft and voluminous hat. This pattern is knitted quite simply with English rib and will appeal to beginning knitters.

To create a takori hat you will need Angora yarn (100 g/500 m), 4.5 mm circular knitting needles (can be knitted on two knitting needles), markers, and a large knitting needle.

The thread is folded in half(the beginning and end of the ball are connected) and 70 loops are cast on (head circumference 56-58 cm).

Knit rapport: yarn over, remove loop, knit, repeat. All even rows - yarn over and the loop behind it, purl, yarn over, remove the loop, etc.

Alternating rows, knit to the desired length (approximately 32 cm), and then change to a 1x1 elastic band: knit a loop with a purl crochet, 1 knit and then in the circle. Subsequent rows (about 3 cm) are knitted according to the pattern.

Work through a decrease row, knitting every 2 stitches together.

Cut the thread about 10 cm from the needle and thread it through the needle. Pull the loops and secure the thread.

Knitted hat with a lapel

A classic hat with a lapel is knitted with an elastic band 1x1 or 2x2 (knit and purl). After knitting 5-7 cm with an elastic band, you need to change the knitting in a checkerboard pattern: knit the front loops with purls, and the purls with the front ones. In this way, a line of inflection of the lapel will be outlined, along which the edge can be folded. Continue knitting with an elastic band for another 5-7 cm.

Important to remember! An elastic band made from soft yarn stretches well, so it is important to make it the size of your head or a little narrower.

When the elastic is completed, you can move on to the main part of the hat and knit it with the desired pattern.

Double knitted hat

This is a warm two-layer hat. There are quite a lot of options. The easiest way is to knit in satin stitch on stockinette and circular needles, starting from the crown. In essence, you should end up with a stocking closed on both sides.

Roll the thread into a ring and, inserting the knitting needles through it, cast on 12 loops, 3 loops on each knitting needle. You can also type it in the usual way, but then you will get a small hole in the middle. Knit a row with knit stitches.

Increase 8 stitches per row 12 times: 1st row - knit, increase, knit, increase, knit (so on each knitting needle). Subsequent even rows are knit rows. Row 3 – knit, increase, knit 3, increase, knit, etc. (inc on each needle after the first and before the last stitch). The result should be 4 wedges.

Once 24 rows are knitted, change the knitting needles to circular ones and start knitting in satin stitch 122 rows, marking the wedges and the edge of the row with markers.

Decrease (guide by markers) 12 times: row 1 - knit, slip, knit, throw the previously removed loop over it, knit to 3 outer loops (to the marker), 2 together, knit, etc. There are 24 rows in total.

Tighten the last 12 loops with working thread.

Knitted thick yarn hat

Simple hats with a simple pattern are knitted from thick yarn quite quickly. Thick yarn is considered to be skeins weighing 100 g and no more than 140 m long. Accordingly, you will need large knitting needles from 8-10 mm depending on the thickness of the thread.

Typically, 30-40 loops of thick yarn are cast on knitting needles and knitted in the round using garter stitch, ribbed stitch or satin stitch. There is no need to make any additions; the classic subtractions are made.

Knit a hat for spring with knitting needles for a woman - new models

In spring, you can get creative and knit not only warm ones, but also beautiful models hats

Knitted turban hat

A simple turban is knitted with an English rib 1x1 in one piece approximately 12x90 cm (you should get a narrow scarf). Having knitted the scarf to the desired length, close the loops in the usual way. Then the finished fabric is collected into a turban and stitched.

Try the scarf on your head, wrapping it like a turban. The middle of the scarf is the back of the head, the two ends cross each other on the forehead and bend back. To understand which sections need to be sewn, it is recommended to mark them with pins.

The edges are sewn through the side loops at the back and on the sides on the wrong side.

Important to remember! To correctly calculate the size of the hat, you need to knit a sample of 10 loops for 10 rows, wash, dry and measure.

Women's hat knitted with description and diagrams

Knitting a beret from a hat is distinguished by mandatory increases in 1-2 rows after the elastic band. This will help expand the knitting to the desired diameter.

The elastic band of the beret should fit snugly on your head.. As a rule, it is knitted 1x1 or 2x2 and has a length of 2-7 cm. After 5-6 rows from the elastic, uniform decreases are made.

Hat with English rib (2x2) knitted

It's pretty simple model, similar in design to a takori hat.

You will need a relatively thin thread containing acrylic, for example, Alize Lanagold yarn (100 g/240 m), as well as 3.5 mm circular knitting needles and a needle.

How to knit:

1. Cast on a multiple of 4 stitches on the needles.
2. Knit according to the classical principle English gum, but knit 2 loops each: 2 knit stitches, 2 slipped double crochet stitches, next row - according to pattern, etc.
3. Having knitted to the desired length, switch to 1x1 elastic: knit knit, 2 together with knit yarn over, purl and then in the round.
4. Knit the next rows according to the pattern(5-6 cm).
5. Make decreases as when knitting a takori hat.
6. Thread the cut thread through the needle and pull it through all the loops.

Knitted hat with braids (diagram)

There are many options for this model. In a simple, classic hat, braids of 4-6 loops are separated by 2-4 purl loops.

Cast on a multiple of 2 stitches on the knitting needles and start knitting 2 knits, 2 purls (2x2 rib) in the round. After 5-7 cm of knitting, change the knitting needles to thicker ones, switch to satin stitch and add loops every 3 loops.

To knit repeat for braid: knit 6 knit stitches, 3 purl stitches, 6 knit stitches, etc. After knitting 4 rows, knit the braid on the front loops, and then repeat the rapport from the beginning.

Having knitted to the desired length, make decreases: knit every two loops together, then knit 2 rows according to the pattern, then decrease again, knit a row according to the pattern, 2 rows - decreases. Pull the last loops together.

If you alternate through an equal number of rows of braids with a knitting needle behind and before knitting, you will get a “braid”. For example, one row - 120 loops, one braid consists of 12 loops, respectively, around the hat you will get 10 wide braids.

10 rows are knitted in satin stitch, then a row with braids is made: remove 6 loops on the third knitting needle and put away for work, knit 6 loops of the row, and then loops from a short knitting needle. This is how the whole row is knitted. After the next 10 rows of satin stitch, the order changes: 6 loops on the auxiliary needle remain before work, and so on.

It is important to know! Braids slightly compress the diameter of the hat, so you need to add a large number of loops in 1-2 rows (there can be 15-40 increments in total) so that the braid does not interfere with putting on and taking off the product. After knitting a row “obliquely”, you need to try on the future hat: the pattern should not compress the head.

Knitting pattern for a Kubanka hat for women (with description)

The Kubanka hat is a rather original model, distinguished by its rectangular shape.. The complexity of this model is that when moving from the crown to the bottom of the cap, it is necessary to tie a roller.

For size 57, cast on 4 mm needles for 130 stitches. Knit approximately 4-5 rows with a 1x1 elastic band, and then, without adding loops, proceed to knitting the main part of the hat up to the crown (you can make a suitable pattern).

Make a roll by knitting 8 rows with a 1x1 elastic band. It is necessary to connect the 1st and 8th row: pick up the loops from the first row of the elastic band and purl each loop of the 8th row.

Divide the number of loops into 7 parts, set markers - guidelines for decreases. Continue knitting in satin stitch, decreasing 7 stitches in each front row (knitting without decreasing on the purl side). The result should be 7 wedges. Tighten the last loops with thread.

How to knit a fashionable hat for a girl with knitting needles

As a rule, all hats are knitted according to the same principle. However each model has its own characteristics, which can cause difficulties when knitting.

Knitted hat with ears

Darling simple hat with ears it is knitted in garter stitch in the round or like takori: with English or classic elastic, but is not closed with decreases. Having knitted the hat above the crown, you need to close the loops in the usual way. The result is a pipe open on both sides.

Ears are made from the upper edge of the “pipe”. To do this, you need to sew the top of the hat, starting from the center, from the wrong side (connect the wrong loops together). To make the ears stand out more clearly, you can sew the corners diagonally, separating the ears from the main part of the hat.

Beanie hat (stocking) knitted: knitting pattern

This is a simple pattern that even beginner needlewomen can handle knitting. Usually the “stocking” is knitted in garter stitch without patterns. This model differs from all others in its rounded top and rather long length (the top of the hat should fall off the head).

To knit this model you will need thick yarn, for example, “Nako Jersey” (100 g/74 m) or Trinity yarn “Melody” (100 g/100 m), 6-7 mm knitting needles, and a needle.

The stocking cap is knitted in vertical and short rows. To do this, you need to cast on 45 loops on one knitting needle (along the length of the hat) and knit 40 loops. The remaining 5 loops are not knitted and remain on the right needle.

Unfold the work and knit in reverse side garter stitch. In the 3rd row, knit 41 loops, leaving 4. In the 5th row, 42 loops are knitted, in the 7th - 43 loops, in the 9th - 44, in the 11th - 45. From the 13th to the 22nd row, knit stitches are knitted. The 23rd row is knitted as 1 and further (rows 1 to 22 are repeated). The result should be a wedge.

Note! The upper part of the beanie should be slightly narrower than the lower part due to the wedges.

Repeat knitting until the desired width is achieved (5-7 wedges). After last row the working thread should be at the top (if this is not the case, knit another row). Close the loops with purls, cut the thread, leaving 15 cm. Pull the thread through the needle and sew the hat lengthwise (bottom to top). At the top, thread the needle through the purl loops in a circle and pull off.

Knitted pumpkin hat

The model has a pointed top. You can wear this hat with or without a lapel.

How to knit:

1. Cast on loops to size.
2. Knit in an elastic pattern of 2 knits and 3 purls.
3. Having knitted to the top of the head, make decreases in the circle on the purl loops: 1 purl, 2 together, etc. (you will get a regular 2x2 elastic band, knit according to this pattern for about 7 cm).
4. Make decreases on purl stitches (1st row).
5. Knit a row according to the pattern (2 knits, 1 purl).
6. Pull the thread through last stitches and pull it off.

Gradient knitted hat

Gradient hats look unusual due to the smooth transition from one color to another. The secret of this knitting is that a second color is gradually added to a thread of one color.

In order for the transition to be smooth and not contrasting, it is necessary to prepare a thin thread and fold it 3-10 times depending on the thickness. Having knitted the bottom of the hat, begin to gradually replace the threads with a different color: first change 1 thread, then 2, 3 and so on until all the threads “change” color.

You need to mentally calculate when to change the color. For example, if the working thread consists of 3 threads, then you need to mentally divide the hat into 4 parts: part is knitted in one color, part with 1 thread of a different color, part with 2 threads, part with a different color.

Knitted hat with pompom

The pompom beautifully complements the hat and can hide minor imperfections on the top of the head. The simplest pompom can be made using cardboard “donuts” or a special circle.

Cut out 2 circles from cardboard with round holes in the middle - “donuts”. Cut the threads about 50 cm long and start wrapping them around the cardboard in a circle through the middle. For convenience, when the central hole is tightly wrapped with thread, you can use a needle.

The tightly wound threads are cut in a circle (the cut is made along the edge) to the cardboard. Move the cardboard rings slightly apart so that you can conveniently pull and tie a skein of thread in the middle. After this, the rings are removed or cut, and the pompom is formed into a ball. Protruding threads and irregularities can be trimmed with scissors.

Knitted men's hat (diagram with description)

There are models of hats that are more suitable for men than for women, for example, a hat with earflaps or a hat-helmet.

Ushanka hat knitted

Hats with earflaps, depending on the thickness of the yarn and lining, can be either winter or demi-season. The main difficulty in performing this model is tying the “ears”. This is where knitting begins, so that the hat turns out smooth, without seams.

Interesting fact! The prototype of the usual hat with earflaps is the army cap of the White Army. Initially, it was exclusively a men's headdress.

A simple one-sided hat with “ears” is knitted in garter stitch (can be knitted in satin stitch). To work, you will need yarn of medium thickness (for example, 100 g/120 m), circular and regular knitting needles 4-6 mm, and a needle.

First, cast on 12 loops on the knitting needles and knit 8 rows, adding 1 loop at the beginning of each row in the usual way. Knit 14 rows without increases. Cast on 8 stitches at the beginning of the row and knit 20 rows. Knit the second “eye” in the same way.

Cast on 22 loops and knit the visor 4 rows, adding 2 loops at the beginning (there should be 30 loops on the knitting needle). Next, knit 24 rows without increases.

Connect the knitted parts using circular knitting needles, knitting the loops of one “ear”, then the loops of the visor and the loops of the second “ear”, close the knitting into a ring. Knit in the round for approximately 36 rows.

Decrease evenly across rows of 7 stitches. When 20 loops remain, decrease in each loop (10 loops remain). Pull the thread through and tighten.

Knitted helmet hat

This pattern is quite difficult to knit, as it ties the head from the crown to the shoulders.

Usually, the helmet is knitted from top to bottom. First, stitches are cast on 4 double needles (8-12 stitches) and rows are knitted in the round with increases at the beginning and end of each needle. When the circle is large enough in diameter (around the head), you can switch to circular knitting needles and knit further in the circle without increasing to the forehead line.

Transfer the loops across the width of the face to a large pin and leave them, do not knit. Knit back and sides. When the length reaches the neck, cast on additional loops, close the circle and knit the neck. For the shirt front, cast on additional raglan stitches at the top and knit to the required width.

Tie the front part with an elastic band and close the loops.

Knitted sock hat

The men's sock hat is knitted like a women's beanie hat., that is, you can start from the side and knit in short rows.

There is another option: knit in the round with a thick 1x1 rib, and then divide the stitches in the row into 3-5 wedges, place markers and start decreasing through the row, focusing on the markers. Tighten the remaining loops with thread.

Hat made of thick yarn with knitting needles (knitting pattern)

From thick yarn for men, you can knit models similar to women's ones. The only thing difference - drawing and pattern. For men, a more strict, geometrically correct pattern will suit a coat or jacket.

Most men's hats large knit knitted with elastic bands, garter stitch, satin stitch, vertical braids.

It is important to know! Woolen items must be washed only by hand at a water temperature of no more than 30 degrees, including when rinsing. Wool clothing should not be twisted and can only be dried in a horizontal position. This will help avoid deformation of the product.

Children's hat knitted

Baby hats often resemble bonnets, meaning they cover the entire back of the head and are tied under the chin. This is the main feature of such models. Otherwise, hats for children are knitted according to the same principle as for men and women.

Knitted hat for a newborn

A simple cap for a newborn of any gender is knitted using satin stitch from acrylic or wool blend fine or medium yarn, approximately 100 g/150 m.

The cap is knitted on two needles as follows::

• cast on 42 loops;
• knit 2x2 rib for about 8 rows;
• switch to satin stitch and knit 22-25 rows;
• close the loops in the usual way.
• As a result, fold the resulting rectangle of fabric in half and sew the upper edges together through the edge loops. Sew a lace or rope of yarn to the bottom edges.

Knitted hats for boys (with description)

For boys, you can knit hats with earflaps with ties, helmets or regular hats with stockings. The hat can be decorated not only with three-dimensional patterns, but also with a jacquard pattern.

Knitted hat for girls

A simple hat for a girl is knitted in various patterns, both large and small knitting. The finished hat can be decorated with knitted flowers, beads or decorative buttons.

The easiest way to knit a hat is with an elastic band and garter stitch.. To do this you will need fairly thick yarn (100 g/100 m) and 7 mm knitting needles.

Cast on 72 stitches on circular needles and form a ring. Knit 2x2 rib for about 15 rows. Next, switch to a pattern of alternating 2 front and 2 back rows. Knit up to row 29.

From the 30th row, make decreases: in the 1st row - every 12 loops, in the 3rd row - after 11 loops, in the 5th - after 10 loops, etc. until 18 stitches remain. Pass the thread through the loops and pull off.

Owl hat for spring for a girl, knitted: diagram with description

A beautiful “Owl” hat with an ornament and “ears” is knitted on 4 mm circular needles with 100 g/130 m yarn.

First, cast on 64 stitches and knit 4 rows in satin stitch. Next, knit 2 rows according to the pattern: 26 with the wrong side, 12 with the front side, 26 with the wrong side. Starting from the 7th row from the beginning, start knitting the pattern on 12 central loops (the remaining loops are knitted purl). Knit even (purl) rows according to the pattern.

In the first row, alternate knit 3 and yarn over in the middle. In the 3rd row, knit 3 loops, then yarn over, knit 9 with “rice”, yarn over, knit 3. Rows 5 and 7 are knitted like 3, but in the middle knit 11 and 13 stitches, respectively, with “rice”. In rows 9-15, knit 3, knit 13, knit 1.

Rows 17 and 19 – knit 3, decrease, 7 “rice” (in 19 – 5), decrease, knit 3.

In the 21st row, make a braid on 6 knitting needles, leaving the extra one for work. Knit the front and again the braid on 6 loops.

In rows 23, 25 and 27, 13 stitches are knitted in stockinette stitch, row 29 is knitted like 21.

31 (33) row – 3 (2) knit, 7 (9) purl, 3 (2) knit. Row 35 – knit 1, purl 11, knit 1.

From the 37th row, knit the next 9 rows with purl stitch, and then bind off the loops and decorate the protruding ears.

Note! For children's clothing, it is necessary to select hypoallergenic yarn specifically designed for children. Typically, such yarn contains acrylic, merino wool or fiber. These materials do not cause irritation, clothes do not rub and lie softly on the body.

How to knit a beautiful, simple women's hat with knitting needles for beginners: a step-by-step guide

So, knitting any hat pattern can be divided into 5 main stages: elastic, increase, warp, decrease, close. Depending on the features of the models, some steps may be missing. For example, if you start knitting a hat with a 1x1 elastic band, and then switch to English or patent elastic, then you don’t need to make any increases - the knitting will turn out fluffy.

You can also skip the first stage, that is, start knitting immediately from the main pattern. If you immediately knit with satin stitch, the edge will most likely curl into a small roll - you will get an original lapel.

The general knitting pattern includes the following steps:

1. Cast on the number of stitches on stocking or circular knitting needles based on the size of your head based on the preliminary sample.
2. Knit an elastic band 1x1 or 2x2 5-7 cm (sometimes you need more or less).
3. Go to spokes bigger size(1-2 mm more) and make increases in the next row after the elastic band (5-40 increases).
4. Knit in the round with the main pattern.
5. At the top of the head, begin to close the knitting, evenly decreasing several loops in a row, alternating rows with decreases with regular rows according to the pattern.
6. Using a needle, pull the thread through the remaining 6-20 loops, pull and secure the thread at the top of the head.
7. Wash the finished product and dry it.
8. If desired, decorate the hat with a pompom (ready-made or homemade).

How to crochet a hat

A simple hat is crocheted from the crown using single crochets and gradually adding stitches. When the diameter of the head is reached, it is necessary to knit the hat to the end without any increases.

Knitting hats: models and patterns for free

In the educational video below you can see how to knit a hat.

Knitting patterns for women's, men's, and children's hats with descriptions are shown in detail in the following video clip. Look.

The presented models are a few of the many possible options for hats. Each needlewoman can come up with her own original model, draw a diagram, or combine two models into one. The main thing is to start knitting, and then the Internet, patience and acquired skill will tell you.

With the cold weather approaching, everyone wants to protect themselves from adverse weather conditions. A warm, reliable, knitted hat can serve as a good assistant for this. Men love to wear products made by caring people. with female hands. A men's hat is knitted from various threads according to different schemes. In this case, they can be used various techniques knitting. Schemes and descriptions of patterns for men's hats when knitting are worth considering in more detail.

Preparing for work

Many people wonder where they can find instructions explaining how to make men's hats with knitting needles with diagrams and descriptions. If you are going to start knitting a men's hat, you need to stock up on everything in advance the right tools and materials. Careful preparation for work will allow you not to be interrupted due to a lack of yarn or incorrectly selected knitting needles.

Selection of tools

Before you begin the process of knitting a hat, you need to stock up on knitting tools. Both straight stocking needles and circular knitting needles can be used. The number of knitting needles is usually selected depending on the thickness of the thread used. For an elastic and soft fabric that is pleasant to the touch, you should choose knitting needles with a diameter larger than the slightly twisted yarn from which the product will be made. If you need to make a hat from dense, windproof fabric, then you should use knitting needles of a smaller diameter.

Necessary materials

In order to select the necessary yarn to knit a men's hat, you should study the variety of market materials offered. Today there is a wide range to choose from, both natural, and synthetic threads for knitting. Speaking about natural materials, we should mention:

• wool (alpaca, angora, merino, as well as mohair, cashmere);
• cotton;
• hemp;
• silk;
• bamboo, etc.

Synthetic fibers include:

• microfiber;
• metallic;
• nylon;
• acrylic, etc.

It should be noted, what for knitting original products Mixtures of fibers can also be used, the most common of which are:

• wool mixture;
• mix fibers (chenille, pile yarn, etc.).

When buying yarn to knit a product, you need to decide how many threads you will need to make a hat. It is better to buy a little more yarn in advance than is recommended for the selected headdress model. Remains of yarn can be used if necessary to decorate or repair the product. Usually for a man's hat it is consumed, depending on head size and style, 100−200 grams of yarn.

If you liked the model of a knitted hat that you saw on someone or in a fashion magazine, this does not mean that it is ideal for your man. The choice of product model often depends on the shape and type of face of the owner of the headdress, as well as on the style of his clothing and preferred color scheme.

Depending on your face shape

Often, with the help of one or another style of knitted hat, you can both emphasize the advantages of your face and hide its shortcomings. Yes, for persons round shape Asymmetrical models are best suited, as well as hats with a pompom or earflaps, which visually hide the roundness of the face. For rectangular faces with a high forehead, beanie hats, stocking-shaped hats that can be lowered closer to the eyebrows, are great. A beanie hat is also perfect for owners perfect shape head, since it can be worn on the very top of the head, opening the ears, which is dictated by modern fashion.

Those with such an appearance feature as a long nose are recommended to choose knitted hats with a visor or lapel that allows you to smooth out the proportions of the face . Helmets also fit well with this type of appearance.

Influence of clothing style

For men who prefer a classic style of clothing, knitted hats with a similar style are suitable. In combination with a scarf, such hats will well complement the image of their owners.

For those who prefer a casual style, knitted hats are perfect, allowing you to create volume and asymmetry. . These include:

• hats and socks;
• beanbags;
• beanie hats.

For men using sport style even in everyday life, tight-fitting hats with a simple style are good. In addition, the sporty style implies the absence of knitted hanging elements and elaborate patterns.

Large knitted hats, as well as models of non-standard styles (with folds, pom-poms, lapels and ears), are very popular among informals. Non-standard images allow you to create the ears of various animals.

Suitable color

The color scheme when choosing a headdress may depend on the color outerwear, accessories, hair and eye colors, etc. So , black suits brunettes better and dark shades of the hat. And hats in bright colors will also look contrasting. Blondes will suit pastel-colored hats that match the color of their skin and eyes. For owners of red hair, knitted hats are suitable, emphasizing their fiery temperament and cheerful disposition.

It’s good to have hats of different colors in your arsenal, which will allow you to select the right ones depending on the type of activity, recreation or events you attend. In addition, a brightly colored hat can always cheer up not only its owner, but also those around him.

Step-by-step instructions for production

After choosing a style headdress, yarn and knitting needles of the required size, you can start making the product with your own hands.

Stocking hat

The knitting pattern for a men's hat with a description is quite simple. Model of this knitted hats will do both children and adults. It is good because, thanks to its loose fit, it creates a feeling of comfort. The knitting pattern for a stocking cap is as follows:

The product is ready. But before using it, you should wash the head unit and lightly steam it.

Helmet with ears

This model is knitted with the pattern “ garter stitch", knitting all rows with facial loops. The manufacturing stages are as follows:

The finished product must be washed, placed wet on an inverted three-liter bottle (to give it shape) and allowed to dry.

Beanie with chess pattern

This model of headdress fits well to the head. It is knitted on straight needles, so at the end of the work you will need to sew the edges of the hat from the top to the bottom of the product. So, the manufacturing steps are as follows:

To make the product warmer, you need to choose double fabric patterns. And you can decorate the finished headdress with a badge, embroidery of initials using the satin stitch technique, or a pompom - at your discretion. The main thing is to remember that making it yourself knitted hat It won’t take much time for a man, but he will feel the warmth of the hands and the care of a loving craftswoman.

Attention, TODAY only!

They say that men are not picky when choosing clothes. But, believe me, they will appreciate a headdress made with their own hands, which will be quite different from the factory stamping. Teenage boys who at that age want to stand out from the crowd will especially like this exclusive hat. In this article we will teach you how to tie different models hats for men and teenage boys.

The main thing in the article

How to knit a hat for a man or a teenage boy as a beginner?

If you are just starting to master the art of knitting, but already want to please your men (husband, son, brother, father) with a new headdress, then you will need:

• knitting threads (yarn);
• knitting needles, they can be circular, stocking, straight;
• ability to understand diagrams.

Knowing how to knit only two stitches - front and back, it is quite possible to knit a simple men's hat. The main thing is to choose yarn for the season:

• spring-autumn– acrylic, cotton, linen or silk threads;
• winter- wool, terry.

Now you need to choose the right knitting needles. This is quite easy to do, since all skeins of yarn indicate the numbers of knitting needles and hooks that are suitable for working with this yarn.

After preparing the knitting props, you can start knitting. Next, you need to follow the instructions, diagrams and descriptions that tell you how to knit a headdress. A selection of the most interesting models can be found below.

Simple knitted hats for men: patterns with descriptions

This hat can be knitted both in winter and for the spring-autumn season. The instructions are written for the size 60 model. To work you need to prepare:

• yarn – 150 g;
• circular knitting needles No. 3.

On circular needles No. 3, cast on 94 stitches. Knit with an elastic band 1X1 (alternately knit, purl). Raise the work to a height of 20 cm. Next, make four decreases, every 21 loops. They are made by knitting two loops together. It is reduced only on the front side.

When there are 12 loops left in the work, pull the yarn through them and tighten. Using the same thread, sew a seam at the back of the finished product.

Men's youth hat with knitted lapel: photo-schemes

For some reason, it is generally accepted that if there is a lapel, then it should be present on women’s hats. By the way, about knitting female models caps, read the article: ““. But note that men's hats with this attribute look very impressive.

Before you start working on such a model (size 54–58) you will need:

• stocking needles No. 7;
• yarn - 150 g, you should focus on yarn with 70% acrylic and 30% wool.

Cast on 16–18 stitches on each of the four working needles. Raise the work with a 2X2 elastic band in a circle.

When the hat is raised to a height of 25 cm, decrease 4 loops on all needles. The purl stitches are reduced, leaving two knit stitches, one purl stitch, knitted from two, etc. At the end there should be 48 stitches left in the work. Following the figure, raise two rows, then, using the same principle, cut off the front loops. It turns out that the work switches to a 1X1 elastic band.


Raise 2 rows according to the picture. Knit all the loops of the new row two together knit stitch. Again, two rows, according to the drawing, after - again knit all the loops in twos. As a result, there should be 8 loops left on the working knitting needles. Break the yarn and pull it through the remaining loops, tighten, and the flap hat is ready.

The lapel in this model is 6–8 cm.

Knitted stocking cap for men: photo tutorial

It is best to choose soft threads (wool + acrylic) for such a hat. For knitting you need to stock up:

• yarn – 150 g;
• knitting needles No. 2.5 and No. 3;
• thread and needle.

For this option, it is better to choose stocking needles. For a hat size 54–58, you need to cast on 158–170 stitches on needles No. 2.5. Knit with an elastic band 1X1 to a height of 5 cm. Evenly decrease 30-34 loops, transfer the work to needles No. 3. Raise the work up 30 cm, close all the loops. Now you need to turn the resulting pipe into a beautiful stocking hat.

Men's hat with visor knitting with knitting description

Stylish knitted double hat for a teenager: diagram with description

A double hat is warmer because it has a double wall, but knitting it also requires more yarn and patience.

Cooking:

• yarn – 250–300 g;
• stocking needles No. 3 or No. 3.5.

We knit a double cap size 58 as follows.
To make a double-sided set of 112 loops, how this is done is shown below in the video lesson.
Knit 37 cm in stockinette stitch to one side and make a pattern. We offer possible options jacquard patterns that can be used for decoration double caps.




After completing the pattern, you need to evenly round the product both at the bottom and at the top. To do this, decrease at the beginning and end of each knitting needle in each row.


Decrease on all four needles, a total of 10 loops should remain, pull the torn yarn through them and tighten the product.

Knitted cap: photo ideas, knitting patterns

For such a cool men's “shapuli” you will need:

• knitting threads – 200–250 g;
• knitting needles No. 5, preferably on a fishing line.

1. Cast on 90 stitches.
2. Use a 2X2 elastic band to raise 5–8 cm.
3. Afterwards, knit 10 cm in stockinette stitch. If desired, on this part you can do jacquard pattern or inscription.
4. Decrease 15 stitches evenly in one row. Knit another 10 cm.
5. Cut another 15 stitches evenly. Carry out this reduction of 15 loops every 8–10 cm.
6. After 30 loops remain on the knitting needles, thread the yarn through them and tighten. Make a tassel or pompom at the end of the product.

Of course, not every man will agree to wear this version of the “shapuli”, so we offer options for caps of a more classic style.

How to knit a hat with earflaps for a teenage boy: photos and diagrams with descriptions

Ushanka is one of the latest trends among young people. We offer you to see what modern earflaps look like.





And this beauty is quite easy to knit.

Simple children's hat for a boy with a pompom knitted

To knit such a cute hat for your child, you need to stock up on:

• 150 g yarn;
• knitting needles on fishing line No. 4 and No. 4.5;
• needle and thread;
• scissors.

Cast on 108 stitches on needles No. 4 and mark the beginning of the row with a marker. Knit in the round, raise the 2X2 elastic band 5 cm up. Knit the work on knitting needles No. 4.5. Now knit the initial part of the cap as follows:

• first row: 1 purl (edge) loop, pull a knit stitch from the broach, knit 15 knit stitches, 2 purl stitches, pull one knit stitch from the broach, 15 knit stitches, and so on until the end of the row.
• second row: 1 purl (edge), 16 knit stitches, 2 purl stitches, 16 knit stitches, etc.

Pull the yarn through the loops that remain open and pull them together. Make a pompom.

Using a needle and thread, sew it on the top of the head.

The description is given for a hat without ears; if necessary, they can be knitted separately.

Patterns for knitting men's hats

We’ve sorted out the question of how to knit a men’s headdress, now I want to focus on patterns that will look great on men’s hats.

Zigzag pattern

This intricate pattern is made according to the diagram below.


But how you can use such zigzags in knitting a hat is described in detail in the video master class below.

Pattern Protector

Diamond pattern

Beautiful, discreet, laconic pattern. Suitable for making a headdress for both a teenage boy and an older man.

Norwegian pattern

The Norwegian, or jacquard pattern as it is also called, is not that difficult in itself to perform. It is based on knitting patterns in a color different from the main one on the front surface. His patterns have already been given in the description of knitting a double hat for a teenager. Here are some more fun ideas to consider.

Pearl pattern

The pearl pattern is one of the most popular among beginners. It is knitted very simply, but the products look rich and voluminous. For those who are just getting acquainted with the art of knitting, this is the best option.

Two-color pattern

Chess pattern

Suitable for simple everyday hats.

The best models of knitted hats for men: ideas with photos

Cool knitted hats for boys: photos

An accessory such as a hat can be not only warm and functional. Craftswomen knit really cool creative hats. We present to your attention photo ideas of the coolest hats for boys:

And older “boys” will like the following ideas for cool hats.

Video: how to knit a fashionable men's hat with knitting needles